The transformation of concrete into decorative concrete is achieved through the use of a variety of materials that may be applied during the pouring process or after the concrete is cured.
2. The transformation of concrete into decorative
concrete is achieved through the use of a variety of
materials that may be applied during the pouring
process or after the concrete is cured.
When we hear the word concrete ,we probably picture
structural elements like footings, foundations and
slabs. Whatever we picture the material is smooth and
gray.
There are lots of ways to transform this common
structural elements into decorative elements.
3. Concrete can be made into colorful displays.
The concrete may have a 3D effect.
Our homes, buildings and work places almost any
where can be made into something that can define
beauty.
5. Most people think that, if they have to lay down new
flooring, their bank account will break. They thought
that hard wood and natural stones are quite
expensive.
Fortunately for them concrete now become as a
innovative decorative methods which are not
only gorgeous but much affordable.
6. Sub grade preparation
Placing the forms
Placing the concrete
Screeding and finishing
the concrete
Applying color
Installing joint
Installing reinforcement
Stamping process
Curing stamped concrete
Sealing stamped concrete
7. Sub grade
preparation
Placing the forms
Applying colour
Placing the
concrete
Screeding and
finishing the
concrete
Stamping
process
Installing joint Sealing stamped
concrete
8. o Stamped concrete
o Concrete dyes
o Acid staining
o Water based staining
o Overlaying
o Epoxy coating
o Polishing
o Engraving
o Form liner
9. Stamped concrete is the process of adding
texture and color to concrete to make it resemble
stone, brick and slate.
10. Concrete dyes take many different forms and
compositions and can be used on both residential and
commercial concrete applications, including sound/
retaining walls, bridges, countertops, floors.
11. Acid staining is not a dyeing or pigment base
coloring systems, but a chemical reaction. A mixture of
water, mineral salts and a slight amount of muriatic acid is
applied to the concrete surface.
12. These are similar to acid staining in the sense
that one can still achieve a traslucent look like acid.
13. Experiment with acrylic paint resins as modifiers
for cement and sand mixes. The result was a thin
cementious topping material that would adhere to
concrete surfaces and provide a newly resurfaced
coating.
14. Applied over acid stained, dyes and/ or overlays to
seal and protect.
15. Concrete can be polished with mechanical
grinders and diamond pads of increasing grit sizes.
17. Concrete can also be cast into unique and
detailed designs using form liner.
18. It can be applied to new or existing concrete surfaces.
Design options are limitless.
Easy to clean and requires little maintenance.
DISADVANTAGES
If the concrete is not sealed on both top and bottom
surfaces, it is susceptibility to penetration by moisture.
19. We get the flooring as we dreamed of, we don’t
have to resort to natural stones or other expensive
materials. With a little creativity and some work,
get almost the same result for a fraction of the
cost.