The document provides assembly instructions for a travel motor in 27 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto the brake piston before installing it. Additional seals and springs are fitted before installing the head assembly. Bolts are tightened to the specified torques to complete the assembly. The travel motor is then ready for installation.
Caterpillar cat 326 f ln excavator (prefix hca) service repair manual (hca000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 ...kmf9ioseodk
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Install the rotating group and brake assembly into the motor housing.
3. Attach the motor head assembly to the housing and install remaining components like seals and springs.
The instructions include 28 steps and require various tools to correctly assemble the travel motor.
Caterpillar cat 326 f ln excavator (prefix hca) service repair manual (hca000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F, 326F L and 326F LN Excavator (Prefix HCA) Service Repai...yan77xunhao
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f l excavator (prefix hca) service repair manual (hca0000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates in the proper order and orientation.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly using lifting tools due to the heavy weight of parts.
3. Tighten bolts and install remaining parts like relief valves and spools to complete the assembly.
Caterpillar cat 326 f ln excavator (prefix hca) service repair manual (hca000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolts are tightened to specified torques to complete the assembly.
Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 ...fjsekdmmeed
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating assembly and brake components are assembled separately and placed into the housing. Finally, the head assembly is attached to the housing and relief valves and spools are installed to complete the travel motor assembly.
Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolted in place, completing the assembly.
Caterpillar cat 326 f ln excavator (prefix hca) service repair manual (hca000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 ...kmf9ioseodk
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Install the rotating group and brake assembly into the motor housing.
3. Attach the motor head assembly to the housing and install remaining components like seals and springs.
The instructions include 28 steps and require various tools to correctly assemble the travel motor.
Caterpillar cat 326 f ln excavator (prefix hca) service repair manual (hca000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F, 326F L and 326F LN Excavator (Prefix HCA) Service Repai...yan77xunhao
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f l excavator (prefix hca) service repair manual (hca0000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates in the proper order and orientation.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly using lifting tools due to the heavy weight of parts.
3. Tighten bolts and install remaining parts like relief valves and spools to complete the assembly.
Caterpillar cat 326 f ln excavator (prefix hca) service repair manual (hca000...fjsekdmmeed
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolts are tightened to specified torques to complete the assembly.
Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 ...fjsekdmmeed
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating assembly and brake components are assembled separately and placed into the housing. Finally, the head assembly is attached to the housing and relief valves and spools are installed to complete the travel motor assembly.
Caterpillar cat 326 f excavator (prefix hca) service repair manual (hca00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolted in place, completing the assembly.
Caterpillar Cat 326F L Excavator (Prefix HCA) Service Repair Manual (HCA00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating assembly and brake components are assembled separately and placed into the housing. Finally, the head assembly is attached to the housing and relief valves and spools are installed to complete the travel motor assembly.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates in the proper order and orientation.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly using lifting tools due to the heavy weight of parts.
3. Complete the assembly by installing items like relief valves, spools, and tightening bolts to the specified torques.
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolts are tightened to specified torques to complete the assembly.
Caterpillar cat 326 f l excavator (prefix hca) service repair manual (hca0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...kmf9ioseodk
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates.
2. Install the rotating group and brake piston into the motor housing.
3. Attach the head assembly to the housing to complete the travel motor assembly. Precautions are given to prevent injury during assembly of spring-loaded components.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F, 326F L and 326F LN Excavator (Prefix GGJ) Service Repai...yan77xunhao
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing items like relief valves, spools, and tightening bolts to the specified torques.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar Cat 326F L Excavator (Prefix GGJ) Service Repair Manual (GGJ00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f excavator (prefix fbr) service repair manual (fbr00001 ...kmf9ioseodk
The document provides assembly instructions for a travel motor in three parts:
1. It describes 27 steps to assemble internal components of the travel motor like seals, springs, pistons, and plates.
2. It explains installing the rotating group, brake piston, and head assembly onto the motor housing using lifting tools due to the heavy weight of components.
3. It concludes with installing remaining parts like relief valves and spool onto the assembled travel motor. Proper assembly following all steps is emphasized to prevent injury from spring-loaded parts.
Caterpillar cat 326 f l excavator (prefix fbr) service repair manual (fbr0000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and components inside the motor housing. Springs, balls and piston assemblies are then installed into the barrel assembly. Keys and pins are placed in the body before installing the bearing and shaft. More components are added to the rotating assembly before inserting it into the housing. Plates and discs are installed, followed by seals on the brake piston. Finally, the head assembly is mounted to complete the travel motor assembly.
Caterpillar cat 326 f excavator (prefix fbr) service repair manual (fbr00001 ...fjsekdmmeed
The document provides assembly instructions for a travel motor in 28 steps. It includes illustrations and lists required tools. Key steps include installing seals and bearings, assembling piston and swashplate components, installing plates and discs, and fitting the head assembly using lifting tools due to component weights of 21-43 kg. The travel motor is then ready for installation on the excavator.
Caterpillar Cat 390F L Excavator (Prefix FEH) Service Repair Manual (FEH00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the travel motor on a 390F excavator model. It involves 40 steps to disassemble the various components of the travel motor including removing seals, springs, plates, pistons, and bearings. The assembly section outlines 31 steps to reinstall these components in reverse order while ensuring proper cleaning and alignment of parts. Precision tools are required and safety precautions mentioned to avoid injury from spring forces.
Caterpillar Cat 374D L Excavator (Prefix PJA) Service Repair Manual (PJA00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 374D L Excavator. It describes 34 steps to disassemble the final drive by removing components like the ring gear, carrier assemblies, gears, shafts and seals. It then describes 8 steps for assembling the final drive, which involves cleaning parts, pressing in bearings and pins, installing housings and determining the correct shim number based on bearing preload measurements. The document contains detailed illustrations and lists required tools for each step.
Este documento contiene instrucciones para operar y mantener una máquina. Explica los números de la máquina, las señales de seguridad, cómo subirse y bajarse de la máquina, cómo operar la estación del operador, cómo conducir y operar la máquina, cómo transportarla, el mantenimiento requerido y las especificaciones técnicas.
More Related Content
Similar to Caterpillar Cat 326F L Excavator (Prefix HCJ) Service Repair Manual (HCJ00001 and up).pdf
Caterpillar Cat 326F L Excavator (Prefix HCA) Service Repair Manual (HCA00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating assembly and brake components are assembled separately and placed into the housing. Finally, the head assembly is attached to the housing and relief valves and spools are installed to complete the travel motor assembly.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates in the proper order and orientation.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly using lifting tools due to the heavy weight of parts.
3. Complete the assembly by installing items like relief valves, spools, and tightening bolts to the specified torques.
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and bearings into the motor housing. Pistons, springs, and other internal components are then installed. The rotating group is placed into the housing along with plates and discs. Seals are fitted onto brake components before installing them. Finally, the head assembly is attached to the housing and bolts are tightened to specified torques to complete the assembly.
Caterpillar cat 326 f l excavator (prefix hca) service repair manual (hca0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...kmf9ioseodk
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, bearings, springs, and plates.
2. Install the rotating group and brake piston into the motor housing.
3. Attach the head assembly to the housing to complete the travel motor assembly. Precautions are given to prevent injury during assembly of spring-loaded components.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fujsekfkksemm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the motor housing onto an assembly stand and install additional components like the brake piston.
3. Attach the head assembly onto the housing using lifting tools, completing the travel motor assembly.
Caterpillar Cat 326F, 326F L and 326F LN Excavator (Prefix GGJ) Service Repai...yan77xunhao
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the housing and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing items like relief valves, spools, and tightening bolts to the specified torques.
Caterpillar cat 326 f excavator (prefix ggj) service repair manual (ggj00001 ...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f l excavator (prefix ggj) service repair manual (ggj0000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar Cat 326F L Excavator (Prefix GGJ) Service Repair Manual (GGJ00001...dujdkksdmm
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
The document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, pistons, springs, and plates in the correct order and orientation.
2. Position the travel motor housing onto an assembly stand and install additional components like the rotating group and brake piston.
3. Attach the head assembly onto the housing using lifting equipment due to the heavy weight of parts.
Caterpillar cat 326 f ln excavator (prefix ggj) service repair manual (ggj000...fjsekdmmeed
This document provides assembly instructions for a travel motor in 3 steps:
1. Install various internal components of the travel motor like seals, springs, pistons, and plates.
2. Position the motor housing onto an assembly stand and install additional components like the rotating group, brake piston, and head assembly.
3. Complete the assembly by installing the relief valves, spool, and tightening bolts to the specified torques.
Caterpillar cat 326 f excavator (prefix fbr) service repair manual (fbr00001 ...kmf9ioseodk
The document provides assembly instructions for a travel motor in three parts:
1. It describes 27 steps to assemble internal components of the travel motor like seals, springs, pistons, and plates.
2. It explains installing the rotating group, brake piston, and head assembly onto the motor housing using lifting tools due to the heavy weight of components.
3. It concludes with installing remaining parts like relief valves and spool onto the assembled travel motor. Proper assembly following all steps is emphasized to prevent injury from spring-loaded parts.
Caterpillar cat 326 f l excavator (prefix fbr) service repair manual (fbr0000...kmf9ioseodk
The document provides assembly instructions for a travel motor in 28 steps. It begins by installing seals and components inside the motor housing. Springs, balls and piston assemblies are then installed into the barrel assembly. Keys and pins are placed in the body before installing the bearing and shaft. More components are added to the rotating assembly before inserting it into the housing. Plates and discs are installed, followed by seals on the brake piston. Finally, the head assembly is mounted to complete the travel motor assembly.
Caterpillar cat 326 f excavator (prefix fbr) service repair manual (fbr00001 ...fjsekdmmeed
The document provides assembly instructions for a travel motor in 28 steps. It includes illustrations and lists required tools. Key steps include installing seals and bearings, assembling piston and swashplate components, installing plates and discs, and fitting the head assembly using lifting tools due to component weights of 21-43 kg. The travel motor is then ready for installation on the excavator.
Similar to Caterpillar Cat 326F L Excavator (Prefix HCJ) Service Repair Manual (HCJ00001 and up).pdf (18)
Caterpillar Cat 390F L Excavator (Prefix FEH) Service Repair Manual (FEH00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the travel motor on a 390F excavator model. It involves 40 steps to disassemble the various components of the travel motor including removing seals, springs, plates, pistons, and bearings. The assembly section outlines 31 steps to reinstall these components in reverse order while ensuring proper cleaning and alignment of parts. Precision tools are required and safety precautions mentioned to avoid injury from spring forces.
Caterpillar Cat 374D L Excavator (Prefix PJA) Service Repair Manual (PJA00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 374D L Excavator. It describes 34 steps to disassemble the final drive by removing components like the ring gear, carrier assemblies, gears, shafts and seals. It then describes 8 steps for assembling the final drive, which involves cleaning parts, pressing in bearings and pins, installing housings and determining the correct shim number based on bearing preload measurements. The document contains detailed illustrations and lists required tools for each step.
Este documento contiene instrucciones para operar y mantener una máquina. Explica los números de la máquina, las señales de seguridad, cómo subirse y bajarse de la máquina, cómo operar la estación del operador, cómo conducir y operar la máquina, cómo transportarla, el mantenimiento requerido y las especificaciones técnicas.
Caterpillar Cat 374F L Excavator (Prefix DNM) Service Repair Manual (DNM00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive on a 374F L Excavator. It lists the required tools and presents a step-by-step process to remove and install over 35 individual parts. Key steps include removing the ring gear, carrier assemblies, gears and shafts, and separating the main housing from the motor housing. Proper cleaning and application of sealant is emphasized throughout reassembly.
The document provides instructions for disassembling and assembling the travel motor of a 345C L EXCAVATOR. It lists 31 steps to disassemble the various components of the travel motor using different tools. These components include the head, plates, seals, pins, brake piston, disks, rotating group, shaft assembly, barrels, seals, and more. It emphasizes cleaning parts and marking components to ensure proper reassembly.
Caterpillar Cat 345C L Hydraulic Excavator (Prefix GPH) Service Repair Manual...f8usiejdkmdd
This document provides instructions for disassembling and assembling the travel motor of a 345C L Hydraulic Excavator. The disassembly procedure involves 31 steps to remove components like the head, plates, disks, rotating group, seals and more. The assembly procedure involves 13 steps and notes to clean parts, apply lubricant, set proper measurements and orientations when reinstalling components like the washers, spacers and seals. Special tools are listed for tasks like removing bearings and installing seals.
The document provides instructions for disassembling and assembling the travel motor of an excavator model 345B. It lists 31 steps to disassemble parts like the head, plates, seals, pistons, and housing. It then lists 27 steps to reassemble these parts in reverse order, making sure to clean parts and apply lubricant. Proper installation of seals, washers, and keys is emphasized.
This document provides instructions for disassembling and assembling the swing drive of a 340F Excavator. The disassembly procedure involves removing 27 parts from the swing drive including the cover, sun gear, carrier assembly, planetary gears, ring gear, pinion shaft, and bearings. The assembly procedure instructs installing lip seals and bearings on the cage and pinion shaft before lowering the cage over the pinion shaft and installing the bearing.
This document provides instructions for removing and installing an exhaust manifold and inlet and exhaust valves on a 325-A FM L EXCAVATOR 7LM. It describes:
1) Removing the bolts, exhaust manifold, and gaskets from the cylinder head to remove the exhaust manifold.
2) Installing new gaskets and mounting the exhaust manifold to the cylinder head, applying anti-seize compound and torqueing bolts.
3) Removing inlet and exhaust valves by compressing springs, removing retainers and springs, and removing seals and valves.
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
Caterpillar Cat 385C L Excavator (Prefix T2E) Service Repair Manual (T2E00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. The disassembly process involves removing over 30 individual parts in a specific sequence. The assembly process reverses the disassembly steps and provides additional details on cleaning, lubricating, and setting bearing preloads using shims. Proper tools and lifting devices are required due to the large size and weight of many components. Cleanliness is emphasized throughout to prevent damage to precision parts from contaminants.
This document provides instructions for removing and installing the front gear group of a C18 engine. The removal procedure involves removing 14 bolts, plates, gears and seals. Special care must be taken to mark gear orientations and not turn the crankshaft during removal. The installation procedure details cleaning components, applying thread lock compound, installing 14 gears, plates and seals in the correct order and orientation, and adjusting backlash. Proper removal and installation is important to avoid engine damage.
This document provides instructions for disassembling and assembling the travel motor on a 390F excavator model. It involves over 40 steps to fully disassemble the travel motor by removing components like the head, relief valves, pistons, plates, seals, bearings, and housing. Special tools are required and safety precautions must be followed when removing spring-loaded or heavy parts. The assembly process reverses the disassembly steps and requires cleaning and lubricating parts before reinstallation.
Caterpillar Cat 385C L Excavator (Prefix EDA) Service Repair Manual (EDA00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. It lists the required tools and parts. The disassembly process involves removing over 30 components from the final drive housing in a specific sequence, including carrier assemblies, sun gears, planetary gear sets, and seals. The assembly process reverses the disassembly steps and provides notes on cleaning, inspecting, lubricating, and installing replacement parts as needed.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326F LN EXCAVATOR HCJ
Configuration: 326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i05435999
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install
lip seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g03431399
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g03431402
19. The notches in cam plate (20) must align with keys (26). The keys (26) are located in the
bottom of the housing of the travel motor.
Illustration 17 g00887355
7/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
8/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 177 ± 18 N·m (131 ± 13 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Oct 25 15:03:32 UTC+0800 2020
10/10
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326F LN EXCAVATOR HCJ
Configuration: 326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i07505850
Travel Motor - Assemble
SMCS - 4351-016
S/N - B321-UP
S/N - EBK1-UP
S/N - ERL1-UP
S/N - FBR1-UP
S/N - GGJ1-UP
S/N - GHT1-UP
S/N - HBT1-UP
S/N - HCA1-UP
S/N - HCJ1-UP
S/N - HCK1-UP
S/N - JFR1-UP
S/N - JHF1-UP
S/N - KFA1-UP
S/N - LBN1-UP
S/N - LCG1-UP
S/N - MBX1-UP
1/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. S/N - RCN1-UP
S/N - TMR1-UP
S/N - TPG1-UP
S/N - WBA1-UP
S/N - WGL1-UP
S/N - XFK1-UP
S/N - YHA1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1P-2420 Transmission Repair Stand 1
FT-0957 Positioning Gp 4
B
- M16x2 Threaded Rod 3
8T-1757 Nut 6
9X-8268 Washer 6
C 421-5662 Lifting Eye Assembly 1
D 421-5663 Lifting Eye Assembly 2
Illustration 1 g06343795
1. Install lip seal (45) and bearing (44).
2. Install balls (46).
2/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 5 g06343783
6. Install springs (39) and hold down ball (38) into barrel (37).
Illustration 6 g06343777
7. Install retainer (36) and piston (35) into barrel (37).
Illustration 7 g06343638
8. Install rotating group (34) into housing (26).
4/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g06343469
Illustration 9 g06343466
9. Install plates (33) and friction discs (32) in the orientation determined in the disassembly.
Illustration 10 g06343464
10. Install O-ring seal (31) into brake piston guide (30).
5/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 11 g06343462
11. Install brake piston guide (30).
Illustration 12 g06343437
12. Install O-ring seals (29) and back up rings (28) into brake piston (27).
Illustration 13 g06343877
13. Use Tooling (D) and a suitable lifting device to position housing (26) onto Tooling (A) and
(B). The weight of housing (26) is approximately 43 kg (95 lb).
14. Remove Tooling (D) and install brake piston (27).
6/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 14 g06343381
15. Install O-ring seals (25) and (24).
16. Install springs (23) and pins (22).
Illustration 15 g06343374
17. Install bearing (21) and control plate (20) into head assembly (18).
Illustration 16 g06343366
18. Use Tooling (C) and a suitable lifting device to install head assembly (18) onto the housing.
The weight of head assembly (18) is approximately 21 kg (47 lb).
7/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 17 g06343887
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
19. Install bolts (19). Tighten bolts (19) to a torque of 205 ± 10 N·m (151 ± 7 lb ft).
20. Install the bolts of Tooling (B)
Illustration 18 g06343315
8/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 19 g06343314
21. Install O-ring seal (17) onto relief valve (16).
22. Install relief valve (16) into the head assembly. Tighten relief valve (16) to a torque of
570 ± 20 N·m (420 ± 14 lb ft). Repeat for the opposite side.
Illustration 20 g06342009
23. Install spool (15).
Illustration 21 g06342005
9/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
24. Install O-ring seal (12) onto plug (11).
25. Install ball (14), spring (13), and plug (11) into cap (6). Repeat for the opposite side.
Illustration 22 g06342000
Illustration 23 g06341942
Improper assembly of parts that are spring loaded can cause bodily
injury.
10/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
26. Install O-ring seal (10) onto cap (6).
27. Install washer (7), spring (8), guide (9), and cap (6) into the head assembly.
28. Repeat for the opposite side.
Illustration 24 g06341917
29. Install spool (4).
Illustration 25 g06341915
30. Install spring (3).
11/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 26 g06341912
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
31. Install plug (2A). Tighten plug (2A) to a torque of 54 ± 5 N·m (40 ± 4 lb ft). Repeat for the
opposite side.
Illustration 27 g06344110
32. Install plug (2) and the O-ring seal. Tighten plug (2) to a torque of 53 ± 2 N·m (39 ± 1 lb ft).
12/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 28 g06341880
33. Install plugs (1) and the O-ring seals.
34. Remove the travel motor from Tooling (A) and (B). The weight of the travel motor is
approximately 70 kg (154 lb).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Oct 25 15:04:28 UTC+0800 2020
13/13
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 ...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 326F LN EXCAVATOR HCJ
Configuration: 326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i05435924
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/3
326F L & 326F LN Excavators HCJ00001-UP (MACHINE) POWERED BY C7.1 En...
2020/10/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...