Flow Rate Indicator (Models : P-181 or. F-181) Type of Meter : Insertion Paddle Wheel type Flow Rate Indicator Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic, <100 micron in dia. & length Mounting : Field or, Panel Pipe Line size : min. 15 mm up to 500 mm Pressure drop : Less than 0.1 bar Pulses : 4 Pulses each rotation Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s Repeatability : +/- 0.5% Linearity : +/- 2% of full scale Enclosure : Weather proof IP 65 Gland : PO7 Fitting material : ABS, SS304 or, SS316 Fitting Type : Threaded, Flanged, Weld on Adaptor Flow Ranges : min. from 4.33 to 58000 LPM Max. Operating Temperature: 60° C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter Paddle : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C) Indicator Housing : Polycarbonate O-rings/Pin : Viton/Hastealloy C Sensor Rod : PP or, SS316 Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and 12 Kg/cm2 for SS Sensor with SS fitting. Display : 16 X 1 alpha-numeric LCD display with Backlit Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D) Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK Supply : 230 V AC +/- 15%, 50 Hz T Fitting : It is compulsory with PP or, SS 316 Flow Sensors (Selection from TYPE OF T-FITTINGS)