The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolted in place, completing the assembly.
Caterpillar cat 326 f l excavator (prefix hcj) service repair manual (hcj0000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 345 d l excavator (prefix yee) service repair manual (yee0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group and crankshaft rear seal of a 345D L Excavator with a C13 engine. The removal procedure includes using various tools to remove bolts, seals, gears, bushings, and bearings. The installation procedure provides instructions on cleaning, inspecting, applying threadlock, and installing components while ensuring proper dimensions and alignments are met. Torque specifications and notes are provided throughout.
Caterpillar cat 345 d l excavator (prefix byc) service repair manual (byc0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a 345D L Excavator powered by a C13 engine, including:
1. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, gears, bushings, bearings, and covers.
2. Detailed installation instructions are also provided, including proper tooling, torque specifications, and ensuring correct dimensions and alignments of components.
3. Removal and installation of the flywheel and rear crankshaft seal are also described following similar procedures.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D2 GC excavator. The procedures include:
1. Removing various components of the piston motor such as bearings, seals, and housing pieces.
2. Assembling the piston pump by pressing in retaining rings, installing bearings and seals, and positioning housing pieces and mounting bolts in the correct order.
3. Installing the assembled piston pump by connecting hoses and harness assemblies, and filling the hydraulic system.
Caterpillar cat 345 d l excavator (prefix kfh) service repair manual (kfh0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a C13 engine, including:
1. The procedure for removing the rear gear group involves removing 10 components and using 2 required tools.
2. The installation procedure involves 11 steps and uses 1 required tool, and includes instructions for properly installing and positioning bearings.
3. Separate sections provide procedures for removing and installing the flywheel and crankshaft rear seal. Precautions are mentioned regarding handling heated parts and containing fluids.
Caterpillar cat 323 f excavator (prefix kby) service repair manual (kby00001 ...jfdskekdmme
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing 12 components including gears, adapters, and sleeve bearings. The installation procedure describes installing these components in reverse order and ensuring proper alignment and torque specifications are followed.
Caterpillar Cat 326F L and 326F LN Excavator (Prefix HCJ) Service Repair Manu...yan77xunhao
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The housing is positioned onto an assembly stand using lifting equipment. External components like the head assembly and relief valves are attached last. The assembly ensures proper installation of all sealed, sprung, and rotating components in the correct orientation.
Caterpillar cat 326 f l excavator (prefix hcj) service repair manual (hcj0000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 345 d l excavator (prefix yee) service repair manual (yee0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group and crankshaft rear seal of a 345D L Excavator with a C13 engine. The removal procedure includes using various tools to remove bolts, seals, gears, bushings, and bearings. The installation procedure provides instructions on cleaning, inspecting, applying threadlock, and installing components while ensuring proper dimensions and alignments are met. Torque specifications and notes are provided throughout.
Caterpillar cat 345 d l excavator (prefix byc) service repair manual (byc0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a 345D L Excavator powered by a C13 engine, including:
1. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, gears, bushings, bearings, and covers.
2. Detailed installation instructions are also provided, including proper tooling, torque specifications, and ensuring correct dimensions and alignments of components.
3. Removal and installation of the flywheel and rear crankshaft seal are also described following similar procedures.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D2 GC excavator. The procedures include:
1. Removing various components of the piston motor such as bearings, seals, and housing pieces.
2. Assembling the piston pump by pressing in retaining rings, installing bearings and seals, and positioning housing pieces and mounting bolts in the correct order.
3. Installing the assembled piston pump by connecting hoses and harness assemblies, and filling the hydraulic system.
Caterpillar cat 345 d l excavator (prefix kfh) service repair manual (kfh0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a C13 engine, including:
1. The procedure for removing the rear gear group involves removing 10 components and using 2 required tools.
2. The installation procedure involves 11 steps and uses 1 required tool, and includes instructions for properly installing and positioning bearings.
3. Separate sections provide procedures for removing and installing the flywheel and crankshaft rear seal. Precautions are mentioned regarding handling heated parts and containing fluids.
Caterpillar cat 323 f excavator (prefix kby) service repair manual (kby00001 ...jfdskekdmme
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing 12 components including gears, adapters, and sleeve bearings. The installation procedure describes installing these components in reverse order and ensuring proper alignment and torque specifications are followed.
Caterpillar Cat 326F L and 326F LN Excavator (Prefix HCJ) Service Repair Manu...yan77xunhao
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The housing is positioned onto an assembly stand using lifting equipment. External components like the head assembly and relief valves are attached last. The assembly ensures proper installation of all sealed, sprung, and rotating components in the correct orientation.
Caterpillar cat 326 f ln excavator (prefix hcj) service repair manual (hcj000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f l excavator (prefix hcj) service repair manual (hcj0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting equipment, completing the assembly of the travel motor.
Caterpillar Cat 326F L Excavator (Prefix HCJ) Service Repair Manual (HCJ00001...f8usiejdkmdd
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
Caterpillar cat 326 f ln excavator (prefix hcj) service repair manual (hcj000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The housing is positioned onto an assembly stand using lifting equipment. External components like the head assembly and relief valves are attached last. The assembly ensures proper installation of all sealed, sprung, and rotating components in the correct orientation.
Caterpillar cat 326 f ln excavator (prefix hcj) service repair manual (hcj000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F L Excavator (Prefix HCJ) Service Repair Manual (HCJ00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before securing the head assembly to the housing with bolts. Finally, relief valves and spools are installed to complete the assembly.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...kmf9ioseodk
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates.
2. Install the rotating group and brake piston into the motor housing.
3. Attach the head assembly to the housing to complete the travel motor assembly. Precautions are given to prevent injury during assembly of spring-loaded components.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F, 326F L and 326F LN Excavator (Prefix GGJ) Service Repai...yan77xunhao
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing items like relief valves, spools, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar Cat 326F L Excavator (Prefix GGJ) Service Repair Manual (GGJ00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f excavator (prefix fbr) service repair manual (fbr00001 ...kmf9ioseodk
The document provides assembly instructions for a travel motor in three parts:
1. It describes 27 steps to assemble internal components of the travel motor like seals, springs, pistons, and plates.
2. It explains installing the rotating group, brake piston, and head assembly onto the motor housing using lifting tools due to the heavy weight of components.
3. It concludes with installing remaining parts like relief valves and spool onto the assembled travel motor. Proper assembly following all steps is emphasized to prevent injury from spring-loaded parts.
Caterpillar cat 326 f l excavator (prefix fbr) service repair manual (fbr0000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and components inside the motor housing. Springs, balls and piston assemblies are then installed into the barrel assembly. Keys and pins are placed in the body before installing the bearing and shaft. More components are added to the rotating assembly before inserting it into the housing. Plates and discs are installed, followed by seals on the brake piston. Finally, the head assembly is mounted to complete the travel motor assembly.
Caterpillar cat 345 b series ii excavator (prefix dcw) service repair manual ...fujsekfkksemm
This document provides instructions for removing and installing the cylinder head on a 345B Series II Excavator with a 3176 engine. The removal procedure involves removing components like the valve mechanism cover, rocker shaft, and pushrods. Sensors and tubes must be disconnected from the cylinder head before removing bolts and lifting the head off. For installation, the mating surfaces are cleaned and the correct gasket is installed before lowering the head onto the cylinder block and installing bolts.
Caterpillar cat 345 b series ii excavator (prefix ald) service repair manual ...fujsekfkksemm
This document provides instructions for installing a cylinder head on a 3176C engine. It involves cleaning surfaces, installing gaskets and seals, lifting the cylinder head into place using guide bolts, and tightening head bolts in a specific sequence to the correct torque specifications. Sensors and wiring are then reconnected, coolant is added to the system, and remaining components like the rocker shaft and pushrods are reinstalled to complete the job.
More Related Content
Similar to Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 and up)
Caterpillar cat 326 f ln excavator (prefix hcj) service repair manual (hcj000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f l excavator (prefix hcj) service repair manual (hcj0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting equipment, completing the assembly of the travel motor.
Caterpillar Cat 326F L Excavator (Prefix HCJ) Service Repair Manual (HCJ00001...f8usiejdkmdd
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
Caterpillar cat 326 f ln excavator (prefix hcj) service repair manual (hcj000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The housing is positioned onto an assembly stand using lifting equipment. External components like the head assembly and relief valves are attached last. The assembly ensures proper installation of all sealed, sprung, and rotating components in the correct orientation.
Caterpillar cat 326 f ln excavator (prefix hcj) service repair manual (hcj000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F L Excavator (Prefix HCJ) Service Repair Manual (HCJ00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before securing the head assembly to the housing with bolts. Finally, relief valves and spools are installed to complete the assembly.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...kmf9ioseodk
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates.
2. Install the rotating group and brake piston into the motor housing.
3. Attach the head assembly to the housing to complete the travel motor assembly. Precautions are given to prevent injury during assembly of spring-loaded components.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F, 326F L and 326F LN Excavator (Prefix GGJ) Service Repai...yan77xunhao
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing items like relief valves, spools, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar Cat 326F L Excavator (Prefix GGJ) Service Repair Manual (GGJ00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f excavator (prefix fbr) service repair manual (fbr00001 ...kmf9ioseodk
The document provides assembly instructions for a travel motor in three parts:
1. It describes 27 steps to assemble internal components of the travel motor like seals, springs, pistons, and plates.
2. It explains installing the rotating group, brake piston, and head assembly onto the motor housing using lifting tools due to the heavy weight of components.
3. It concludes with installing remaining parts like relief valves and spool onto the assembled travel motor. Proper assembly following all steps is emphasized to prevent injury from spring-loaded parts.
Caterpillar cat 326 f l excavator (prefix fbr) service repair manual (fbr0000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and components inside the motor housing. Springs, balls and piston assemblies are then installed into the barrel assembly. Keys and pins are placed in the body before installing the bearing and shaft. More components are added to the rotating assembly before inserting it into the housing. Plates and discs are installed, followed by seals on the brake piston. Finally, the head assembly is mounted to complete the travel motor assembly.
Similar to Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 and up) (20)
Caterpillar cat 345 b series ii excavator (prefix dcw) service repair manual ...fujsekfkksemm
This document provides instructions for removing and installing the cylinder head on a 345B Series II Excavator with a 3176 engine. The removal procedure involves removing components like the valve mechanism cover, rocker shaft, and pushrods. Sensors and tubes must be disconnected from the cylinder head before removing bolts and lifting the head off. For installation, the mating surfaces are cleaned and the correct gasket is installed before lowering the head onto the cylinder block and installing bolts.
Caterpillar cat 345 b series ii excavator (prefix ald) service repair manual ...fujsekfkksemm
This document provides instructions for installing a cylinder head on a 3176C engine. It involves cleaning surfaces, installing gaskets and seals, lifting the cylinder head into place using guide bolts, and tightening head bolts in a specific sequence to the correct torque specifications. Sensors and wiring are then reconnected, coolant is added to the system, and remaining components like the rocker shaft and pushrods are reinstalled to complete the job.
Caterpillar cat 345 b series ii excavator (prefix ccc) service repair manual ...fujsekfkksemm
This document provides instructions for removing and installing the cylinder head on a 345B Series II Excavator with a 3176C engine. The removal procedure involves removing various components like sensors, tubes, and manifolds. The cylinder head bolts are then removed and the head lifted off using a suitable lifting device. For installation, the mating surfaces are cleaned and new gaskets installed before positioning the cylinder head on the block and installing the bolts.
Caterpillar cat 345 c excavator (prefix dhp) service repair manual (dhp00001 ...fujsekfkksemm
The document provides instructions for disassembling and assembling the travel motor of a 345C excavator. It lists 31 steps to disassemble the travel motor by removing components like the head, plates, seals, pins, and piston assemblies. It notes to mark parts for reinstallation and clean components to prevent contamination. Reassembly follows the reverse order of disassembly.
Caterpillar cat 345 c excavator (prefix spc) service repair manual (spc00001 ...fujsekfkksemm
The document provides instructions for disassembling and assembling the travel motor of a 345C L EXCAVATOR. It lists 31 steps to disassemble the various components of the travel motor using different tools. These components include the head, plates, seals, pins, brake piston, disks, rotating group, shaft assembly, barrels, seals, and more. It notes to mark parts for reinstallation and clean components thoroughly. The assembly procedure is listed but not described in detail.
Caterpillar cat 345 c excavator (prefix wde) service repair manual (wde00001 ...fujsekfkksemm
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing 30 parts from the final drive assembly using various tools. The assembly procedure is the reverse of the disassembly process and includes applying thread lock compound and gasket sealant to specific joints.
Caterpillar cat 345 c hydraulic excavator (prefix tdg) service repair manual ...fujsekfkksemm
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing pieces. It then lists 13 steps for assembly, reinstalling these components in reverse order and noting to clean all parts, apply lubricant, and replace all seals and gaskets. Precise measurements and tooling are required to properly assemble the travel motor.
Caterpillar cat 345 c l excavator (prefix scn) service repair manual (scn0000...fujsekfkksemm
This document provides step-by-step instructions for disassembling and assembling the final drive of a 345C L excavator. It details removing over 30 individual components in 28 steps, including the final drive cover, carrier assemblies, ring gear, and sprocket housing. Reassembly follows the reverse order, with notes to reinstall parts in their original positions and orientations. Required tools include transmission stands, eyebolts, retaining ring pliers, and seal installers.
Caterpillar cat 345 c l excavator (prefix s5m) service repair manual (s5m0000...fujsekfkksemm
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345C L Excavator. The disassembly process involves removing over 20 individual parts from the final drive housing including gears, shafts, bearings, seals and other components. Proper identification of part locations and orientations is emphasized for reassembly. Required tools include lifting devices, retaining ring pliers, eyebolts and other specialized tools.
Caterpillar cat 345 c l excavator (prefix spc) service repair manual (spc0000...fujsekfkksemm
The document provides instructions for disassembling and assembling the travel motor of a 345C L EXCAVATOR. It lists 31 steps to disassemble the various components of the travel motor including removing the head, brake piston, disks, rotating group, piston assemblies, seals and more. Detailed illustrations are provided to identify each part. When assembling, the instructions note to clean all parts and reinstall components in their original locations and orientations. Precautions are outlined to contain fluids, avoid damage, and prevent contamination.
Caterpillar cat 345 c l excavator (prefix wde) service repair manual (wde0000...fujsekfkksemm
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing 30 parts from the final drive assembly using various tools. The assembly procedure is the reverse of the disassembly steps and includes applying thread lock compound and gasket sealant to specific joints.
Caterpillar cat 345 b l excavator (prefix 9cw) service repair manual (9cw0000...fujsekfkksemm
This document provides instructions for removing and installing the rocker shaft, pushrods, and cylinder head on a Caterpillar 345B L excavator engine. The removal procedure involves removing covers, shafts, rods, sensors and manifolds. The cylinder head is then lifted off. The installation procedure specifies cleaning components, installing gaskets and seals, and torquing bolts to specifications when reassembling the cylinder head and related parts.
Caterpillar cat 345 b l excavator (prefix 8rw) service repair manual (8rw0000...fujsekfkksemm
This document provides instructions for installing a cylinder head on a 345B L EXCAVATOR engine. It describes cleaning and inspecting the cylinder head and block mating surfaces. The correct cylinder head gasket must be installed, along with new O-rings. The cylinder head is placed on guide bolts and bolts are tightened in a specific sequence to the correct torques. Sensors and lines are then reconnected to the cylinder head before installing the water outlet manifold.
Caterpillar cat 345 b excavator (prefix ayr) service repair manual (ayr00001 ...fujsekfkksemm
This document provides instructions for disassembling and assembling the final drive components of an excavator model 345B. It describes removing 27 components including the travel motor, final drive, carrier assemblies, ring gear, and sprocket housing. Detailed illustrations and notes are provided to aid in correctly identifying parts and maintaining proper orientation during reassembly. Required tools include various link brackets, retaining ring pliers, seal installer, anti-seize compound, grease, thread lock, gasket sealant and a transmission stand.
Caterpillar cat 345 b excavator (prefix amn) service repair manual (amn00001 ...fujsekfkksemm
The document provides instructions for disassembling and assembling the travel motor of an excavator model 345B. It lists 31 steps to disassemble the travel motor by removing components like the head, plates, seals, pistons, bearings and housing. It also lists tools required for the job and safety notices about keeping parts clean and containing fluids.
Caterpillar cat 345 b excavator (prefix amj) service repair manual (amj00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. It describes preparing the travel motor components and inserting keys, seals, pistons, plates and spacers into the motor body.
2. It explains assembling the barrel, installing the shaft and bearings, and inserting friction disks and separator plates.
3. It outlines attaching the head, installing valves, plugs and seals to complete the assembly. Precise measurements and torque specifications are listed to ensure correct assembly.
Caterpillar cat 345 b excavator (prefix amd) service repair manual (amd00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1) It describes preparing the travel motor body by installing seals, pistons, and spacers.
2) It explains assembling the barrel, installing the shaft and bearings, and inserting friction disks and plates.
3) It outlines attaching the head, installing valves and plugs, and filling the travel motor with oil before operation.
Caterpillar cat 345 b excavator (prefix 8kw) service repair manual (8kw00001 ...fujsekfkksemm
This document provides instructions for removing and installing the rocker shaft, pushrods, cylinder head, and related components on a 345B Excavator engine. The removal process involves removing covers, shafts, rods, sensors, tubes, and manifolds before lifting the cylinder head off. The installation process specifies cleaning, inspecting, and lubricating components before lowering the cylinder head back onto the engine and reinstalling related parts in reverse order of removal. Tools and torque specifications are listed for select steps.
Caterpillar cat 345 b excavator (prefix 6mw) service repair manual (6mw00001 ...fujsekfkksemm
The document provides instructions for disassembling and assembling the travel motor of a 345B Excavator. It lists 32 steps for disassembly, including removing covers, springs, seals, gears, and housing components. It then lists 15 steps for assembly, reversing the disassembly process and including inspecting parts and ensuring cleanliness to prevent contamination. The overall document provides detailed technical instructions for servicing the excavator's travel motor.
Caterpillar cat 340 f excavator (prefix sgh) service repair manual (sgh00001 ...fujsekfkksemm
The document provides disassembly instructions for a swing drive on a 340F excavator model. It begins by having the technician remove the swing drive and mark parts for reassembly. Several internal components of the swing drive are then removed, including planetary gears, shafts, rings, and housings. Precision tools are required and technicians should be careful due to the weights of parts removed. Cleanliness is emphasized to prevent contamination of hydraulic systems during repair.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326F EXCAVATOR HCA
Configuration: 326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i05435999
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install
lip seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g03431399
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g03431402
19. The notches in cam plate (20) must align with keys (26). The keys (26) are located in the
bottom of the housing of the travel motor.
Illustration 17 g00887355
7/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
8/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 177 ± 18 N·m (131 ± 13 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 9 00:56:23 UTC+0800 2020
10/10
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326F EXCAVATOR HCA
Configuration: 326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i07505850
Travel Motor - Assemble
SMCS - 4351-016
S/N - B321-UP
S/N - EBK1-UP
S/N - ERL1-UP
S/N - FBR1-UP
S/N - GGJ1-UP
S/N - GHT1-UP
S/N - HBT1-UP
S/N - HCA1-UP
S/N - HCJ1-UP
S/N - HCK1-UP
S/N - JFR1-UP
S/N - JHF1-UP
S/N - KFA1-UP
S/N - LBN1-UP
S/N - LCG1-UP
S/N - MBX1-UP
1/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. S/N - RCN1-UP
S/N - TMR1-UP
S/N - TPG1-UP
S/N - WBA1-UP
S/N - WGL1-UP
S/N - XFK1-UP
S/N - YHA1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1P-2420 Transmission Repair Stand 1
FT-0957 Positioning Gp 4
B
- M16x2 Threaded Rod 3
8T-1757 Nut 6
9X-8268 Washer 6
C 421-5662 Lifting Eye Assembly 1
D 421-5663 Lifting Eye Assembly 2
Illustration 1 g06343795
1. Install lip seal (45) and bearing (44).
2. Install balls (46).
2/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 5 g06343783
6. Install springs (39) and hold down ball (38) into barrel (37).
Illustration 6 g06343777
7. Install retainer (36) and piston (35) into barrel (37).
Illustration 7 g06343638
8. Install rotating group (34) into housing (26).
4/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g06343469
Illustration 9 g06343466
9. Install plates (33) and friction discs (32) in the orientation determined in the disassembly.
Illustration 10 g06343464
10. Install O-ring seal (31) into brake piston guide (30).
5/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 11 g06343462
11. Install brake piston guide (30).
Illustration 12 g06343437
12. Install O-ring seals (29) and back up rings (28) into brake piston (27).
Illustration 13 g06343877
13. Use Tooling (D) and a suitable lifting device to position housing (26) onto Tooling (A) and
(B). The weight of housing (26) is approximately 43 kg (95 lb).
14. Remove Tooling (D) and install brake piston (27).
6/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 14 g06343381
15. Install O-ring seals (25) and (24).
16. Install springs (23) and pins (22).
Illustration 15 g06343374
17. Install bearing (21) and control plate (20) into head assembly (18).
Illustration 16 g06343366
18. Use Tooling (C) and a suitable lifting device to install head assembly (18) onto the housing.
The weight of head assembly (18) is approximately 21 kg (47 lb).
7/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 17 g06343887
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
19. Install bolts (19). Tighten bolts (19) to a torque of 205 ± 10 N·m (151 ± 7 lb ft).
20. Install the bolts of Tooling (B)
Illustration 18 g06343315
8/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 19 g06343314
21. Install O-ring seal (17) onto relief valve (16).
22. Install relief valve (16) into the head assembly. Tighten relief valve (16) to a torque of
570 ± 20 N·m (420 ± 14 lb ft). Repeat for the opposite side.
Illustration 20 g06342009
23. Install spool (15).
Illustration 21 g06342005
9/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
24. Install O-ring seal (12) onto plug (11).
25. Install ball (14), spring (13), and plug (11) into cap (6). Repeat for the opposite side.
Illustration 22 g06342000
Illustration 23 g06341942
Improper assembly of parts that are spring loaded can cause bodily
injury.
10/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
26. Install O-ring seal (10) onto cap (6).
27. Install washer (7), spring (8), guide (9), and cap (6) into the head assembly.
28. Repeat for the opposite side.
Illustration 24 g06341917
29. Install spool (4).
Illustration 25 g06341915
30. Install spring (3).
11/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 26 g06341912
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
31. Install plug (2A). Tighten plug (2A) to a torque of 54 ± 5 N·m (40 ± 4 lb ft). Repeat for the
opposite side.
Illustration 27 g06344110
32. Install plug (2) and the O-ring seal. Tighten plug (2) to a torque of 53 ± 2 N·m (39 ± 1 lb ft).
12/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 28 g06341880
33. Install plugs (1) and the O-ring seals.
34. Remove the travel motor from Tooling (A) and (B). The weight of the travel motor is
approximately 70 kg (154 lb).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 9 00:57:18 UTC+0800 2020
13/13
326F L & 326F LN Excavators HCA00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...