Aluminium is a silvery white reactive metal that is typically protected by a tough oxide covering. Aluminum wire rod is also the most readily accessible and cost-effective bike component for racing and mountain bike frames.

1. What Are the
Benefits of Using
Aluminums
Wire/rod?
By – Ganpati Engineering Industries

2. Introduction
Aluminums wire rod is manufactured at the
Bratsk, Kandalaksha, and Irkutsk Aluminium
Smelters. Wire rod is frequently used to
make wires and cables, as a deoxidising
agent in ferrous metallurgy, and to make
hardware.

3. Light Weight
It is a well-known lightweight metal with a
specific weight of about 2.71 g/cm3. It is
around one-third the weight of steel, making
it easier and less expensive to transport than
most other metals.

4. Corrosion Resistance
Aluminium is a corrosion-resistant metal
that produces a protective covering on its
own. When aluminium comes into touch
with an oxidising atmosphere, it forms an
incredibly thin layer.

5. Reflectivity and Ductility
A further benefit of aluminium is that it is a
good reflector. Because of its capacity to
reflect both light and heat, it is utilised in
rescue blankets and light fittings.

6. Recyclability
Contrary to popular belief, aluminium is
100% recyclable and keeps all of its original
qualities during the recycling process.It is
more cost-effective to employ recycled
metal during production than prime metal
from the ground.

7. Electrical and Thermal
Conductivity
It is a great heat and electrical conductor.
Although aluminium is not as conductive as
copper, it is roughly one-third the weight of
copper, so that an aluminium wire half the
weight of a copper wire.

8. Conclusion
To summarise, aluminium wire rod is a
versatile material that is used in numerous
industries. Its high strength, light weight,
and corrosion resistance make it an ideal
material for a wide range of applications.

9. THANK YOU
Aluminium is a silvery white reactive metal that is typically protected by a tough oxide
covering. Aluminum wire rod is also the most readily accessible and cost-effective bike component
for racing and mountain bike frames.
To know more visit @ www.ganpatiengineering.com/