The document lists 11 tables and 12 figures that are included in the research. The tables provide information on the materials tested such as cement properties, aggregate properties, and test results. The figures show graphs of the results for compressive strength, split tensile strength, slump factor, and compaction factor for concretes with varying replacement of sand with quarry dust and cement. The document also lists 3 plates that show pictures of materials used including quarry dust, fly ash, mixing and curing equipment, and the compression testing machine.
1. LIST OF TABLES
Table
no.
Description of table Page
no.
Table 3.1 1 Physical Properties of Ordinary Portland cement (OPC-53) 19
Table 3.2 Properties of Fine aggregates (Natural Sand) 19
Table 3.3 Properties of Fine aggregates (Quarry Dust) 20
Table 3.4 Properties of Coarse aggregates 20
Table 3.5 Sieve Analysis Quarry Dust 21
Table 3.6 Test Programme Phase I 25
Table 3.7 Test Programme Phase I 26
Table 3.8 Test Programme Phase II 27
Table 3.9 Test Programme Phase II 28
Table 4.1 Compressive Strength of M-20 Grade Concrete 31
Table 4.2 Compressive Strength of M-40 Grade Concrete 31
Table 4.3 Split Tensile Strength of M-20 Grade Concrete 32
Table 4.4 Split Tensile Strength of M-40 Grade Concrete 32
Table 4.5 Compressive Strength of M-20 Grade Concrete with 50% replacement 33
Table 4.6 Compressive Strength of M-40 Grade Concrete with 25% replacement 33
Table 4.7 Split Tensile Strength of M-20 Grade Concrete with 50% replacement 34
Table 4.8 Split Tensile Strength of M-40 Grade Concrete with 25% replacement 34
Table 4.9 Slump Factor Values of M-20 and M-40 Grade Concrete 35
Table 4.10 Slump Factor Values of M-20 and M-40 Grade Concrete 35
Table 4.11 Compaction Factor Values of M-20 and M-40 Grade Concrete 36
2. LIST OF FIGURE
Figure
No
Description of figure Page
No
4.1 Variation of Compressive strength with percentage replacement of
sand with QD for M-20 Grade concrete
37
4.2 Variation of Compressive strength with percentage replacement of
sand with QD for M-40 Grade concrete
37
4.3 Variation of Split Tensile strength with percentage replacement of
sand with QD for M-20 Grade concrete
38
4.4 Variation of Split Tensile strength with percentage replacement of
sand with QD for M-40 Grade concrete
38
4.5 Variation of Compressive strength for 50% replacement of sand
with percentage replacement of cement for M-20 Grade concrete
39
4.6 Variation of Compressive strength for 25% replacement of sand
with percentage replacement of cement for M-40 Grade concrete
39
4.7 Variation of Split tensile strength for 50% replacement of sand with
percentage replacement of cement for M-20 Grade concrete
40
4.8 Variation of Split tensile strength for 25% replacement of sand with
percentage replacement of cement for M-40 Grade concrete
40
4.9 Variation of Slump Factor values for M-20 and M-40 Grade
concrete with percentage replacement of sand.
41
4.10 Variation of Slump Factor values for M-20 Grade concrete with
50% replacement of sand and M-40 Grade concrete with 25%
replacement of sand and variation percentage replacement of cement
41
4.11 Variation of Compaction Factor values for M-20 and M-40 Grade
concrete with percentage replacement of sand
42
LIST OF PLATES
3. Plate No. Description of plate Page No.
4.1 Sample of Quarry Dust Stone aggregate 47
4.2 Sample of Fly Ash
47
4.3 Electrical Drum Mixer of 60 lts capacity 48
4.4 Moulds kept of Vibrator 48
4.5 Curing Tank 49
4.6 Compression testing machine
50