How to use a Portable Foldable Wheelchair Ramp

1. www.medlisramps.com
info@medlis.com.tr
Instructions
for Use
FOLDABLE
WHEELCHAIR
RAMP

2. Thank you for selecting this MEDLIS Ramps
product.
Please read the instructions below in order to
use the equipment in the best conditions.
General Informations:·
- Use the ramp only on firm ground.
- Always move to the center of the ramp.·
- Beyond 2 meters, provided foot supports
must be added (See paragraph "Support
Feet").*
- Always fold and unfold the ramp on the side
which placed on the casters.
- The maximum loading capacity is 350 kg
PORTABLE & FOLDABLEREADY TO USE IN SECONDS EASY TO USE
Move the ramp to the place of use on
wheels.
Unfold the ramp on the wheeled and lay it
on the floor.
Set up the ramp, making sure the top of
the ramp rests on the step (at least 10cm).
Setting up :
1.
2.
3.
To fold the ramp, do the reverse process. You
can store it vertically or horizontally, in a
place where it is quickly and easily accessible.
Installation of Support
Feet:
Tools needed: 17mm Allen
wrench + 17mm flat wrench.
Unscrew to separate the two
ramp sections.
Reassemble them with the
large screws provided by
inserting the foot holder.
Attention, the foot must
always be positioned outside
the ramp.
Adjust the foot heights by
unscrewing the bases to
compensate for possible
gaps.