2. Provide the problems that need to be solved
based on the first prototype.

3. 1)The problem is solved by
push off some of wood
because the wood make a
table heavy weight
2)The table and chair are
polished at angle of both and
surface.

4. The quality of product is save area and
It’s easy to keep.
The weight of product is lower than before
because of wood is pushed off.
You can put the table on the body of product
and keep the chair in the body

5. The manufacturing time is used in 6 hour
They don’t need money to fix it.

6. We test it by sitting the chair and
check the part of body

7. The dimension of product we create it nearly in CAD
We measure it by steel tape in every step.
The function of product is work in CAD between prototype
The product need polishing and need checking because of
We can make right shape