As we all know, the standard specifies MPO as a connector to the 40GBASE-SR4 QSFP+ transceiver. To connect a QSFP+ to QSFP+, we usually use a MTP 12-fiber trunk cable. In the 40GBASE-SR transmission, there are eight fibers associated with the channel—four fibers for the TX signal and four fibers for the RX signal. Therefore only 8 of the 12 fibers are used, where the remaining four are not used, and can optionally be not present in the cable. So we can also choose a MTP 8-fiber trunk cable for connectivity. Besides this, there are a number of other factors also needed to be considered when to choose a right MTP trunk cable for 40GBASE-SR4 QSFP+ connectivity. This article explains 40GBASE-SR4 QSFP+ to 40GBASE-SR4 QSFP+ cabling selections.
1. WHITE PAPER
Fiberstore (FS.COM) | 40GBASE-SR4 QSFP+ Transceiver Interconnection Cabling
As we all know, the standard specifies MPO as a connector to the 40GBASE-SR4 QSFP+ transceiver.
To connect a QSFP+ to QSFP+, we usually use a MTP 12-fiber trunk cable. In the 40GBASE-SR
transmission, there are eight fibers associated with the channel—four fibers for the TX signal and
four fibers for the RX signal. Therefore only 8 of the 12 fibers are used, where the remaining four
are not used, and can optionally be not present in the cable. So we can also choose a MTP 8-fiber
trunk cable for connectivity. Besides this, there are a number of other factors also needed to be
considered when to choose a right MTP trunk cable for 40GBASE-SR4 QSFP+ connectivity. This
article explains 40GBASE-SR4 QSFP+ to 40GBASE-SR4 QSFP+ cabling selections.
Use Single-mode or Multimode MTP Trunk Cable?
In the market, both single-mode and multiode MTP trunk cable are available. Which one should I
use? According to 40GBASE-SR4 standards, 40GBASE-SR4 QSFP+ transceiver supports link lengths of
100 meters and 150 meters, respectively, on laser-optimized OM3 and OM4 multimode fibers.
Therefore, to connect a 40GBASE-SR4 QSFP+ to 40GBASE-SR4 QSFP+, we should choose OM3 or
OM4 multimode MTP trunk cables. If you want to achieve a relatively longer transmission distance,
OM4 MTP Trunk cable is more suitable for you.
40GBASE-SR4 QSFP+
Transceiver
Interconnection Cabling
2. WHITE PAPER
Fiberstore (FS.COM) | 40GBASE-SR4 QSFP+ Transceiver Interconnection Cabling
MTP Trunk Cable Polarity Selection: A, B or C?
In terms of MTP trunk cable, there are three kinds of polarity options (A, B and C). Which one to
choose? In fact, according to the IEEE 40GBASE-SR4 specifications, we must select a type B MTP
8-fiber or MTP 12-fiber trunk cable. The picture below shows the working principle of type B MTP
12-fiber trunk cable. The type B trunk cable has opposing connectors with both keys oriented facing
up, however the fiber positions are reversed at each end i.e. the fiber at position 1 at one end is
connected to position 12 in the connector at the opposing end.
Choose Male or Female MTP Trunk Cable?
In terms of a MPO connector, it is divided into male and female types. They ensure that the adapter
holds the connector with the correct ends aligned with each other. A MPO trunk cable usually has
two MPO connector on each side. Therefore, MTP trunk cables are available in male–male and
female–female two versions. According to IEEE standards, MPO optics in a 40GBASE-SR4 transceiver
are always male connectors, and therefore will always accept female MPO connectors. So if we
want to connect a 40GBASE-SR4 QSFP+ to a 40GBASE-SR4 QSFP+ successfully, we must choose a
female–female MTP trunk cable.
4. WHITE PAPER
Fiberstore (FS.COM) | 40GBASE-SR4 QSFP+ Transceiver Interconnection Cabling
Part Number Image Description
FS8OM3-2MTP-x
OM3 Type B Female–Female
MTP8 to MTP8 Trunk Cable
FS8OM4-2MTP-x
OM4 Type B Female–Female
MTP8 to MTP8 Trunk Cable
FS12OM3-2MTP-x
OM3 Type B Female–Female
MTP12 to MTP12 Trunk Cable
FS12OM4-2MTP-x
OM4 Type B Female–Female
MTP12 to MTP12 Trunk Cable
Conclusion
In summary, if we want to complete a connection between two 40GBASE-SR4 QSFP+ transceivers,
we can choose MTP 8-fiber or MTP 12-fiber trunk cables. Cable must be either OM3 or OM4 type.
Besides, only a type B female – female MTP trunk cable can satisfy your needs. Fiberstore provides
wide brand compatible 40GBASE-SR4 QSFP+ transceivers and all kinds of MTP trunk cables. Each
fiber optic transceiver has been tested to ensure its compatibility and interoperability. Please rest
assured to buy. For more information or quotation, please contact us via sales@fs.com.
5. WHITE PAPER
Fiberstore (FS.COM) | 40GBASE-SR4 QSFP+ Transceiver Interconnection Cabling
Contact Us
Manufacturing R & D (China)
Eastern Side, Second Floor, Science &
Technology Park, No.6, Keyuan Road,
Nanshan District, Shenzhen 518057,
China
Tel: +86 (755) 8300 3611
Fax: +86 (755) 8326 9395
Email: sales@fs.com
APAC Office (Hong Kong)
1220 Tung Chun Commercial Centre,
438-444 Shanghai Street, Kowloon,
Hong Kong
Tel: +852 81763606
Fax: +852 81763606
Email: sales@fs.com
North America (United States)
331 Andover Park East Ste330, Tukwila,
WA 98188,United States
Tel: +1-425-226-2035
Fax: +1-253-246-7881
Email: sales@fs.com
London Office (United Kingdom)
Third Floor 207 Regent Street, London,
W1B 3HH, United Kingdom
Tel: +44 2081441980
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or
implied, concerning any equipment, equipment features, or service offered or to be offered by Fiberstore.
Fiberstore reserves the right to make changes to this document at any time, without notice, and assumes no
responsibility for its use. This information document describes features that may not be currently available.
Contact a Fiberstore sales team for information on feature and product availability.
Follow us
LinkedIn
Twitter
Facebook
G+
Pinterest
Youtube
Blog