Kurt Cast Iron Caged Toolblox

1. NEW!
Cast Iron Caged ToolBlox
• 2 Face and 4 Face Modular ToolBlox

2. 2 FACE AND 4 FACE MDDULAR TOOLBLOX™, SUB-PLATES
MODULAR TOOLBLOX™
2-SIDED TOMBSTONE CAGE 4-SIDED TOMBSTONE
2 Face Modular ToolBlox™ DIMENSIONAL DATA CAGE DIMENSIONAL DATA
TC2F40616 TC2F50820 TC4F40808 TC4F51010
Here’s a new lighter weight building block module to
add high density and versatility to most model horizontal A 400mm 500mm 400mm 500mm
machining centers. It is over 30% lighter than comparable B 1.250 1.250 1.250 1.250
size tombstones with aluminum sub-plates. Provides a C 1.970 2.360 1.970 2.360
lower cost alternative to dedicated fixtures. Features bolt D 25.000 28.000 25.000 28.000
holes and dowel pattern on each face for fast installation E 24.625 27.625 24.625 27.625
and removal of sub-plates and other workholding F 6.000 8.000 8.000 10.000
components. Built out of Steel. G 0.875 0.875 0.875 0.875
JJ H 2.000 2.000 2.000 2.000
±0.001 "KK" A TAPPED
F S.F. FOR G N N HOLE J 3.375 3.375 3.375 3.375
G DOWEL M M 16-HOLES
DR & C'BORED FOR K 9.125 10.500 9.500 10.625
"R" SHCS (4X) 4-HOLES 2-FACES
Q 2-FACES L 1.750 2.000 1.000 1.750
P "O"
GG RAD FF M 0.875 1.000 2.500 3.375
K TYP (3X)
EE N 5.500 7.125 5.000 6.750
1/2 OF " (2X)
P "A" O 0.750 0.750 0.750 0.750
±0.001 D
L DD P 6.299 7.874 6.299 7.874
E (3X)
Q HH Q 12.598 15.748 12.598 15.748
EE
A (2X) R 5/8 5/8 5/8 5/8
GG FF
K (3X) S 0.709 0.709 0.709 0.709
T 2.165 2.165 2.165 2.165
1/2 OF B DD CC
"A"±0.001 J U 4.330 4.330 4.330 4.330
A H (3X)
"C" X 45∞ V 2.953 2.953 2.953 2.953
Y S T
(4X) "X" TAPPED U S
V W 5.906 5.906 5.906 5.906
HOLE (5X) W
AA 5/8-11NC 5/8-11NC 5/8-11NC 5/8-11NC
BB X
x 1" DP x 1" DP x 1" DP x 1" DP
Y 0.984 0.984 0.984 0.984
4 Face Modular ToolBlox™ AA 7.500 9.4375 3.625 4.625
BB 15.000 18.875 7.250 9.250
This 4 sided tombstone is another lower cost
CC 4.625 4.625 5.125 5.125
option over dedicated fixtures. It is over 30%
DD 1.000 1.000 1.000 1.000
lighter than comparable size tombstones with
EE 4.125 4.625 4.125 4.625
aluminum sub-plates and is designed to reduce
FF 8.250 9.250 8.250 9.250
setup time. Provides versatility for mounting
GG 6.250 7.250 1.500 1.500
manual and hydraulic vises and most clamping
HH 11.250 12.750 4.125 4.625
devices. Standard and custom sub-plates are also 3/8-16NC 3/8-16NC
JJ 8.250 9.250
available. Built out of Steel. x 0.88 DP x 0.88 DP
0.375ø 0.375ø
"MM" KK 5.750 6.750
"NN" x 0.75 DP x 0.75 DP
±0.001 S.F. FOR ±0.001 TAPPED HOLE
F F LL – – 11.250 12.750
G N DOWEL G 12-HOLES
M 4-HOLES 4-FACES 3/8-16NC 3/8-16NC
DR & C'BORED FOR MM – –
"R" SHCS (4X) 4-FACES x 0.88 DP x 0.88 DP
Q 0.375ø 0.375ø
P "O" NN – –
KK FF x 0.75 DP x 0.75 DP
RAD JJ
K Wt. Lbs. 326 546 245 361
TYP EE Wt. Kgs. 148 248 112 164
HH
P E
D L GG DD
A LL D
Q E
1/2 OF K JJ KK FF
"A" ±0.001
EE
HH
1/2 OF BS GG DD
J CC
"A" ±0.001 H
A
"C" X 45∞ (4X) T Y Y
"X" TAPPED U B AA S
HOLE (5X) V BB
W
Sub-Plates
X Z
• Kurt offers a variety of standard ToolBlox • All Kurt ToolBlox sub-plates are doweled
sub-plates for your application. and bolted to the Kurt Modular ToolBlox
MODEL TC2F40616 TC2F50820 TC4F0808 TC4F51010
• Please specify A36 HRS or 6061 T6 allowing the quickest change possible
X 15.700 19.600 8.000 10.000
Aluminum. for dedicated fixtures.
Y 23.700 26.700 23.700 26.700
• You may specify optional hole patterns • You can permanently mount Kurt vises
Z 0.940 0.940 0.940 0.094
and/or keyways. to the ToolBlox sub-plates for fast, easy
• All Kurt ToolBlox sub-plates are rotary set-up changes on milling machines. Note: Outside dimensions of A36 steel or 6061 T6
ground to ±0.001" thick. • Kurt grid plates are also available with aluminum plates are cut dimensions.
a 2" x 2" hole pattern
www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313