Electric Heat Pump Guide: Types, Advantages & Troubleshooting
1. Electric Heat Pump
● A heating system unit is a basic need for every
home and therefore it should be cleaned regularly
and checked so as to avoid any damage. This will
make your ac unit to work more effectively and
you will tend to save a lot of money.
● In regions that have milder weather it is advisable
to buy an electric heat pump which will warm
your house, this is an added advantage for those
people who use electricity since they can cut on
cost at the end of your bills. Visit Comfortz.com
for best heating products
2. GEOTHERMAL
● This is the most efficient kind of electricity; instead
of using the temperatures from outdoors
geothermal heat pump usually use the
temperature that is from the ground so as to
access enough heat.
● It also has a heat exchanger system that so as to
help it pump the heat inside and outside of the
compound.
3. Air-Source
● These are the most used heating pumps by a lot of
people. It works very well during warm climates.
They only use a compressor and indoor coils for
it work efficiently.
4. DUCTLESS
● This type of heating system is good for those homes
that don't have ductwork. It uses an outdoor
compressor and more to that are located in the
house thus helping it to distribute heat around the
room.
5. Disadvantages
● There are also some disadvantages of using an
electric heat pump.
● One of the major disadvantages is that, it does not
stabilize its temperature appropriately since when
the outdoor temperature has reduced it takes a lot
of time and work to extract heat from the
surrounding thus causing it to use a lot of energy.
● Another disadvantage is that when the temperature
drops also the heating system will reduce, so in
order to make it more efficiently you can use a
heating coil to warm the external coils.
6. ● Instead of calling a technician about the problem in
your heating system, it's always good to check
first because it might be a simple problem that
you can be able to diagnose it.
● You can start by checking the thermostat setting, if
it's not on heat set is as required. Also check if
your circuit is broken since this might be the
cause of the problem.
●
7. ● If your system is not working even if you try to turn
it on, you should look for a reset button for this
solution and reset it appropriately by pushing the
button. Try this method for some time and it will
automatically work as desired.