3. CCTEG
Underground
drill rigs
All hydraulic splitting rig
All hydraulic crawler rig
Hard to be moved in the
tunnel and roadway
Mature serial products
Drill depth range from 75m-
1000m
lower cost, cheaper
Easy to change sites
Integrated crawler
design
Large dimension
increases space require
of the roadway and
drill sites
1. Introduction
5. CCTEG
1. Introduction
Drill rig requirement
Small dimension in size especial in width
Extensive azimuth and inclination angle adjustment
High drill capacity (torque, feed/pull force) and efficiency
Solution
Using splitting crawler structure to reduce each unit’s
dimension
Special designed structure to achieve wide range of azimuth/
inclination adjustment
Rated torque of the rig should reach 4300 Nm
Rated pull force should reach 120kN
High quality hydraulic components, Rexroth and Sauer
10. CCTEG
electromagnetic starter tank main control panel
assistant control panel electric motor
cooler caterpillar band
3.Technical Features
Competitive small dimension width
2.63×0.85×1.8(pump unit)
12. CCTEG
3.Technical Features
①Mature Constant pressure variable displacement control system
② High quality hydraulic components(Rexroth and Sauer)
maintain system reliability
③ Linkage system and optimized pressure/flow rate control lead to
simple operation
Reliably hydraulic system
13. CCTEG
3. Technical Features
Reliable steadiness
On the base, four hydro-cylinders
can be extended to increase the stability
On the top, two hydro-
cylinders push the roof
14. CCTEG
3.Technical Features
Extensive adjustment range of drill azimuth, height and inclination
Drill height adjustment Drill azimuth adjustment
Drill height ranges from 1.3-2.3m
Azimuth angle ranges from -90 to +90
15. CCTEG
3.Technical Features
Drill inclination adjustment
ZDY4300LF: ranges from -30° to +80°
ZDY4300LF(A): ranges from -90° to +90°
Extensive adjustment range of drill azimuth, height and inclination
16. CCTEG
4. Application
(1). Luling Coal Mine, Anhui, China
Hole
No.
Azimuth
angle/°
Inclination
angle/°
Depth/
m
1# 0 40 45
2# 0 70 33
4# 0 61 36
5# 0 53 39
6# 0 46 42
8# 0 35 42
9# 0 30 59
10# 0 26 73
8 boreholes, 385m are drilled in just 4
days in experiment. Drill efficiency was
increased by more than 35% compare with
other rigs.
On-site designed borehole profile
19. CCTEG
Conclusion
Features and benifits
Competitive small dimension in width
Wide range of azimuth/ inclination adjustment
Strong drill capacity (rated torque, speed and drill depth)
Rated pull force should reach 120kN
Excellent climbing ability
High quality hydraulic components, Rexroth and Sauer
20. CCTEG
Thanks for your time!
Have a good day!
Business representative:Owen Ji
Tel:+8629-81778310
Mobile:+8613319186255
Skype:maioutwo
Email:jiqianhui@cctegxian.com
Linkedin: