1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 26, 2012
Name-Surname Mr.prissada Chuachai
Student ID. 53211819
Group Name Bork-Korn=Thai
Engineering Golf(04),Champ(19),Bank(30),June(31)
Team Members
Product Design P’Duk-dik
P’Friend
Team Members P’Ake
P’Elle
Weekly Progress
For this week is third week for discussion in my group. We are meeting at KMUTT
(Bangkuntien).In the morning professor of architecture presentation about “Need”. It is
customer’s needs. In the afternoon, My group have brainstorm about appliances in the home at
the most comfortable. After that, In concussion be made about cooker hood. I have received from
senior about materials can be used to make kitchenware and the materials don’t absorb odors. I
had to find information about it. Most of the material it is made, It is aluminum because it is
flexible and it can bend up easily, smooth surface because if the rough surface will be at here by
oiliness and soot. Then it is difficult to clean. Internal devices. Withstand heat better, Non
corrosive. System internal will be knowledge of physics about internal air passages. It is subjects
dynamic. Fine all the information. Can be used as a reason to this project
Figure 1.Cooker hood Figure 2. Interiors
Engineering Analysis
Strong Point
- Teamwork
- Thinking logically
Week Point
- Senior use long time in the conclusion of work
- Careless
Next Week Job
Engineering Team will present, Obtaining from doing the research, To the Designing
Team and later deveiop the products intoreality
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 26, 2012
Name-Surname Mr.prissada Chuachai
Student ID. 53211819
Group Name Bork-Korn=Thai
Engineering Golf(04),Champ(19),Bank(30),June(31)
Team Members
Product Design P’Duk-dik
P’Friend
Team Members P’Ake
P’Elle
Weekly Progress
For this week is third week for discussion in my group. We are meeting at KMUTT
(Bangkuntien).In the morning professor of architecture presentation about “Need”. It is
customer’s needs. In the afternoon, My group have brainstorm about appliances in the home at
the most comfortable. After that, In concussion be made about cooker hood. I have received from
senior about materials can be used to make kitchenware and the materials don’t absorb odors. I
had to find information about it. Most of the material it is made, It is aluminum because it is
flexible and it can bend up easily, smooth surface because if the rough surface will be at here by
oiliness and soot. Then it is difficult to clean. Internal devices. Withstand heat better, Non
corrosive. System internal will be knowledge of physics about internal air passages. It is subjects
dynamic. Fine all the information. Can be used as a reason to this project
Figure 1.Cooker hood Figure 2. Interiors
Engineering Analysis
Strong Point
- Teamwork
- Thinking logically
Week Point
- Senior use long time in the conclusion of work
- Careless
Next Week Job
Engineering Team will present, Obtaining from doing the research, To the Designing
Team and later deveiop the products intoreality
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/weeklyreportweek3-120131113503-phpapp02/85/weekly-report-week3-1-320.jpg)
