My c.v

1. P a g e 1 | 2
Mohamed Mahmoud Ahmed El-Refaey
Mechanical Engineer
Eng.refaey.m@gmail.com 00971-565663300
Abu Dhabi B.o.Box 4054 www.linkedin.com/in/mohamed-el-refaey-1b47b212a
PERSONAL INFORMATION
- Date Of Birth : 30/08/1993
- Nationality : Egyptian
- VISA : Visit Visa (from 28/03/2019 to 28/06/2019)
- Languages : Arabic: Tongue Language
: English: Very Good at Writing, Reading and Speaking
EDUCATION
BSc in aeronautical Engineering
Institute of Aviation Engineering and technology 06/2017
GPA: 3.5
WORK EXPERIENCE
- TEBA For Constructions & Trading-Egypt 07/2018 to 3/2019
Mechanical Engineer
Site and Technical Office Engineer For MEP (HVAC _ Fire Fighting _Plumbing) systems.
At Zone 5 _ EL Mansoura 1 (QASR MASR) _ New Administrative Capital of Egypt.
- EL EMAM For Engineering & Projects-Egypt 06/2018 to 07/2018
Mechanical Engineer
Technical Office and installation For MEP (HVAC _ Fire Fighting) systems.
- KODOMO-Egypt 07/2016 to 09/2016
3D Modeling Designer by CATIA V5
TRAINING
- Engineers House (certificated) 26/02/ 2018 to 26/04/ 2018
Engineers House Training program of (HVAC-Firefighting-plumbing) systems design
- TIBA CONSTRUCTION 05/02/ 2018 to 25/02/ 2018
Firefighting and plumbing installation training in the new administrative capital of Egypt.
- Egypt Air Training (certificated) 03/08/ 2014 to 28/08/ 2014
Training in aircraft maintenance at Cairo airport (Engine maintenance and Airframe) Tools and instruments calibration.

2. P a g e 2 | 2
GRADUATION PROJECT
- Design of Micro Jet Engine
It is a Micro Gas Turbine (MGT) engines. They are used on un-manned aerial vehicles (UAVs) and as auxiliary power units
(APUs) for modern aircraft. MGTs are also used in hybrid electric vehicles and small electricity generators.
Grade: Excellent
UNDERGRADUATION PROJECTES
- ROV 2016 competition (certificated) 11/2015 to 05/2016
Participated for second time as Mechanical Team leader with much developments in mechanical
and isolation system
- ROV 2015 competition (certificated) 11/2014 to 05/2015
Participated as Team member for Under Water Remotely operated vehicle worked in mechanical
and structure design for vehicle and isolation system of electric box and motors
- Mine Sweeper Competition 06/2014 to 08/2014
Participated as team member for quad-copter and car based robot searching for simulated metals mines
- Aircraft models Trainer in aviation club saray el koba.
My best hobby is build airplane models and UAVs.
I have built many models and subscribed as a manufacturer in some UAV graduation projects.
COURSES
- HVAC systems Design (certificated).
- Firefighting systems Design (certificated).
- Plumbing systems Design (certificated).
- AutoCAD 2D.
- REVIT MEP.
- CATIA V5 3D modeling design.
- ICDL.
- Matlab.
- Maintenance Basic Course for Aeronautical engineers (Airframe / Power plant)
Approved part 147 by ECAA/AW/TL/D0104/R0 (certificated).
COMPUTER SKILLS
- CATIA V5 : Excellent
- AutoCAD - 2D : very Good
- REVIT MEP : very Good
- Matlab : very Good
- Elite : very Good
- HAP : very Good
- MS Office : Excellent
SOFT SKILLS
- Ability to Work in-group and under pressure.
- Rapid acclimation to new operating condition.
- Strategic thinking and planning skills.
- Fast learning and self-developing.