Materials: Vice Grips Round Nose Pliers Wire Cutters Needle Nose Pliers 3mm Pearls Ring Mandrel 6mm Jump Ring Earwire Teardrop Bead Two 1 Inch Long Popsicle Sticks 10 in. Piece of 20 and 24 gauge wire. Steps: Step 1: Twist your 20 gauge wire. Step 2: Make a sandwich with the popsicle sticks and wire. Use vice grips to tighten grip and twist other side of wire with needle nose pliers. Step 3: Wrap wire around ring mandrel. Seperate one end and hook it around the loop. Step 4: Make a 90 degree bend with the chain nose pliers. Step 5: Grip with round nose pliers and wrap around to make a loop. Step 6: Slide teardrop onto jump ring. Step 7: Insert jump ring and bead onto the wire. Step 8: Wrap other wire around two or three times. Step 9: Insert bead and twist wire through until desired amount of beads is reached. Step 10: Wrap wire around beads to ensure stability. Step 11: Insert earwire and it's complete.