Materials: - 5.9" of 20 gauge wire, - 23.6" of 28 gauge wire - various glass beads Tools: โขround-nose pliers โขwire cutters Step 1. Make a small loop at the end of the wire and bend it as shown on the photos. Step 2. Bend the wires as shown on the photos to create tree shape. Make a small loop at the bottom of the "tree". It would be a trunk of the tree. Step 3. Close the tree shape, and trim the wire which left. Smooth the edges Step 4. You have to fill the tree shape with beads. Start from wrapping the thin wire few times at the top of the tree, then put the bead onto the wire, and wrap it to the second part of the base. Then, again put the beads, and wrap the wires at the "left" part of the base. Repeat this move till the tree shape will be filled with beads. Then trim the wire which left. Step 5. Now just add the chain to the pendant. It is ready to wear!