The best paper airplane with its cool design.

1. Easy to fold, this dart has forward swept winglets (canards) which give you extra
control of its flying characteristics.
extremepaperairplanes.com
For more extreme and cool videos of paper airplanes
follow us on this link.

2. INSTRUCTIONS
Start with a square sheet.
1. Fold the paper exactly in half. Unfold the paper after the crease has been
made.
2. Rotate the paper so the crease just made is vertical.
4. Flip the paper over. Fold the upper left and right points down so the points
hit the horizontal center line crease at the edge of the paper. When folded
correctly, the top edge of the paper will line up with the horizontal center line
crease. Unfold after the crease has been made.
5. Flip the paper over and rotate it around so the horizontal creases are
towards the top.
6. Fold the upper right corner down so the point created on the paper's right
edge by the top horizontal crease hits the center line crease. The point
created by the center line crease on the paper's top edge should hit the left
half of the top horizontal crease.
7. Unfold the flap just made. Fold the flap just made.
8. Fold the upper left corner down so the point created on the paper's left
edge by the top horizontal crease hits the center line crease. The point
created by the center line crease on the paper's top edge should hit the right
half of the top horizontal crease.
9. Unfold the flap just made. Fold the upper left corner so the point created
by the paper's left edge by the top horizontal crease hits the center line
crease. The point created by the top center line crease on the paper's top
edge should hit the right half of the top horizontal crease.
10. Unfold the flap just made. Pop the upper left and right horizontal creases
up while bringing the upper left and right flaps in. When folded correctly, a
new flap is created which extends straight up from the paper's base. The new
flap should look like this.
extremepaperairplanes.com
For more extreme and cool videos of paper airplanes
follow us on this link.

3. 11. Rotate the nose around so the nose is pointed up and slightly to the right.
12. Fold the two layers along the diagonal of the small central square on the
right. When folded correctly, the lower left point should hit the upper right
point. Unfold after the crease has been made.
13. Pop the small layer of the right square up and forward. A new crease is
created along the top edge of the square. Continue to press forward and
flatten out the new flap creating the small forward winglet.
14. Make a crease to fold down the tip of the nose. When folded correctly,
the point at the tip of the nose should hit the point created in the center of
the paper where the two winglet flaps come together.
15. Flip the paper over so the flaps and the winglets just created are
underneath. Rotate the paper so the nose and the winglets are pointing to
the left.
16. Open up the wing flaps and adjust the wing angles so they are even. Set
the dihedral angle flat or slightly up. The winglets in front can be adjusted to
make the plane loop. Fold the paper exactly in half along the existing center
line crease. Be sure to line up the wing flaps for good balance.
extremepaperairplanes.com
For more extreme and cool videos of paper airplanes
follow us on this link.

4. 17. Flip the plane over so the nose points to the left and the wing flaps point
down.
18. Make a crease to form the first wing flap. The left point of the crease
should be about one finger width from the bottom edge of the fuselage and
the right point should be about three fingers width from the bottom edge of
the fuselage.
19. Flip the plane over so the first wing flap is underneath.
20. Make a crease for the second wing flap. Be sure to line up the wing flaps for
good balance and flying.
21. Open up the wing flaps and adjust the wing angles so they are even. Set
the dihedral angle flat or slightly up. The winglets in front can be adjusted to
make the plane loop.
extremepaperairplanes.com
For more extreme and cool videos of paper airplanes
follow us on this link.