Catalogo 563.

1. R E D E F I N I N G R E L I A B I L I T Y T M
Hydril 563™
Tubing Connection
BULLETIN 9401-D (REPLACES 9401-C)
Hydril 563™
Tubing Torque Values
HYDRIL HYDRIL INTERNATIONAL TUBULAR SALES
Houston, Texas Aberdeen, Scotland
Telephone: 281.985.3412 Telephone: +44.1224.299.554
Fax: 281.985.3376 Fax: +44.1224.299.578
E-mail: tubularsales@hydril.com www.hydril.com E-mail: hits@hydril.com
The minimum, field target, and buck-on torque values apply to all grades and alloys of steel.
Recommended torque values for CB and non-CB products are the same.
An appropriate safety factor should be applied to these yield torque values.
Size & Weight Mini-
mum
Buck-
On
J-55/
K-55
T-95 Q-125
Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
C-110/
P-110
Ft-Lbs
Size & Weight
J-55/
K-55
L-80/
N-80
T-95 Q-125
Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
C-110/
P-110
Ft-Lbs
Yield Torque Make Up Torque Yield Torque
Wall
Mini-
mum
Buck-
On
Field
Target
Make Up Torque
L-80/
N-80
Ft-Lbs
Field
Target
Wall
2.375 4.60 0.190 1300 1500 2400 2800 3600 4300 4900 5600
2.375 5.10 0.218 1500 1700 2700 3600 4300 4900 5600
2.375 5.80 0.254 1700 2000 3100 3600 4300 4900 5600
2.375 6.60 0.295 1900 2200 3500 3600 4300 4900 5600
2.375 7.35 0.336 2200 2500 3600 3600 4300 4900 5600
2.875 6.40 0.217 1600 1800 2900 3900 5300 6100 6900 7800
2.875 7.80 0.276 2000 2300 3600 5300 6100 6900 7800
2.875 8.60 0.308 2100 2400 3800 5300 6100 6900 7800
2.875 9.35 0.340 3500 4000 6400 8800 10000 11300 12800
2.875 10.50 0.392 4000 4600 7300 8800 10000 11300 12800
2.875 11.50 0.440 4500 5200 8200 8800 10000 11300 12800
3.500 9.20 0.254 2400 2800 4400 5900 8000 9200 10400 11800
3.500 10.20 0.289 2700 3100 4900 8000 9200 10400 11800
3.500 12.70 0.375 3300 3800 6000 8000 9200 10400 11800
3.500 14.30 0.430 6000 6900 10900 14500 16400 18400 21000
3.500 15.50 0.476 6600 7600 12000 14500 16400 18400 21000
3.500 16.70 0.510 7000 8100 12700 14500 16400 18400 21000
3.500 17.00 0.530 7400 8500 13500 14500 16400 18400 21000
4.000 11.00 0.262 2800 3200 5100 7500 10200 11800 13400 15200
4.000 11.60 0.286 3100 3600 5600 7500 10200 11800 13400 15200
4.000 13.20 0.330 3400 3900 6200 10200 11800 13400 15200
4.000 14.80 0.380 5500 6300 10000 16600 19100 21600 25000
4.000 16.10 0.415 6000 6900 10900 16600 19100 21600 25000
4.000 18.90 0.500 9100 10500 16600 23300 27000 30000 34000
4.000 21.10 0.562 10300 11800 18700 23300 27000 30000 34000
4.000 22.20 0.610 11300 13000 21000 23300 27000 30000 34000
4.500 11.60 0.250 3000 3500 5500 9200 12600 14600 16600 18900
4.500 12.60 0.271 3200 3700 5800 7700 12600 14600 16600 18900
4.500 13.50 0.290 3500 4000 6400 12600 14600 16600 18900
4.500 15.20 0.337 5100 5900 9300 19900 23000 26000 30000
4.500 17.00 0.380 5800 6700 10600 19900 23000 26000 30000
4.500 18.90 0.430 6600 7600 12000 19900 23000 26000 30000
4.500 21.50 0.500 10200 11700 18600 29000 33000 37000 42000
4.500 23.70 0.560 11500 13200 21000 29000 33000 37000 42000
4.500 26.10 0.630 13000 15000 24000 29000 33000 37000 42000
5.000 15.00 0.296 5500 6300 10000 12700 18400 21900 25000 28000
5.000 18.00 0.362 6500 7500 11800 18400 21900 25000 28000
5.000 21.40 0.437 13900 16000 25000 31000 37000 43000 49000
5.000 23.20 0.478 14500 16700 26000 31000 37000 43000 49000
5.000 24.10 0.500 15000 17300 27000 31000 37000 43000 49000
5.500 15.50 0.275 5200 6000 9500 15400 22400 27000 31000 35000
5.500 17.00 0.304 5800 6700 10600 15400 22400 27000 31000 35000
5.500 20.00 0.361 6600 7600 12000 22400 27000 31000 35000
5.500 23.00 0.415 7700 8900 14000 22400 27000 31000 35000
5.500 26.00 0.476 11000 12700 20000 27000 32000 37000 42000
5.500 26.80 0.500 12000 13800 22000 27000 32000 37000 42000
5.500 28.40 0.530 12500 14400 23000 27000 32000 37000 42000
5.500 29.70 0.562 16100 18500 29000 35000 41000 48000 55000
5.500 32.60 0.625 17600 20000 32000 35000 41000 48000 55000
6.625 24.00 0.352 7500 8600 13700 25000 37000 43000 50000 57000
6.625 28.00 0.417 8600 9900 15700 37000 43000 50000 57000
6.625 32.00 0.475 9900 11400 18000 37000 43000 50000 57000
7.000 23.00 0.317 6700 7700 12200 27000 39000 47000 54000 61000
7.000 26.00 0.362 7800 9000 14200 27000 39000 47000 54000 61000
7.000 29.00 0.408 8400 9700 15300 39000 47000 54000 61000
7.000 32.00 0.453 9500 10900 17300 39000 47000 54000 61000
7.000 35.00 0.498 14800 17000 27000 55000 65000 75000 85000
7.000 38.00 0.540 16200 18600 29000 55000 65000 75000 85000
7.000 41.00 0.590 17300 19900 31000 55000 65000 75000 85000
7.000 42.70 0.625 18700 22000 34000 55000 65000 75000 85000
First Digit Second Digit: Configuration and Pipe Ends Third Digit: Sealing System
0 - integral connection on external upset pipe
1 - integral connection on non-upset pipe w/pipe body OD box 1 - wedge thread and lubricant seal
2 - integral connection on non-upset pipe w/swaged OD box
3 - integral connection on internal/external upset pipe 3 - metal seal plus wedge thread and lubricant seal
5 - integral connection on non-upset pin end and internal/external upset box end pipe
6 - coupled connection on non-upset pipe
7 - integral connection on non-upset pin end and external upset box end pipe
Hydril Wedge Thread™
Identification
5

2. Hydril 563™
Tubing Features
For Production Tubing and Workstring Applications
Hydril 563™
Performance Data
©2006 Hydril Company LP All Rights Reserved.
High tension and bending
strengths are developed using a
run-out, dovetail thread machined
on non-upset pipe. The dovetail
thread with its double reverse
flanks resists the tendency for
radial disengagement of the partial
depth threads.
Stress distribution and low
stress levels make the Type 563
suitable for sour service. Type 563
is also recommended for use on
corrosion resistant alloys.
Trouble free make-up is devel-
oped with the rugged, coarse
pitch thread and steep taper for
deep stabbing. With the galling
resistance of low interference
threads, the Hydril 563 is well suit-
ed for use on high alloy materials.
100% internal pressure rated
metal-to-metal seal maintains
gas sealing capability under high
axial loads. The shallow angle
run-out chamfer on the pin ID of
heavier weights and the nosed
and bored ID on the pin of lighter
weights promote uniform stress
under the seal around the full
circumference of the connection.
Flow stream continuity is main-
tained with the recess-free
streamlined ID configuration.
The erosion-corrosion associated
with a turbulent flow stream is
minimized. This same Hydril 563
Tubing configuration is also
ordered as Hydril 563-RFB or
Hydril 563-GS.
Hydril 563 is interchangeable
with the Hydril 503™, 533™ and
553™ connections.
U.S. and foreign patents apply.
Exceptional torque strength
is developed through the simulta-
neous engagement of opposing
flanks of the dovetail thread. The
thread flanks provide a positive
torque stop which virtually elimi-
nates pin end ID restrictions
caused by over-torque.
100% rated compression
strength is provided by the dove-
tail threads.
100% pipe body collapse
rating is created with the
lubricant seal of the dovetail
threads. The threads also provide
a secondary internal pressure seal
rated at 100% of the pipe body.
Corrosion protection continuity
is provided by the optional
CB feature. The inert CB® ring
creates the corrosion resistant
bridge between pin and box
plastic coating without detracting
from overall connection perfor-
mance. The CB ring is recessed,
protecting it from wireline and flow
stream damage.
Special clearance OD retains
full tension and pressure ratings
of the connection. All couplings
are beveled to reduce the poten-
tial for coupling face hang-up
during running.
Visual confirmation of make-up
is attained by making up the cou-
pling face to the circumferential
roller-stenciled make-up band at
the pin thread run-out.
PIN
PIN
] Interchangeable where bracketed.
Hydril 563 is interchangeable with Hydril 503, 533 and 553 in a given size and weight.
When no value is shown for “Pin ID”, swaging is omitted and the ID is the pipe body ID.
Pipe body yield strengths are shown for use in string design calculations.
Critical section areas are shown to permit calculating minimum parting loads.
PIPE
Size & Weight
(NUE)
Inches Lbs/Ft
J-55/
K-55
Inches 1000 Lbs
Inches Inches
Inches
Inches
Inches
Inches
Drift
1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs
N-80/
L-80
T-95
C-110/
P-110
Q-125
C-90
PIPE BODY YIELD STRENGTH
Threads
per Inch
Pin ID
Make-up
Loss
ID
(Nom.)
Wall
Thickness
Inches
CONNECTION
Sq In
Critical
Section
Area
Special
Clearance
Coupling
Length
Standard
Coupling OD
2.375 4.60 0.190 1.995 1.901 2.875 2.657 8.25 1.945 3.64 3.45 1.150 72 104 117 124 143 163
2.375 5.10 0.218 1.939 1.845 2.875 2.685 8.25 1.889 3.64 3.45 1.323 118 133 140 162 185
2.375 5.80 0.254 1.867 1.773 2.875 2.737 8.25 1.817 3.64 3.45 1.538 135 152 161 186 212
2.375 6.60 0.295 1.785 1.691 2.875 2.793 8.25 3.64 3.45 1.773 154 173 183 212 241
2.375 7.35 0.336 1.703 1.609 2.875 8.25 3.64 3.45 1.998 172 194 204 237 269
2.875 6.40 0.217 2.441 2.347 3.500 3.192 8.25 2.391 3.64 3.45 1.625 100 145 163 172 199 227
2.875 7.80 0.276 2.323 2.229 3.500 3.282 8.25 2.273 3.64 3.45 2.067 180 203 214 248 282
2.875 8.60 0.308 2.259 2.165 3.500 3.328 8.25 3.64 3.45 2.297 199 224 236 273 310
2.875 9.35 0.340 2.195 2.101 3.500 3.337 9.25 4.09 3.28 2.521 217 244 257 298 338
2.875 10.50 0.392 2.091 1.997 3.500 3.405 9.25 4.09 3.28 2.871 245 275 290 336 382
2.875 11.50 0.440 1.995 1.901 3.500 3.464 9.25 4.09 3.28 3.179 269 303 320 370 421
3.500 9.20 0.254 2.992 2.867 4.250 3.886 8.25 2.942 3.64 3.45 2.362 142 207 233 246 285 324
3.500 10.20 0.289 2.922 2.797 4.250 3.941 8.25 2.872 3.64 3.45 2.687 233 262 277 321 364
3.500 12.70 0.375 2.750 2.625 4.250 4.067 8.25 3.64 3.45 3.454 295 331 350 405 460
3.500 14.30 0.430 2.640 2.515 4.250 4.100 10.00 4.49 2.94 3.878 332 373 394 456 518
3.500 15.50 0.476 2.548 2.423 4.250 4.160 10.00 4.49 2.94 4.253 362 407 430 497 565
3.500 16.70 0.510 2.480 2.355 4.250 4.202 10.00 4.49 2.94 4.521 383 431 455 527 599
3.500 17.00 0.530 2.440 2.315 4.250 10.00 4.49 2.94 4.676 396 445 470 544 618
4.000 11.00 0.262 3.476 3.351 4.750 4.406 8.25 3.426 3.64 3.45 2.816 169 246 277 292 338 385
4.000 11.60 0.286 3.428 3.303 4.750 4.444 8.25 3.378 3.64 3.45 3.076 184 267 300 317 367 417
4.000 13.20 0.330 3.340 3.215 4.750 4.513 8.25 3.64 3.45 3.544 304 342 361 419 476
4.000 14.80 0.380 3.240 3.115 4.750 4.549 9.25 4.09 3.28 4.061 346 389 411 475 540
4.000 16.10 0.415 3.170 3.045 4.750 4.599 9.25 4.09 3.28 4.413 374 421 444 514 584
4.000 18.90 0.500 3.000 2.875 4.750 4.598 11.50 5.28 2.65 5.064 440 495 522 605 687
4.000 21.10 0.562 2.876 2.751 4.750 4.679 11.50 5.28 2.65 5.636 486 546 577 668 759
4.000 22.20 0.610 2.780 2.655 4.750 11.50 5.28 2.65 6.062 520 585 617 715 812
4.500 11.60 0.250 4.000 3.875 5.200 4.891 8.25 3.950 3.64 3.45 3.044 184 267 300 317 367 417
4.500 12.60 0.271 3.958 3.833 5.200 4.926 8.25 3.908 3.64 3.45 3.307 198 288 324 342 396 450
4.500 13.50 0.290 3.920 3.795 5.200 4.958 8.25 3.870 3.64 3.45 3.542 307 345 364 422 479
4.500 15.20 0.337 3.826 3.701 5.200 4.992 9.25 4.09 3.28 4.114 353 397 419 485 551
4.500 17.00 0.380 3.740 3.615 5.200 5.058 9.25 4.09 3.28 4.625 393 443 467 541 615
4.500 18.90 0.430 3.640 3.515 5.200 5.133 9.25 4.09 3.28 5.205 440 495 522 605 687
4.500 21.50 0.500 3.500 3.375 5.200 5.114 11.50 5.28 2.65 5.794 503 565 597 691 785
4.500 23.70 0.560 3.380 3.255 5.200 11.50 5.28 2.65 6.443 555 624 659 762 866
4.500 26.10 0.630 3.240 3.115 5.300 11.50 5.28 2.65 7.171 613 689 728 843 957
5.000 15.00 0.296 4.408 4.283 5.563 5.404 9.00 4.358 3.99 3.36 3.952 241 350 394 416 481 547
5.000 18.00 0.362 4.276 4.151 5.563 9.00 3.99 3.36 4.853 422 475 501 580 659
5.000 21.40 0.437 4.126 4.001 5.750 5.511 12.00 4.076 5.36 2.65 5.566 501 564 595 689 783
5.000 23.20 0.478 4.044 3.919 5.750 5.571 12.00 5.36 2.65 6.092 543 611 645 747 849
5.000 24.10 0.500 4.000 3.875 5.750 5.603 12.00 5.36 2.65 6.370 565 636 672 778 884
5.500 15.50 0.275 4.950 4.825 6.050 5.873 9.00 4.900 3.99 3.36 4.050 248
5.500 17.00 0.304 4.892 4.767 6.050 5.921 9.00 4.842 3.99 3.36 4.498 273 397 447 471 546 620
5.500 20.00 0.361 4.778 4.653 6.050 9.00 3.99 3.36 5.364 466 525 554 641 729
5.500 23.00 0.415 4.670 4.545 6.050 9.00 3.99 3.36 6.165 530 597 630 729 829
5.500 26.00 0.476 4.548 4.423 6.125 6.057 9.75 4.483 4.30 3.06 6.742 601 676 714 826 939
5.500 26.80 0.500 4.500 4.375 6.125 9.75 4.435 4.30 3.06 7.083 628 707 746 864 982
5.500 28.40 0.530 4.440 4.315 6.125 9.75 4.374 4.30 3.06 7.504 662 745 786 910 1034
5.500 29.70 0.562 4.376 4.251 6.250 6.085 11.25 4.326 5.06 2.75 7.871 697 785 828 959 1090
5.500 32.60 0.625 4.250 4.125 6.250 6.174 11.25 5.06 2.75 8.724 766 861 909 1053 1197
6.625 24.00 0.352 5.921 5.796 7.390 7.121 9.25 5.871 4.05 3.29 6.284 382 555 624 659 763 867
6.625 28.00 0.417 5.791 5.666 7.390 7.227 9.25 4.05 3.29 7.480 651 732 773 895 1017
6.625 32.00 0.475 5.675 5.550 7.390 9.25 4.05 3.29 8.525 734 826 872 1010 1147
7.000 23.00 0.317 6.366 6.250 7.656 7.449 9.25 6.316 4.05 3.29 5.966 366 532 599 632
7.000 26.00 0.362 6.276 6.151 7.656 7.525 9.25 6.226 4.05 3.29 6.860 415 604 679 717 830 944
7.000 29.00 0.408 6.184 6.059 7.656 9.25 4.05 3.29 7.760 676 760 803 929 1056
7.000 32.00 0.453 6.094 6.000 7.656 9.25 4.05 3.29 8.628 745 839 885 1025 1165
7.000 35.00 0.498 6.004 5.879 7.750 7.557 11.25 5.954 5.06 2.75 9.092 814 916 966 1119 1272
7.000 38.00 0.540 5.920 5.795 7.750 7.623 11.25 5.870 5.06 2.75 9.878 877 986 1041 1206 1370
7.000 41.00 0.590 5.820 5.695 7.750 11.25 5.06 2.75 10.800 950 1069 1129 1307 1485
7.000 42.70 0.625 5.750 5.625 7.750 11.25 5.06 2.75 11.436 1001 1127 1189 1377 1565

3. Hydril 563™
Tubing Features
For Production Tubing and Workstring Applications
Hydril 563™
Performance Data
©2006 Hydril Company LP All Rights Reserved.
High tension and bending
strengths are developed using a
run-out, dovetail thread machined
on non-upset pipe. The dovetail
thread with its double reverse
flanks resists the tendency for
radial disengagement of the partial
depth threads.
Stress distribution and low
stress levels make the Type 563
suitable for sour service. Type 563
is also recommended for use on
corrosion resistant alloys.
Trouble free make-up is devel-
oped with the rugged, coarse
pitch thread and steep taper for
deep stabbing. With the galling
resistance of low interference
threads, the Hydril 563 is well suit-
ed for use on high alloy materials.
100% internal pressure rated
metal-to-metal seal maintains
gas sealing capability under high
axial loads. The shallow angle
run-out chamfer on the pin ID of
heavier weights and the nosed
and bored ID on the pin of lighter
weights promote uniform stress
under the seal around the full
circumference of the connection.
Flow stream continuity is main-
tained with the recess-free
streamlined ID configuration.
The erosion-corrosion associated
with a turbulent flow stream is
minimized. This same Hydril 563
Tubing configuration is also
ordered as Hydril 563-RFB or
Hydril 563-GS.
Hydril 563 is interchangeable
with the Hydril 503™, 533™ and
553™ connections.
U.S. and foreign patents apply.
Exceptional torque strength
is developed through the simulta-
neous engagement of opposing
flanks of the dovetail thread. The
thread flanks provide a positive
torque stop which virtually elimi-
nates pin end ID restrictions
caused by over-torque.
100% rated compression
strength is provided by the dove-
tail threads.
100% pipe body collapse
rating is created with the
lubricant seal of the dovetail
threads. The threads also provide
a secondary internal pressure seal
rated at 100% of the pipe body.
Corrosion protection continuity
is provided by the optional
CB feature. The inert CB® ring
creates the corrosion resistant
bridge between pin and box
plastic coating without detracting
from overall connection perfor-
mance. The CB ring is recessed,
protecting it from wireline and flow
stream damage.
Special clearance OD retains
full tension and pressure ratings
of the connection. All couplings
are beveled to reduce the poten-
tial for coupling face hang-up
during running.
Visual confirmation of make-up
is attained by making up the cou-
pling face to the circumferential
roller-stenciled make-up band at
the pin thread run-out.
PIN
PIN
] Interchangeable where bracketed.
Hydril 563 is interchangeable with Hydril 503, 533 and 553 in a given size and weight.
When no value is shown for “Pin ID”, swaging is omitted and the ID is the pipe body ID.
Pipe body yield strengths are shown for use in string design calculations.
Critical section areas are shown to permit calculating minimum parting loads.
PIPE
Size & Weight
(NUE)
Inches Lbs/Ft
J-55/
K-55
Inches 1000 Lbs
Inches Inches
Inches
Inches
Inches
Inches
Drift
1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs
N-80/
L-80
T-95
C-110/
P-110
Q-125
C-90
PIPE BODY YIELD STRENGTH
Threads
per Inch
Pin ID
Make-up
Loss
ID
(Nom.)
Wall
Thickness
Inches
CONNECTION
Sq In
Critical
Section
Area
Special
Clearance
Coupling
Length
Standard
Coupling OD
2.375 4.60 0.190 1.995 1.901 2.875 2.657 8.25 1.945 3.64 3.45 1.150 72 104 117 124 143 163
2.375 5.10 0.218 1.939 1.845 2.875 2.685 8.25 1.889 3.64 3.45 1.323 118 133 140 162 185
2.375 5.80 0.254 1.867 1.773 2.875 2.737 8.25 1.817 3.64 3.45 1.538 135 152 161 186 212
2.375 6.60 0.295 1.785 1.691 2.875 2.793 8.25 3.64 3.45 1.773 154 173 183 212 241
2.375 7.35 0.336 1.703 1.609 2.875 8.25 3.64 3.45 1.998 172 194 204 237 269
2.875 6.40 0.217 2.441 2.347 3.500 3.192 8.25 2.391 3.64 3.45 1.625 100 145 163 172 199 227
2.875 7.80 0.276 2.323 2.229 3.500 3.282 8.25 2.273 3.64 3.45 2.067 180 203 214 248 282
2.875 8.60 0.308 2.259 2.165 3.500 3.328 8.25 3.64 3.45 2.297 199 224 236 273 310
2.875 9.35 0.340 2.195 2.101 3.500 3.337 9.25 4.09 3.28 2.521 217 244 257 298 338
2.875 10.50 0.392 2.091 1.997 3.500 3.405 9.25 4.09 3.28 2.871 245 275 290 336 382
2.875 11.50 0.440 1.995 1.901 3.500 3.464 9.25 4.09 3.28 3.179 269 303 320 370 421
3.500 9.20 0.254 2.992 2.867 4.250 3.886 8.25 2.942 3.64 3.45 2.362 142 207 233 246 285 324
3.500 10.20 0.289 2.922 2.797 4.250 3.941 8.25 2.872 3.64 3.45 2.687 233 262 277 321 364
3.500 12.70 0.375 2.750 2.625 4.250 4.067 8.25 3.64 3.45 3.454 295 331 350 405 460
3.500 14.30 0.430 2.640 2.515 4.250 4.100 10.00 4.49 2.94 3.878 332 373 394 456 518
3.500 15.50 0.476 2.548 2.423 4.250 4.160 10.00 4.49 2.94 4.253 362 407 430 497 565
3.500 16.70 0.510 2.480 2.355 4.250 4.202 10.00 4.49 2.94 4.521 383 431 455 527 599
3.500 17.00 0.530 2.440 2.315 4.250 10.00 4.49 2.94 4.676 396 445 470 544 618
4.000 11.00 0.262 3.476 3.351 4.750 4.406 8.25 3.426 3.64 3.45 2.816 169 246 277 292 338 385
4.000 11.60 0.286 3.428 3.303 4.750 4.444 8.25 3.378 3.64 3.45 3.076 184 267 300 317 367 417
4.000 13.20 0.330 3.340 3.215 4.750 4.513 8.25 3.64 3.45 3.544 304 342 361 419 476
4.000 14.80 0.380 3.240 3.115 4.750 4.549 9.25 4.09 3.28 4.061 346 389 411 475 540
4.000 16.10 0.415 3.170 3.045 4.750 4.599 9.25 4.09 3.28 4.413 374 421 444 514 584
4.000 18.90 0.500 3.000 2.875 4.750 4.598 11.50 5.28 2.65 5.064 440 495 522 605 687
4.000 21.10 0.562 2.876 2.751 4.750 4.679 11.50 5.28 2.65 5.636 486 546 577 668 759
4.000 22.20 0.610 2.780 2.655 4.750 11.50 5.28 2.65 6.062 520 585 617 715 812
4.500 11.60 0.250 4.000 3.875 5.200 4.891 8.25 3.950 3.64 3.45 3.044 184 267 300 317 367 417
4.500 12.60 0.271 3.958 3.833 5.200 4.926 8.25 3.908 3.64 3.45 3.307 198 288 324 342 396 450
4.500 13.50 0.290 3.920 3.795 5.200 4.958 8.25 3.870 3.64 3.45 3.542 307 345 364 422 479
4.500 15.20 0.337 3.826 3.701 5.200 4.992 9.25 4.09 3.28 4.114 353 397 419 485 551
4.500 17.00 0.380 3.740 3.615 5.200 5.058 9.25 4.09 3.28 4.625 393 443 467 541 615
4.500 18.90 0.430 3.640 3.515 5.200 5.133 9.25 4.09 3.28 5.205 440 495 522 605 687
4.500 21.50 0.500 3.500 3.375 5.200 5.114 11.50 5.28 2.65 5.794 503 565 597 691 785
4.500 23.70 0.560 3.380 3.255 5.200 11.50 5.28 2.65 6.443 555 624 659 762 866
4.500 26.10 0.630 3.240 3.115 5.300 11.50 5.28 2.65 7.171 613 689 728 843 957
5.000 15.00 0.296 4.408 4.283 5.563 5.404 9.00 4.358 3.99 3.36 3.952 241 350 394 416 481 547
5.000 18.00 0.362 4.276 4.151 5.563 9.00 3.99 3.36 4.853 422 475 501 580 659
5.000 21.40 0.437 4.126 4.001 5.750 5.511 12.00 4.076 5.36 2.65 5.566 501 564 595 689 783
5.000 23.20 0.478 4.044 3.919 5.750 5.571 12.00 5.36 2.65 6.092 543 611 645 747 849
5.000 24.10 0.500 4.000 3.875 5.750 5.603 12.00 5.36 2.65 6.370 565 636 672 778 884
5.500 15.50 0.275 4.950 4.825 6.050 5.873 9.00 4.900 3.99 3.36 4.050 248
5.500 17.00 0.304 4.892 4.767 6.050 5.921 9.00 4.842 3.99 3.36 4.498 273 397 447 471 546 620
5.500 20.00 0.361 4.778 4.653 6.050 9.00 3.99 3.36 5.364 466 525 554 641 729
5.500 23.00 0.415 4.670 4.545 6.050 9.00 3.99 3.36 6.165 530 597 630 729 829
5.500 26.00 0.476 4.548 4.423 6.125 6.057 9.75 4.483 4.30 3.06 6.742 601 676 714 826 939
5.500 26.80 0.500 4.500 4.375 6.125 9.75 4.435 4.30 3.06 7.083 628 707 746 864 982
5.500 28.40 0.530 4.440 4.315 6.125 9.75 4.374 4.30 3.06 7.504 662 745 786 910 1034
5.500 29.70 0.562 4.376 4.251 6.250 6.085 11.25 4.326 5.06 2.75 7.871 697 785 828 959 1090
5.500 32.60 0.625 4.250 4.125 6.250 6.174 11.25 5.06 2.75 8.724 766 861 909 1053 1197
6.625 24.00 0.352 5.921 5.796 7.390 7.121 9.25 5.871 4.05 3.29 6.284 382 555 624 659 763 867
6.625 28.00 0.417 5.791 5.666 7.390 7.227 9.25 4.05 3.29 7.480 651 732 773 895 1017
6.625 32.00 0.475 5.675 5.550 7.390 9.25 4.05 3.29 8.525 734 826 872 1010 1147
7.000 23.00 0.317 6.366 6.250 7.656 7.449 9.25 6.316 4.05 3.29 5.966 366 532 599 632
7.000 26.00 0.362 6.276 6.151 7.656 7.525 9.25 6.226 4.05 3.29 6.860 415 604 679 717 830 944
7.000 29.00 0.408 6.184 6.059 7.656 9.25 4.05 3.29 7.760 676 760 803 929 1056
7.000 32.00 0.453 6.094 6.000 7.656 9.25 4.05 3.29 8.628 745 839 885 1025 1165
7.000 35.00 0.498 6.004 5.879 7.750 7.557 11.25 5.954 5.06 2.75 9.092 814 916 966 1119 1272
7.000 38.00 0.540 5.920 5.795 7.750 7.623 11.25 5.870 5.06 2.75 9.878 877 986 1041 1206 1370
7.000 41.00 0.590 5.820 5.695 7.750 11.25 5.06 2.75 10.800 950 1069 1129 1307 1485
7.000 42.70 0.625 5.750 5.625 7.750 11.25 5.06 2.75 11.436 1001 1127 1189 1377 1565

4. R E D E F I N I N G R E L I A B I L I T Y T M
Hydril 563™
Tubing Connection
BULLETIN 9401-D (REPLACES 9401-C)
Hydril 563™
Tubing Torque Values
HYDRIL HYDRIL INTERNATIONAL TUBULAR SALES
Houston, Texas Aberdeen, Scotland
Telephone: 281.985.3412 Telephone: +44.1224.299.554
Fax: 281.985.3376 Fax: +44.1224.299.578
E-mail: tubularsales@hydril.com www.hydril.com E-mail: hits@hydril.com
The minimum, field target, and buck-on torque values apply to all grades and alloys of steel.
Recommended torque values for CB and non-CB products are the same.
An appropriate safety factor should be applied to these yield torque values.
Size & Weight Mini-
mum
Buck-
On
J-55/
K-55
T-95 Q-125
Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
C-110/
P-110
Ft-Lbs
Size & Weight
J-55/
K-55
L-80/
N-80
T-95 Q-125
Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
C-110/
P-110
Ft-Lbs
Yield Torque Make Up Torque Yield Torque
Wall
Mini-
mum
Buck-
On
Field
Target
Make Up Torque
L-80/
N-80
Ft-Lbs
Field
Target
Wall
2.375 4.60 0.190 1300 1500 2400 2800 3600 4300 4900 5600
2.375 5.10 0.218 1500 1700 2700 3600 4300 4900 5600
2.375 5.80 0.254 1700 2000 3100 3600 4300 4900 5600
2.375 6.60 0.295 1900 2200 3500 3600 4300 4900 5600
2.375 7.35 0.336 2200 2500 3600 3600 4300 4900 5600
2.875 6.40 0.217 1600 1800 2900 3900 5300 6100 6900 7800
2.875 7.80 0.276 2000 2300 3600 5300 6100 6900 7800
2.875 8.60 0.308 2100 2400 3800 5300 6100 6900 7800
2.875 9.35 0.340 3500 4000 6400 8800 10000 11300 12800
2.875 10.50 0.392 4000 4600 7300 8800 10000 11300 12800
2.875 11.50 0.440 4500 5200 8200 8800 10000 11300 12800
3.500 9.20 0.254 2400 2800 4400 5900 8000 9200 10400 11800
3.500 10.20 0.289 2700 3100 4900 8000 9200 10400 11800
3.500 12.70 0.375 3300 3800 6000 8000 9200 10400 11800
3.500 14.30 0.430 6000 6900 10900 14500 16400 18400 21000
3.500 15.50 0.476 6600 7600 12000 14500 16400 18400 21000
3.500 16.70 0.510 7000 8100 12700 14500 16400 18400 21000
3.500 17.00 0.530 7400 8500 13500 14500 16400 18400 21000
4.000 11.00 0.262 2800 3200 5100 7500 10200 11800 13400 15200
4.000 11.60 0.286 3100 3600 5600 7500 10200 11800 13400 15200
4.000 13.20 0.330 3400 3900 6200 10200 11800 13400 15200
4.000 14.80 0.380 5500 6300 10000 16600 19100 21600 25000
4.000 16.10 0.415 6000 6900 10900 16600 19100 21600 25000
4.000 18.90 0.500 9100 10500 16600 23300 27000 30000 34000
4.000 21.10 0.562 10300 11800 18700 23300 27000 30000 34000
4.000 22.20 0.610 11300 13000 21000 23300 27000 30000 34000
4.500 11.60 0.250 3000 3500 5500 9200 12600 14600 16600 18900
4.500 12.60 0.271 3200 3700 5800 7700 12600 14600 16600 18900
4.500 13.50 0.290 3500 4000 6400 12600 14600 16600 18900
4.500 15.20 0.337 5100 5900 9300 19900 23000 26000 30000
4.500 17.00 0.380 5800 6700 10600 19900 23000 26000 30000
4.500 18.90 0.430 6600 7600 12000 19900 23000 26000 30000
4.500 21.50 0.500 10200 11700 18600 29000 33000 37000 42000
4.500 23.70 0.560 11500 13200 21000 29000 33000 37000 42000
4.500 26.10 0.630 13000 15000 24000 29000 33000 37000 42000
5.000 15.00 0.296 5500 6300 10000 12700 18400 21900 25000 28000
5.000 18.00 0.362 6500 7500 11800 18400 21900 25000 28000
5.000 21.40 0.437 13900 16000 25000 31000 37000 43000 49000
5.000 23.20 0.478 14500 16700 26000 31000 37000 43000 49000
5.000 24.10 0.500 15000 17300 27000 31000 37000 43000 49000
5.500 15.50 0.275 5200 6000 9500 15400 22400 27000 31000 35000
5.500 17.00 0.304 5800 6700 10600 15400 22400 27000 31000 35000
5.500 20.00 0.361 6600 7600 12000 22400 27000 31000 35000
5.500 23.00 0.415 7700 8900 14000 22400 27000 31000 35000
5.500 26.00 0.476 11000 12700 20000 27000 32000 37000 42000
5.500 26.80 0.500 12000 13800 22000 27000 32000 37000 42000
5.500 28.40 0.530 12500 14400 23000 27000 32000 37000 42000
5.500 29.70 0.562 16100 18500 29000 35000 41000 48000 55000
5.500 32.60 0.625 17600 20000 32000 35000 41000 48000 55000
6.625 24.00 0.352 7500 8600 13700 25000 37000 43000 50000 57000
6.625 28.00 0.417 8600 9900 15700 37000 43000 50000 57000
6.625 32.00 0.475 9900 11400 18000 37000 43000 50000 57000
7.000 23.00 0.317 6700 7700 12200 27000 39000 47000 54000 61000
7.000 26.00 0.362 7800 9000 14200 27000 39000 47000 54000 61000
7.000 29.00 0.408 8400 9700 15300 39000 47000 54000 61000
7.000 32.00 0.453 9500 10900 17300 39000 47000 54000 61000
7.000 35.00 0.498 14800 17000 27000 55000 65000 75000 85000
7.000 38.00 0.540 16200 18600 29000 55000 65000 75000 85000
7.000 41.00 0.590 17300 19900 31000 55000 65000 75000 85000
7.000 42.70 0.625 18700 22000 34000 55000 65000 75000 85000
First Digit Second Digit: Configuration and Pipe Ends Third Digit: Sealing System
0 - integral connection on external upset pipe
1 - integral connection on non-upset pipe w/pipe body OD box 1 - wedge thread and lubricant seal
2 - integral connection on non-upset pipe w/swaged OD box
3 - integral connection on internal/external upset pipe 3 - metal seal plus wedge thread and lubricant seal
5 - integral connection on non-upset pin end and internal/external upset box end pipe
6 - coupled connection on non-upset pipe
7 - integral connection on non-upset pin end and external upset box end pipe
Hydril Wedge Thread™
Identification
5