The monitoring system based on dual sim 5g router network avoids hidden danger. The forest area is monitored 24 hours a day by cameras and various sensors.

1. Industrial sim router applied to forest fire monitoring
There are two ways to monitor forest fires. One is the traditional watchtower, which
covers a larger area of observation and has a better effect. However, due to the
limitation of topography, it also has the disadvantages of small coverage, dead corner
and blank, and can not be observed.
The second is video monitoring, but manual monitoring is easy to cause naked eye
fatigue, fire in the video is not easy to be detected, the failure rate is very high.
Traditional site supervision costs a lot of manpower and material resources and is
inefficient. The visibility over the fire site is very low during a forest fire, and
traditional observers cannot observe the ground fire situation in detail, and there are
potential safety risks caused by heavy smoke.
The monitoring system based on dual sim 5g router network avoids this kind of
hidden danger. The forest area is monitored 24 hours a day by cameras and various
sensors, and the monitoring data is transmitted to the management platform for
analysis through 4G data transmission terminal. According to the temperature,
humidity, wind, wind direction and other environmental factors, the possible spread
of fire and fire spread speed can be deduced, which provides a strong scientific basis
for rescue, decision-making and command.
The wireless monitoring system scheme of forest fire prevention has realized the
standardization, scientization and informationization of forest fire prevention work,
and truly realized the early detection and early solution of fire hidden situation.
Digital forest monitoring has become a necessary means for early detection and
elimination of forest fire, which improves the efficiency and quality of forest
environmental protection.
Visit E-Lins Technology for more information.