7. The B3.3 is built with a cast-iron parent bore block designed for durability
and reliability.
Direct injection for increased fuel efficiency, low heat rejection and quicker
starts
•A deep, stiff crankcase with structural ribs for lower noise and increased
life
•An isolated valve cover for reduced noise
•Optional intake air heater for cold-weather starting
•Low rotating inertia for reduced vibration
•Left- or right-side service options for easy maintenance
•SAE "A" PTO mounting option with engine-mounted, gear-driven designs
(Front-mounted crank PTO generates 100% torque for hydraulic applications)
7.
12. Performance rating of B3.3 engine :
• Standard test conditions according to SAEJ1995
1.100 kPa (29.61 in. Hg) barometric pressure.
2. 25 °C (77 °F) inlet air temperature, and 1 kPa (0.30 in.
Hg) water vapour pressure.
3. 300 mm H2O (11.8 in. H2O) inlet air restriction.
4. with 75 mm Hg (3.0 in. Hg) exhaust restriction.
5. The engine may be operated without changing the
fuel setting up to 2300 m (7,546 ft.) altitude and 38
°C (100 °F).
12.
14. 14.
1.USA : ( united state emission standard ) (By Environmental Protection
Agency)
1. Federal Standard ( Tier1, Tier2, Tier3, Tier4). ( Now Tier4 Is Going On )
2. California Emission Standard.
2.EUROPE: (European Emission Standard)
1. EURO1, EURO2, EURO3, EURO4.( Now Euro4 Is Going On)
3.INDIA:
1. INDIA 2000, BS2, BS3, BS4 .( Now BS3 & Some Cites BS4 )
15. 15
EMISSION STANDARD FOR GENSET:EMISSION STANDARD FOR GENSET:
1. CPCB (CENTRAL POLLUTION CONTROL BOARD)
Source : https://www.araiindia.com/pdf/Indian_Emission
16. TEST CYCLE FOR OFF ROAD VEHICLE / ENGINES:
16
Source : https://www.araiindia.com/pdf/Indian_Emission
17. Fuel pump for diesel engine :
1. IN LINE FUEL PUMP :
2. ROTARY FUEL
PUMP :
17