Raid is a storage system that combines multiple disks into an array to provide benefits like enhanced data integration, fault tolerance, and increased storage capacity or processing power. There are several common Raid types like Raid 0, 1, 5, and 10. If a Raid fails, it is important to turn off power immediately to prevent further data loss. An excellent data recovery software like iFinD Data Recovery can then be used to try restoring the lost data from the Raid array. The software allows scanning and recovering files by selecting the failed Raid device.

1. Raid Data Recovery

2. Raid Data Recovery
Raid is a very efficient and secure storage system. It combines several inexpensive hard disks into a
hard disk array, The aim is to make the performance reach or exceed an expensive and huge
capacity hard disk.
Benefits of Raid:
Enhance data integration level.
Enhanced fault-tolerant ability.
Increase processing capacity or storage capacity.
According to different needs and budgets, the raid can be divided into many types. Basically,
Raid0, Raid1, Raid5, Raid10 are more common. Next, we will talk about the classification of the
raid and how to restore raid.
1: Classification of Raid:
2: What should we do after Raid fails?


3. 3: How to recover lost data on Raid using data recovery software?
1. Classification of Raid:
Raid 0：
Connect two or more hard disks together to form a large hard disk. The data will be segmented
write into these hard disks. Since the data is read by parallel storage, Raid0 does not have fault
tolerance, but it will increase the capacity of hard disks and speed of processing.
Raid 1：
Two or more hard disks are mirrored to each other. Data is written to the main hard disk, and the
same data will be written to the mirror hard disk. If the main drive is damaged, all data is saved on
the other drive. So you don’t lose data. Raid1 has the best fault tolerance, but disk utilization is
minimal.
Raid 5:
Raid 5 is made up of more than three hard disks. It divides all the data into blocks and parity
blocks and stores them in all hard drives. This will ensure that the data is complete in any N-1 hard
drive. Anyone hard disk damage will not cause data loss. Raid 5 is a compromise between Raid 0
and Raid 1, combining fault tolerance and disk capacity utilization. Is currently the most popular
solution.
Raid 10:
Similar to Raid 5, both are equally fast in reading and writing data. When one hard drive fails, the
data can be recovered smoothly. When a failure occurs, the recovery time for raid 10 is much less
than for raid 5. The disk space utilization of Raid5 is higher than Raid 10. In short, Raid 5’s disk
space utilization is higher than Raid 10’s, but Raid10’s security is higher than Raid 5’s.
2: What should we do after Raid fails?
Raid has fault tolerance mechanism, which can automatically restore damaged data in some cases.
But if it goes beyond the scope, for example, two hard disks on Raid 5 are damaged, the lost data
cannot be recovered automatically. At this time, choosing an excellent data recovery software can
help you restore the data on raid.
The main reason for the failure:
The Raid array card fails.

4. Disk physical failure, such as bad track, disk error, disk response time too long, raid 5 damage
more than 2 disks.
The array cabinet or server is suddenly powered off without UPS protection.
After the hard disk sequence is mistaken, start the system, or blindly change the array
configuration information.
Reconfigure RAID disk array information
The power supply is unstable, resulting in the loss of raid information.
Because the server stores important data. Avoid secondary data damage. Please operate cautiously
after a failure. After failure, please turn off the power immediately, contact the server aftermarket
center as soon as possible to ensure data security. Don’t do rebuild reorganization after array
information is lost. Of course, it is absolutely safe to use iFinD Data Recovery for data recovery.
3: How to recover lost data on Raid using data recovery software?
Raid has a fault tolerance mechanism, which can automatically restore damaged data in some
cases. But if it goes beyond the scope. At this time, choosing an excellent data recovery software
can help you restore the data on the Raid.
Now, we guide how to use iFinD Data Recovery to recover lost data on RAID device:
Step1: Download and install the latest version.
Step2: Select the first feature, “Lost Partition Recovery,” and select the Raid you need to restore.

5. OUR PRODUCTS
iFinD Data Recovery
iFinD Photo Recovery
HOWTO & TIPS
Step3: When the scanning is finished, all the files found will be listed, and the files you need to
restore will be saved locally.
Notice: Do not save files on an external hard drive that is being restored. The wrong operation will
cause permanent damage to the data, and then, cannot be recovered.
Raid is a very complex storage device, and the data stored in it is also very important. When a fault
occurs, the first step should be power off, and contact the equipment supplier, you can try ifind
data recovery software to restore. However, due to the unique design of Raid, data cannot be fully
recovered occasionally. Therefore, our daily maintenance is very important, we must be very
careful to avoid failure.
Source: https://www.ifind-recovery.com/how-to/raid-data-recovery/