1. DESCON ENGINEERING SERVICES & TECHNOLOGY (PVT) Limited
HSE Internship Report
Submitted by: IKRAM ALI ZARDARI
Internship Report submitted to:
o Madam Samina Wasim (Head
QHSE)
o Mr.Hafiz M.Sultan Ayub (HSE
Engineer)

2. Internship Report
1 | P a g e
DEST HSE
Table of Contents
 Introduction to engineering HSE & process safety concept in project lifecycle
 HSE management system overview
 Risk Management Techniques
 HAZOP
 Process safety in Project Life Cycle
 Overview of Loss Prevention Engineering
 Fire Water Networking
 Hydraulics of fire water system

3. Internship Report
2 | P a g e
DEST HSE
Acknowledgement:
I was selected in Future Leadership Internship Program (FLIP) offered by DESCON after
online test clearance. On the first day of my internship at DESCON, the presentation
regarding the DESCON (design & construction) future leadership internship program (FLIP)
& orientation on the health & safety was also presented & we had informed to follow all the
rules & regulations while staying at DESCON.
After the presentation, we had sent to our respective departments. As I am chemical
engineering student (final year),So I was assigned to do internship in Health Safety &
Environment (HSE) Department under-supervision of Madam Samina Wasim (HSE Head)
&Mr. Hafiz Muhammad Sultan Ayub (HSE Engineer). I was given the Internship Plan&
attendance sheet to maintain every day from your supervisor. I am grateful both of them.
This report indicates the worth of my training at the DesconEngineering Services
&Technology (DEST).
My time was spent as below:
1 hour session daily for new topic coverage
&
1 hour for group discussion on given topic

4. Internship Report
3 | P a g e
DEST HSE
Executive Summary:
On the very first day of my internship, I was introduced through my supervisor and I was also
familiarized by him to the health Safety & Environment (HSE) Department. This department
is consisted of following dynamic experienced engineers as:
Departmental Head: Samina Wasim
Lead Engineer: M.Khizar Nawaz
HSE Engineer: Hafiz M.Sultan Ayub
HSE Engineer-1: Mehak Khalil
My internship plan was made by Head of the department (Madam Samina Wasim)
sequentially from the basics to the remarkable approach as to acquire more related
knowledge (HSE) in short period of internship.
I got theoretical &practical experience in the area of Health Safety & Environment, many
valuable skills and practical knowledge was gained during internship. Throughout internship
many assignments were assigned to me by my supervisor in order to implement my
theoretical knowledge into practical field such as:
 Study of Hazard identification & risk assessment, to evaluate causes, consequences &
its control
 Risk management system (manage the risk through proper channel)
 Loss prevention engineering techniques (eradication of the loss in the plant )
 HAZOP study (Hazard & operability), in which I attained the knowledge that how
systematic techniques are taken into consideration to identify potential hazards &
operability problems & how to prepare the HAZOP study for any kind of process in
operation.
 Fire water system networking
 Hydraulics of fire water system
 Fire & Gas detection system & Mobile fire-fighting equipment.

5. Internship Report
4 | P a g e
DEST HSE
Safety Concept in Project Cycle:
1. Project Initiation
2. Project Planning
3. Project Execution (Commissioning)
4. Project Closure (De-Commissioning)
Projectlife cycle
Initiation-Starting
the project
Planning-
Organizing &
preparing
Execution-
Carrying out the
work
Closure- Closing
the project

6. Internship Report
5 | P a g e
DEST HSE
Risk Management Techniques:
Risk management techniques are an essential but often overlooked prerequisites to
successful active trading. After all, a trader who has generated substantial profits over his or
her lifetime can lose it all in just one or two bad trades if proper risk management isn't
employed. This article will discuss some simple strategies that can be used to protect your
trading profits.
Risk
Management
Technique
Identify
Assess
Evaluate
Control &
Monitor

7. Internship Report
6 | P a g e
DEST HSE
HAZOP (Hazard & Operability) Study:
 Systematic technique to identify potential hazards & operability techniques based on
team effort
 Node (any part of the complex plant is under considered)
 Based upon guide words
 It is for safety & hazards main concern & problem degrade the plant performance
 System centered approach
 Evaluate possible deviations from design intent
 Potential cause
 Deduce consequences
Guide words vs. meaning
Guide Word Meaning
NO OR NOT Complete negation of the design intent
MORE Quantitative increase
LESS Quantitative decrease
AS WELL AS Qualitative modification/increase
PART OF Qualitative modification/decrease
REVERSE Logical opposite of the design intent
OTHER THAN /
INSTEAD
Complete substitution
EARLY Relative to the clock time
LATE Relative to the clock time
BEFORE Relating to order or sequence
AFTER Relating to order or sequence

8. Internship Report
7 | P a g e
DEST HSE
Overview Loss Prevention Engineering:
An engineering involved to prevent (eradicate) the loss of (personnel, property, equipment,
product) etc. from the process carrying out, called loss prevention engineering.
This engineering involves:
 Fire potential equipment
 Fire zoning
 Fire water calculation
 Fire spray densities
 Fire & smoke detector
 Specific path for emergency evacuation
 Specific signs
 Location of hydrants/monitors
Fire Water System Networking:
 Protect life and property by installing required equipment's.
 Fire Zone Mapping
 Fire water (FW) Demand Calculation
 Calculations are done that where to place the hydrants and hoses so that they can
be operated manually.
 Two devises should provide coverage to equipment at a time.
 Water storage tank in bulk quantities
Hydraulics of Fire Water System:
A proper or appropriate approach to be familiar & authentic knowledge regarding the fire &
water for the actual amount of the water supplied for the extinguishing of the fire according to
the following parameters taken into considerations:
 Flow rate
 Pressure

9. Internship Report
8 | P a g e
DEST HSE
 Temperature
 Size of the pipe
 Thickness of the pipe
 Temperature
 Pressure
Conclusion:
Throughout my internship tenure at Health Safety & Environment department DEST
Business Area (BA) at DESCON, I became inspired and visualized by the rules & regulations
& especially the Cleanliness is its topmost pace. The culture of the organization, dedication
of the employees towards their duties is found common.
Last but not least,
RISE & SHINE DESCON….
THANKING YOU DESCON 