Over time dirt and dust gets deposited in the radiator and reduces its effectiveness. So, you must be aware of the correct time to flush the radiator and start the process by draining the coolant. Then, add a cleaner to properly clean the inside surface of the radiator. To know all the steps involved in the process, see this slideshow on how to flush the radiator of a car.

1. How to Flush
the Radiator of
the Car

2. Components moving
and rubbing
together in a car and
generate heat.

3. Coolant gets rid of the
heat by circulating
through the radiator.

4. Radiator takes the
heat out of the
coolant and blows it
by a fan.

5. Coolant flush on the
radiator removes
the sediments of the
cooling system.

6. Following points
define the way to
flush the radiator of a
car.

7. Time to flush

8. Radiator is
supposed to flush
in every 5 years or
10,000 miles.

9. Radiator flushing
depends on the driving
habits and leads to
30,000 miles.

10. Drain the coolant

11. Old coolant needs
to drain from the
radiator of the car.

12. Cool down the
engine and don’t
drive it before 30
minutes of flushing.

13. Add cleaner

14. Remove old coolant
and add radiator
cleaner to the radiator
reservoir.

15. After cleaner, add
distilled water to a
reservoir for cleaning
sediments.

16. Drain cleaning fluid

17. Drain all the cleaning
fluid and distilled water
from the radiator.

18. Flush the cooling
system with regular
tap water and drain
tap water.

19. Add new coolant

20. Finally, add new
coolant to the
radiator reservoir of
below amount:-
Half gallon of
antifreeze
Half gallon of
distilled water

21. Start the car and let
the coolant run
through the engine
for 15 minutes.

22. Radiator flush
depends on the age,
make and model of
the car.

23. Average amount
of coolant
requires in a car is
about 4 gallons.

24. Visit Us
https://www.euroautomotive.net/