1. 11th April 2016
Emezza Nur Aitaillah Binti Bakri,
No 7, Jalan Flora 3E/1A,
Bandar Rimbayu 42500
Telok Panglima Garang,
Selangor
To Whom It May Concern:
Dear Sir / Madam,
Application for Project Excutive or any related post
I am writing this letter to be part of your team and very keen for any position offered related to
my qualifications.
Allow me to introduce myself briefly;
I am now working with Jurutera Perunding Tekad Maju Sdn Bhd as a Structural Engineer. My
work required me to design and modeled high rise building and housing from sub-structure up to
the superstructure. I involved in both reinforced concrete design and steel structure design. I
hope my knowledge and skills that I currently hold and my degree can somehow benefit your
company.
I was graduated from University Technology Mara (UiTM) Shah Alam majoring in Bachelor of
Civil Engineering (Hons) Extension of Environment, in January 2013.
I have a strong sense of responsibility to finish any tasks given and willing to handle any form of
work if it needs to be done. I enjoy working together as a group through exchanging ideas with
my peers. I am very hardworking and willing to learn new knowledge, a good listener and fast
learner.
Attached herewith is my Curricular Vitae for your information and consideration.I hope it will
suit your company’s requirements and I am really looking forward to work with your company,
as I am really interested to be part of your team members.
I can be contacted via +6010-2686597 and the following e-mail address:
emezzabakri@yahoo.com
Thank you.
Yours faithfully,
EMEZZA
(Emezza Nur Aitaillah Binti Bakri)
2. EMEZZA NUR AITAILLAH BINTI BAKRI
No 7, Jalan Flora 3E/1A,
Bandar Rimbayu 42500
Telok Panglima Garang,
Selangor
Tel (hp): 010-2686597
emezzabakri@yahoo.com
IC no. : 891212-13-5786 Nationality : Malaysian
Date of birth : 12 December 1989 Race : Malay
Place of Birth : Kuching, Sarawak Religion : Islam
Gender : Female Marital Status: Married
To have a dynamic, challenging and creative engineering working environment in which
to learn and grow acquired skills in engineering field. Gain design and site experience
where I can contribute my skills together with my knowledge for the benefit of my
superior, company and society as whole.
YEAR
2010-2013 : Bachelor of Engineering (Hons) Civil
(Major in Environment)
Universiti Teknologi Mara (UiTM)
GPA: 3.49
CGPA: 3.49
2007-2010 : Diploma in Civil Engineering
(Major in Building Services and Maintenance)
Universiti Teknologi Mara (UiTM)
CGPA : 3.74
2009 : Malaysian University English Test (MUET)
Band Achieved: 3
2006 : SijilPelajaran Malaysia (SPM) (Sijil Terbuka)
Sek.Men.Teknik Sejingkat Kuching Sarawak
4 A1, 3 B3, 4 B4
PERSONAL PARTICULAR
CAREER OBJECTIVES
EDUCATIONAL BACKGROUND
3. FEBRUARY 2013-CURRENT
Company :Jurutera Perunding Tekad Maju Sdn Bhd, Puchong, Selangor
Designation :Structural Design Engineer
1. Project : Dwiputra Phase 3, Putrajaya
Consists of an apartment tower on top of 5 stories podium carpark
includes the Lower Ground which is the water tank level.
Client : Setia Putrajaya Development Sdn Bhd
Task & Responsibility:
Design the podium carpark elsewhere the tower design by a
senior engineer.
Tender Preparation
Attends CCM meeting and Pre Tender Meetings
Involve with authority and architect for Building Plan
submission.
2. Project : Eco-Majestic, Semenyih
Consist of 4 types of terrace house with mixed foundation. Each
type comes with different layout and different requirement from
architect good side.
Client : Eco World Development Sdn Bhd
Task & Responsibility:
Design a 2-storey of terrace house with typical end corner and
odd corner.
Design works involving of piling, footing and superstructures.
All the design and modeling works were carried out using
Orion 17 and spreadsheets for structural analysis.
Involved in piling design including pile cap.
Attend site visits, site meetings and client-consultant meetings.
Involved in all stages of project.
Involved in authority approval process.
Assist other engineer on structural design for other terrace type.
PROFESSIONAL EXPERIENCES
4. 3. Project : Eco-Sky SOHO in Taman Wahyu
Consist of 33-storey Residential Tower and 7-storey car park
Podium in Taman Wahyu, Selayang. The project has 3 towers
blocks above the car park podium. The cost of the project is
approximately MYR 600 million.
Client : Eco World Development Sdn Bhd
Task & Responsibility:
Design a 33-storey of residential tower and 7-storey of car park
podium.
Design works include Reinforced Concrete Structure and Steel
Structure.
All the design and modeling works were carried out using
Orion 17 and StaadPro software for structural analysis.
Involved in piling design including pile cap.
Manual calculations were also used when necessary.
Involved in tendering and pre-tender process.
Attend site visits, site meetings and client-consultant meetings.
Involved in authority approval process.
Assist senior engineer on structural design for other tower
blocks.
4. Project : Setia Convention Center in Setia Alam
The Setia Convention Center is the heart of Setia Alam. The
project is to propose an extension to enlarge the Convention
Center to include an Opera House inside the Center. Apart from
that, a basement car park also need to be provided to replace the
existing car park outside the Convention area.
Client : SP Setia Bhd
Task & Responsibility:
Structural design for the extension of the Convention Center.
Design include additional of 2 levels basement car park.
Design using manual calculation, Staad Pro and Orion 17
structural analysis program.
Attend client-consultant meetings.
Drafting structural layout plan and structural details drawings.
5. JULY 2012-SEPT 2012
Company :Konsortium Malaysia Sdn Bhd, Kuching, Sarawak
Designation : Trainee
I was trained as site engineer for a mini project of Mini Bridge Construction
and involved in site meetings and supervision of the project.
In the office, I had to do editing and checking of the Road Vertical Curve and
Horizontal Data together with Culvert And Cascade Drain Working Drawing
using AutoCad.
In addition, I also helped the Architectural Department to do Measured
Drawing of Shop units that required renovation.
Final Year Project : Phytoremediation of Leachate from Vegetable Waste
Using Ipomoea Aquatica
Integrated DesignProject : Designing 22-storey of Science and Technology Tower
Of UiTM using AutoCad, Esteem and Microsoft Office
Excel beginning from slabs, beams, column, and
Infrastructure
Sekolah Menengah Teknik Sejingkat, Kuching, Sarawak
Sijil Kerja Projek Lukisan Kejuruteraan – Cemerlang Gred A
School Prefect for 2005-2006 in Disciplinary Bureau.
AJK in Kelab Pinjaman Buku Teks
Attended Kursus Kepimpinan dan Pengurusan Badan Beruniform, Kelab dan Persatuan
as Kelab Pinjaman Buku Teks representative.
Secretary for Cyber Club.
Attended Kursus Cemerlang Bersama Sekolah Menengah Teknik for Physic and
Additional Mathematics as school representative among 11 top students in school.
Mara, University of Technology (UiTM)
Dean’s list for 3 semesters out of 5 semesters in Degree.
Appointed as one of the Buddy System for Reinforced Concrete design in handling,
teaching and helping 10 students per class that had failed the subject in previous
semester.
Attended the Workshop Community English Enhancement Programme Organised By
PEMBINA & UMNO Bahagian Shah Alam with Co-Operation of International Language
Academy, Brisbane, Australia.
Dean’s list for 5 semesters out of 6 semesters in Diploma.
Secretary for Civil Engineering Society UiTM (CIVES) July ’09-Nov ‘09
GRADUATE PROJECTS
CO-CURRICULAR ACTIVITIES
6. Academic Exco for Civil Engineering Society UiTM (CIVES) Dec ’08- Apr- ’09 where I
helping around 5 to 10 student with low grade and weak in their studies.
Attended Seminar Sehari Biro Tatanegara (BTN) as a participant.
Involved in Program Bomba dan Masyarakat as a Bomba Squad teaching primary school
on fire escape.
Involved in Snake Festival as a participant playing with the snake for Kursus Hampiri
dan Hindari Ular.
Attended Kursus Pengurusan Organisasi Persatuan & Kelab Dalaman.
Computer Abilities : Microsoft Office (Word, Excel and PowerPoint) (Excellent)
AutoCad (Intermediate), Orion’17 (Intermediate), StaadPro
(Intermediate)
Strength and skills :
I believe I am a hardworking, innovative and creative person. I am able to work
both independently and as a group. I am also able to work under pressure. I am eager to
learn and able to absorb fast. I am able to prepare good reports and presentation. I believe
that my energetic, active, open-minded and cheerful personality will help to enhance the
environment of the working area. I hope my attitude of high responsibility and good at
time management will benefit your company,thank you.
Current Salary : MYR 3600
Availability : Two (2) months notice
SKILLS / KNOWLEDGE / STRENGTH
EXPECTED SALARY AND AVAILABILITY
7. 1. Ir. Muhd Salmizi bin Jaafar
(Senior Lecturer in Faculty of Civil Engineering)
MARA University of Technology, (UiTM)
Faculty of Civil Engineering,
Phone: 012 – 295 1701
E-mail: salmizi@salam.uitm.edu.my
2. Ir Farah Haznee
(Senior Structural Engineer of Jurutera Perunding Tekad Maju Sdn Bhd)
E-5-27, IOI Boulevard,
Jalan Kenari 5, Bandar Puchong Jaya,
47170 Puchong, Selangor Darul Ehsan.
Phone: 019-260 2089
E-mail: farah@jptm.com.my
REFERENCES