ozpaperhelpATgmailDOTcom Faculty of Science, Engineering and Computing Assessment Form Module: Setter: Title of Assignment: Campus Project Report (CW3) Deadline: Module weighting 40% Submission details Hard copies placed in the designated ‘drop box’ Module Learning Outcomes assessed in this piece of coursework 1. Undertake control, detail , setting-out and levelling surveys using standard equipment incl. GPS . 2. Calculate spatial data from field survey measurements accurately and with a full understanding of what they represent. 3. Prepare and present survey data and supporting documentation in a clear and professional manner 5. Use (design and interpret) maps, plans and original survey data to communicate spatial information for use in design or construction. 6. Undertake a risk assessment and hazard analysis for a project site to be surveyed. Assignment Brief and Assessment Criteria (these will be discussed within a formally timetabled class) This report should be presented as a report by your (imaginary) company to Kingston University regarding the existing layout of the university land within the specified area and an outline design for the underground car park approach road. As such it must include the following sections: 1. Introduction – a brief statement of the survey project – who and what was it for, where was it done, why was it necessary, who was contracted to do it (make up something sensible), and what factual information is presented in this report.  [ 5 marks] 2. Methodology – a brief description ( not a set of instructions) of how each exercise (Parts 1-4) was carried out, including:  (i) dates and times of practical work (the survey planning and the detailing survey),    (ii) personnel involved (i.e. other group members),   (iii) weather conditions, and   (iv) any other relevant details. Present the information as if you have done everything in the correct order (i.e. Parts 1-4 at the top of the ‘Survey Planning and Utility’ practical handout). ...

1. ozpaperhelpATgmailDOTcom
Faculty of Science, Engineering and Computing
Assessment Form
Module:
Setter:
Title of Assignment:
Campus Project Report (CW3)
Deadline:
Module weighting
40%
Submission details
Hard copies placed in the designated ‘drop box’
Module Learning Outcomes assessed in this piece of coursework
1. Undertake control,
detail
, setting-out and levelling surveys using standard equipment
incl. GPS
.
2. Calculate spatial data from field survey measurements
accurately and with a full understanding of what they represent.
3. Prepare and present survey data and supporting
documentation in a clear and professional manner

2. 5. Use (design and interpret) maps, plans and original survey
data to communicate spatial information for use in design or
construction.
6. Undertake a risk assessment and hazard analysis for a project
site to be surveyed.
Assignment Brief and Assessment Criteria
(these will be discussed within a formally timetabled class)
This report should be presented as a report by your (imaginary)
company to Kingston University regarding the existing layout of
the university land within the specified area and an outline
design for the underground car park approach road. As such it
must include the following sections:
1. Introduction – a brief statement of the survey project – who
and what was it for, where was it done, why was it necessary,
who was contracted to do it (make up something sensible), and
what factual information is presented in this report. [ 5 marks]
2. Methodology – a
brief
description (
not
a set of instructions) of how
each
exercise (Parts 1-4) was carried out, including: (i) dates and
times of practical work (the survey planning and the detailing
survey), (ii) personnel involved (i.e. other group members),
(iii) weather conditions, and
(iv) any other relevant details.

3. Present the information as if you have done everything in the
correct order (i.e. Parts 1-4 at the top of the ‘Survey Planning
and Utility’ practical handout).