CustomTech Flooring Preparation Systems is the latest product line from CUSTOM Building Products. Each solution - for patching, priming, moisture control, and self-leveling underlayments - is formulated to exceed industry standards. The CustomTech line comes with the combined support, resources, and industry knowledge of CUSTOM and its parent company, The QUIKRETE Companies. 25 year system warranty available.

1. Flooring Preparation & Installation Products
Surface Preparation Products
Moisture Vapor Control
Self Leveling
Patching
Use Under All Floor Coverings

2. Moisture Vapor Control
TechMVC
Moisture Vapor and
Alkalinity Barrier
• 100% solids epoxy resin
• Rated for 25 lbs. MVER, 100% RH
• Apply at 8.5 mils
• Pigmented red for uniform application
• Cures in 3-4 hours

3. Patching Compounds
Silk
Patching & Finishing
Compound
 Smooth finish - excellent for
skim coating under soft floor
coverings
 Sandable without overwatering
 Apply from featheredge to 1”
 Install flooring in 30-90 minutes
TechPatch MP
Multipurpose Rapid
Setting Skim Coat &
Floor Patch
• Use over wood and concrete
• Apply from featheredge to
1/2”
• Install flooring in 30-90
minutes
TechPatch RP
Ramping Patch
• Ramping, patching and
transitions
• Can be used over primed
ceramic tile, and other non-
porous surfaces
• Apply from featheredge to 1.5”

4. Flooring Preparation & Installation Products
TechPrime A
Acrylic Primer
 Use over porous & non-porous surfaces
 Single component
 Solvent free
 Alkaline resistance – pH 14 stable
 Solvent free
Primers
TechPrime E
100% Solids Epoxy Primer
 Strongest bond of any primer
 Use over non-porous & porous surfaces
 Use under floor coverings subjected to heavy
point and rolling loads
 Low odor and VOC compliant

5. Flooring Preparation & Installation Products555
TechLevel-100
Calcium Aluminate Based
Self Leveling Economy
Underlayment
A quality, economy grade
underlayment.
+4,100 PSI compressive strength.
Install from 3/16” to 1-1/2”
5
TechLevel-150
Calcium Aluminate Based
Self Leveling Premium
Underlayment
High flow and superior crack resistance
4,300 PSI compressive strength
Install from 1/8“ to 1-1/2"
Self Leveling Compounds
TechLevel-125
Calcium Aluminate Based
Self Leveling
Deep Pour Underlayment
A deep pour self leveling
underlayment that achieves up to
4,000 psi Compressive strength.
Install from 1/4” to 3”

6. Flooring Preparation & Installation Products6666
TechLevel-WSF
Calcium Aluminate Self Leveling
Underlayment for Wood Subfloors
Fiber reinforced, install over plywood and
OSB ubfloors without reinforcing lath..
3,500 PSI compressive strength.
Install from 1/4” to 1-1/2”
Self Leveling Compounds
TechLevel XP-1
Calcium Aluminate Based
Self Leveling
High Performance Underlayment
Abrasion resistant: Holds up to
traffic during construction,
5,000 PSI compressive strength
Install from 1/8" to 2"
TechLevel – HPT
Calcium Aluminate Based High
Performance Topping
Seal or mechanically polish for wear
resistant floors. +6000 PSI
compressive strength.
Install from 1/4” to 1”

7. For more information or assistance:
Howard Jancy
hjancy@cbpmail.net