GasGrab™ has a single purpose – to significantly reduce the risk of injury when lifting or moving heavy gas cylinders. With GasGrab™, the operator takes up an improved posture whilst lifting.

1. Design
GasGrab™ was designed by Lionel Foster, a welder/fabricator, at a time
when he was suffering from a complaint that gave great discomfort
whenever he had to move or change a gas cylinder. Although Lionel
was in pain whilst moving gas cylinders, his attitude was 'work must go
on' and so in 2000, GasGrab™ was conceived.
Since then GasGrab™ has been modified and improved into the patented
unit available today. Made from Die-Cast Aluminium, GasGrab™ has
been designed to be light and rigid without compromise to strength. The
durable, warm-touch coating improves operator safety and comfort.
GasGrab™ has a single purpose – to significantly reduce the risk of
injury when lifting or moving heavy gas cylinders. With GasGrab™, the
operator takes up an improved posture whilst lifting.

2. Versatility
Simple and versatile, GasGrab™ is ideal for every industry where high-
pressure gas cylinders (gas bottles) are used, for instance:
• Hospitals and other Health Care establishments
• Licensing trade and Restaurants
• Welding & Fabrication
• Retail shops selling balloons
• Event organisers
• Building & Demolition
• General Engineering
Why buy a GasGrab™?
GasGrab™ helps eliminate injury by allowing the operator to take a
healthier posture while lifting or moving a gas cylinder - protecting the
back, shoulder and abdominal muscles. With GasGrab™’s patented
design, the weight of the cylinder determines the clamping force
required to lift the cylinder.
You can be assured that GasGrab™ has been tested well in excess of
the weight of a full cylinder of gas, and as such has been issued with a
test certificate - a copy is included with every GasGrab™ sold.
BEFORE USING GasGrab™, THE OPERATOR MUST BE FIT AND ABLE TO
HANDLE THE LOAD HE/SHE IS ATTEMPTING TO LIFT
• Ensure that the words “THIS WAY UP” are facing upwards.
• Rotate the handles of the GasGrab™ downwards into the
open/clearance position.
• Lower the GasGrab™ downwards over the gas cylinder until it
reaches a safe lifting point.
• SAFETY ADVICE: The safest clamping point to lift a cylinder from
is with the GasGrab™ clamped above the centre point of the
vertical cylinder body. This stabilises the gas tank's balance when
being moved.
• Pull both handles of the GasGrab™ upwards, this will cause it to
clamp onto the cylinder body.
• REMEMBER: If you relax your upward pressure on the GasGrab™,
it will relax its grip and may slide down the cylinder body, so
always lift with both GasGrab™ handles at the same time.
• Using a safe lifting technique, raise the gas bottle from the floor.
• When using a team lift, ensure that one person is in overall
control of the lift.

3. • Carefully move the cylinder to its setting down point.
• Ensure that the setting down point is clear of obstructions. Place
the cylinder down, maintaining control at all times.
• Remove the GasGrab™ by releasing your upward pressure and
slide the GasGrab™ up and off the bottle.
• Secure the gas tank to ensure it cannot topple over and fall.
Full operating instructions and Safety certificate are included with
every GasGrab™ sold.
GasGrab™ is a property of Arrow (Newbury) Ltd.
Marketed in India by Project Sales Corp, 28 Founta Plaza, Suryabagh,
Visakhapatnam 530020 www.pschandsfree.com email
info@projectsalescorp.com