This powerpoint shows an HP Velotechnik tadpole trike Scorpion FS can be converted to electric-assist with Falco f7.9 eBike System

1. HP Veloctechnik
Scorpion
Conversion
Sept 09, 2019
This presentation is company confidential and can not be shared with
any third party without proper authorization.

2. Scorpion FS + f7.9
Scorpion FS F7.9
2

3. Scorpion FS Drop-Outs are Perfect for a Falco
Conversion
3

4. Scorpion FS Drop-Outs are Perfect for a Falco
Conversion
4

5. Falco Axle Fit into the Drop-Outs
5
Axle Fit is Great

6. Axle fit on the Drive Side
6
Axle Fit is Great
Mark on the Axle is
pointing to the back
of the trike

7. Axle Fit
Non-Drive Side (Cables Down) Drive Side (Axle Mark to the Back)
7
Axle Fit is Great Mark on the Axle is
pointing to the back
of the trike

8. Hardware on the Non-Drive Side (Looking from
the Rear)
8
12mm Nut
(Tighten to 40Nm)
Washer Torque Arm 2x Washer Torque Bar (Anti Rotation)

9. Hardware on the Non-Drive Side (Looking from
the Side)
9
Torque Arm 1
Torque Arm 2
12mm Nut

10. Drive Side Hardware
10
12mm Nut
(Tighten to 40Nm)
2x Washer
Torque Bar (Anti Rotation)

11. Drive Side Hardware
11
12mm Nut
2x Washer
Torque Bar (Anti Rotation)

12. Li9 Battery Mount
12
Three Bolts

13. Li9 Battery Mounted on the Drive Side
13

14. Li9 Mounting
14

15. Console Mounting
15

16. Throttle Mounting
16

17. Cable Routing
17

18. Dual Li9 Batteries
18

19. Dual Li9 Batteries
19

20. Console Mounting
20

21. Finished Trike
21