Produccion petroleo

1. R E D E F I N I N G R E L I A B I L I T Y T M
Hydril 533™
Tubing Connection
BULLETIN 9403-E (REPLACES 9403-D)
Hydril 533™
Tubing Torque Values
HYDRIL HYDRIL INTERNATIONAL TUBULAR SALES
Houston, Texas Aberdeen, Scotland
Telephone: 281.985.3412 Telephone: +44.1224.299.554
Fax: 281.985.3376 Fax: +44.1224.299.578
E-mail: tubularsales@hydril.com www.hydril.com E-mail: hits@hydril.com
The minimum and field target torque values apply to all grades and alloys of steel.
Recommended torque values for CB and non-CB products are the same.
An appropriate safety factor should be applied to these yield torque values.
Size & Weight Size & Weight
Wall Mini-
mum
Field
Target
Wall Mini-
mum
Field
Target
J-55/
K-55
L-80/
N-80
T-95 Q-125
C-110/
P-110
J-55/
K-55
L-80/
N-80
T-95 Q-125
C-110/
P-110
Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
Ft-Lbs Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
Ft-Lbs
Yield Torque
Make Up Torque Yield Torque Make Up Torque
2.375 4.70 0.190 1500 1700 3100 4500 5300 6200 7000
2.375 5.30 0.218 1800 2100 4500 5300 6200 7000
2.375 5.95 0.254 2100 2400 4500 5300 6200 7000
2.375 6.60 0.295 2200 2500 4500 5300 6200 7000
2.375 7.45 0.336 2600 3000 4500 5300 6200 7000
2.875 6.50 0.217 1900 2200 4600 6600 7900 9100 10300
2.875 7.90 0.276 2400 2800 6600 7900 9100 10300
2.875 8.70 0.308 2500 2900 6600 7900 9100 10300
2.875 9.50 0.340 3900 4500 8500 10100 11700 13300
2.875 10.70 0.392 4600 5300 8500 10100 11700 13300
2.875 11.65 0.440 5100 5900 8500 10100 11700 13300
3.500 9.30 0.254 2800 3200 6800 9900 11700 13600 15500
3.500 10.30 0.289 3200 3700 9900 11700 13600 15500
3.500 12.95 0.375 4000 4600 9900 11700 13600 15500
3.500 14.30 0.430 7000 8100 14700 17500 20000 23000
3.500 15.80 0.476 7800 9000 14700 17500 20000 23000
3.500 16.70 0.510 8300 9500 14700 17500 20000 23000
3.500 17.05 0.530 8700 10000 14700 17500 20000 23000
4.000 11.00 0.262 3300 3800 8900 12900 15400 17800 20000
4.000 11.60 0.286 3700 4300 8900 12900 15400 17800 20000
4.000 13.40 0.330 4000 4600 12900 15400 17800 20000
4.000 14.80 0.380 6200 7100 16800 19900 23000 26000
4.000 16.10 0.415 6800 7800 16800 19900 23000 26000
4.000 19.00 0.500 10400 12000 23000 27000 31000 35000
4.000 21.10 0.562 11800 13600 23000 27000 31000 35000
4.000 22.50 0.471 12800 14700 23000 27000 31000 35000
4.500 11.60 0.250 3800 4400 11300 16400 19500 23000 26000
4.500 12.75 0.271 3800 4400 11300 16400 19500 23000 26000
4.500 13.50 0.290 4100 4700 16400 19500 23000 26000
4.500 15.50 0.337 5800 6700 21000 25000 29000 33000
4.500 17.00 0.380 6600 7600 21000 25000 29000 33000
4.500 19.20 0.430 7500 8600 21000 25000 29000 33000
4.500 21.60 0.500 11600 13300 29000 34000 40000 45000
4.500 24.00 0.560 13100 15100 29000 34000 40000 45000
4.500 26.50 0.630 14800 17000 29000 34000 40000 45000
5.000 15.00 0.296 6300 7200 14400 21000 25000 29000 33000
5.000 18.00 0.362 7700 8900 21000 25000 29000 33000
5.000 21.40 0.437 15600 17900 36000 42000 49000 56000
5.000 23.20 0.478 16300 18700 36000 42000 49000 56000
5.000 24.10 0.500 16800 19300 36000 42000 49000 56000
5.500 15.50 0.275 6000 6900 17400
5.500 17.00 0.304 6700 7700 17400 25000 30000 35000 40000
5.500 20.00 0.361 8000 9200 25000 30000 35000 40000
5.500 23.00 0.415 9200 10600 25000 30000 35000 40000
5.500 26.00 0.476 11800 13600 29000 34000 39000 44000
5.500 26.80 0.500 12400 14300 29000 34000 39000 44000
5.500 28.40 0.530 13200 15200 29000 34000 39000 44000
6.625 24.00 0.352 8800 10100 30000 43000 51000 59000 67000
6.625 28.00 0.417 10500 12100 43000 51000 59000 67000
6.625 32.00 0.475 12000 13800 43000 51000 59000 67000
7.000 23.00 0.317 8200 9400 33000 48000 58000 67000 76000
7.000 26.00 0.362 9400 10800 33000 48000 58000 67000 76000
7.000 29.00 0.408 10600 12200 48000 58000 67000 76000
7.000 32.00 0.453 11800 13600 48000 58000 67000 76000
7.000 35.00 0.498 16200 18600 59000 70000 81000 92000
7.000 38.00 0.540 17700 20000 59000 70000 81000 92000
7.625 26.40 0.328 9500 10900 40000 58000 68000 79000 90000
7.625 29.70 0.375 10900 12500 58000 68000 79000 90000
7.625 33.70 0.430 12500 14400 58000 68000 79000 90000
7.625 39.00 0.500 18300 21000 71000 84000 97000 110000
First Digit Second Digit: Configuration and Pipe Ends Third Digit: Sealing System
0 - integral connection on external upset pipe
1 - integral connection on non-upset pipe w/pipe body OD box 1 - wedge thread and lubricant seal
2 - integral connection on non-upset pipe w/swaged OD box
3 - integral connection on internal/external upset pipe 3 - metal seal plus wedge thread and lubricant seal
5 - integral connection on non-upset pin end and internal/external upset box end pipe
6 - coupled connection on non-upset pipe
7 - integral connection on non-upset pin end and external upset box end pipe
Hydril Wedge Thread™
Identification
5

2. Hydril 533™
Tubing Features
For Production Tubing and Workstring Applications
©2006 Hydril Company LP All Rights Reserved.
PIN
BOX
Exceptional torque strength is
developed through the simultane-
ous engagement of opposing
flanks of the dovetail thread. The
thread flanks provide a positive
torque stop which virtually elimi-
nates pin end ID restrictions
caused by over-torque.
Workstring durability is devel-
oped with the rugged, coarse
pitch thread and steep taper for
deep stabbing.
100% compression rating is
provided by the reverse angle stab
flank of the dovetail threads.
Ideal for highly deviated,
extended reach, and other
applications demanding superior
rotation-while-bending capability.
The dovetail Wedge Thread™
provides excellent performance in
combined torsion, bending, and
tension or compression.
Corrosion protection continuity
is provided by the optional CB
feature. The inert CB® ring cre-
ates the corrosion resistant bridge
between pin and box plastic
coating without impairing overall
connection performance. The CB
ring is recessed, protecting it from
wireline and flow stream damage.
Streamlined, clearance OD
facilitates running, pulling, and
circulating and eliminates down-
hole coupling face hang-up.
100% pipe body ratings for ten-
sion and bending are provided by
machining pin and box on a hot
forged internal-external upset.
Connection critical areas exceed
the pipe body area.
Stress distribution and low
stress levels make the Hydril 533
suitable for sour service. Hydril
533 is also recommended for use
on 9% and 13% chromium steels.
100% pipe body collapse
strength is created with the lubri-
cant seal of the dovetail threads.
The threads also provide a sec-
ondary internal pressure seal rated
at 100% of the pipe body.
100% rated metal-to-metal seal
maintains gas sealing capability
under high axial and bending
loads. The shallow angle chamfer
on the bored ID of the pin pro-
motes uniform stress under the
seal around the full circumference
of the connection.
Flow stream continuity is main-
tained with the recess-free
streamlined ID configuration. The
erosion-corrosion associated with
a turbulent flow stream is mini-
mized.
Hydril 533 is interchangeable
with the Hydril 503™, 553™ and
the 563™ connections. Damaged
Hydril 533 connections can be
recut to the non-upset threaded
and coupled Hydril 563 retaining
interchangeability.
U.S. and foreign patents apply.
J-55/
K-55
] Interchangeable where bracketed.
Hydril 533 is interchangeable with Hydril 503, 553 and 563 in a given size and weight.
PIPE
Size & Weight
(IUE)
Inches Lbs/Ft Inches
Inches
Drift
N-80/
L-80
T-95 P-110 Q-125
C-90
PIPE BODY YIELD STRENGTH (Connection exceeds pipe body)
Bored ID -
Pin & Box
Make-up
Loss
Turned OD
Pin
Box
ID
(Nom.)
Wall
Thickness
Inches
CONNECTION
Inches Inches Inches Inches 1000 Lbs
1000 Lbs
1000 Lbs
1000 Lbs
1000 Lbs
1000 Lbs
Threads
per Inch
Hydril 533™
Performance Data
2.375 4.70 0.190 1.995 1.901 2.657 2.657 1.945 3.64 3.45 72 104 117 124 143 163
2.375 5.30 0.218 1.939 1.845 2.685 2.679 1.889 3.64 3.45 118 133 140 162 185
2.375 5.95 0.254 1.867 1.773 2.737 2.690 1.817 3.64 3.45 135 152 161 186 212
2.375 6.60 0.295 1.785 1.691 2.793 2.718 1.735 3.64 3.45 154 173 183 212 241
2.375 7.45 0.336 1.703 1.609 2.845 2.744 1.653 3.64 3.45 172 194 204 237 269
2.875 6.50 0.217 2.441 2.347 3.192 3.179 2.391 3.64 3.45 100 145 163 172 199 227
2.875 7.90 0.276 2.323 2.229 3.282 3.213 2.273 3.64 3.45 180 203 214 248 282
2.875 8.70 0.308 2.259 2.165 3.328 3.236 2.209 3.64 3.45 199 224 236 273 310
2.875 9.50 0.340 2.195 2.101 3.337 3.231 2.145 4.09 3.28 217 244 257 298 338
2.875 10.70 0.392 2.091 1.997 3.405 3.265 2.041 4.09 3.28 245 275 290 336 382
2.875 11.65 0.440 1.995 1.901 3.464 3.295 1.945 4.09 3.28 269 303 320 370 421
3.500 9.30 0.254 2.992 2.867 3.886 3.827 2.942 3.64 3.45 142 207 233 246 285 324
3.500 10.30 0.289 2.922 2.797 3.941 3.854 2.872 3.64 3.45 233 262 277 321 364
3.500 12.95 0.375 2.750 2.625 4.067 3.917 2.700 3.64 3.45 295 331 350 405 460
3.500 14.30 0.430 2.640 2.515 4.100 3.943 2.590 4.49 2.94 332 373 394 456 518
3.500 15.80 0.476 2.548 2.423 4.160 3.973 2.498 4.49 2.94 362 407 430 497 565
3.500 16.70 0.510 2.480 2.355 4.202 3.994 2.430 4.49 2.94 383 431 455 527 599
3.500 17.05 0.530 2.440 2.315 4.226 4.006 2.390 4.49 2.94 396 445 470 544 618
4.000 11.00 0.262 3.476 3.351 4.406 4.336 3.426 3.64 3.45 169 246 277 292 338 385
4.000 11.60 0.286 3.428 3.303 4.444 4.355 3.378 3.64 3.45 184 267 300 317 367 417
4.000 13.40 0.330 3.340 3.215 4.513 4.390 3.290 3.64 3.45 304 342 361 419 476
4.000 14.80 0.380 3.240 3.115 4.549 4.397 3.190 4.09 3.28 346 389 411 475 540
4.000 16.10 0.415 3.170 3.045 4.599 4.422 3.120 4.09 3.28 374 421 444 514 584
4.000 19.00 0.500 3.000 2.875 4.598 4.459 2.950 5.28 2.65 440 495 522 605 687
4.000 21.10 0.562 2.876 2.751 4.679 4.499 2.826 5.28 2.65 486 546 577 668 759
4.000 22.50 0.610 2.780 2.655 4.739 4.529 2.730 5.28 2.65 520 585 617 715 812
4.500 11.60 0.250 4.000 3.875 4.891 4.828 3.850 3.64 3.45 184 267 300 317 367 417
4.500 12.75 0.271 3.958 3.833 4.926 4.846 3.908 3.64 3.45 198 288 324 342 396 450
4.500 13.50 0.290 3.920 3.795 4.958 4.862 3.870 3.64 3.45 307 345 364 422 479
4.500 15.50 0.337 3.826 3.701 4.992 4.868 3.776 4.09 3.28 353 397 419 485 551
4.500 17.00 0.380 3.740 3.615 5.058 4.901 3.690 4.09 3.28 393 443 467 541 615
4.500 19.20 0.430 3.640 3.515 5.133 4.938 3.590 4.09 3.28 440 495 522 605 687
4.500 21.60 0.500 3.500 3.375 5.114 4.966 3.450 5.28 2.65 503 565 597 691 785
4.500 24.00 0.560 3.380 3.255 5.196 5.007 3.330 5.28 2.65 555 624 659 762 866
4.500 26.50 0.630 3.240 3.115 5.288 5.053 3.190 5.28 2.65 613 689 728 843 957
5.000 15.00 0.296 4.408 4.283 5.430 5.279 4.358 3.99 3.36 241 350 394 416 481 547
5.000 18.00 0.362 4.276 4.151 5.535 5.279 4.226 3.99 3.36 422 475 501 580 659
5.000 21.40 0.437 4.126 4.001 5.526 5.416 4.076 5.36 2.65 501 564 595 689 783
5.000 23.20 0.478 4.044 3.919 5.586 5.446 3.994 5.36 2.65 543 611 645 747 849
5.000 24.10 0.500 4.000 3.875 5.618 5.462 3.950 5.36 2.65 565 636 672 778 884
5.500 15.50 0.275 4.950 4.825 5.899 5.779 4.900 3.99 3.36 248
5.500 17.00 0.304 4.892 4.767 5.948 5.779 4.842 3.99 3.36 273 397 447 471 546 620
5.500 20.00 0.361 4.778 4.653 6.040 5.779 4.728 3.99 3.36 466 525 554 641 729
5.500 23.00 0.415 4.670 4.545 6.124 5.779 4.620 3.99 3.36 530 597 630 729 829
5.500 26.00 0.476 4.548 4.423 6.084 5.798 4.483 4.30 3.06 601 676 714 826 939
5.500 26.80 0.500 4.500 4.375 6.119 5.798 4.435 4.30 3.06 628 707 746 864 982
5.500 28.40 0.530 4.440 4.315 6.163 5.798 4.374 4.30 3.06 662 745 786 910 1034
6.625 24.00 0.352 5.921 5.796 7.147 6.932 5.871 4.05 3.29 382 555 624 659 763 867
6.625 28.00 0.417 5.791 5.666 7.254 6.932 5.741 4.05 3.29 651 732 773 895 1017
6.625 32.00 0.475 5.675 5.550 7.345 6.932 5.625 4.05 3.29 734 826 872 1010 1147
7.000 23.00 0.317 6.366 6.250 7.476 7.318 6.316 4.05 3.29 366 532 599 632
7.000 26.00 0.362 6.276 6.151 7.552 7.318 6.226 4.05 3.29 415 604 679 717 830 944
7.000 29.00 0.408 6.184 6.059 7.628 7.318 6.134 4.05 3.29 676 760 803 929 1056
7.000 32.00 0.453 6.094 6.000 7.700 7.318 6.050 4.05 3.29 745 839 885 1025 1165
7.000 35.00 0.498 6.004 5.879 7.584 7.320 5.944 5.06 2.75 814 916 966 1119 1272
7.000 38.00 0.540 5.920 5.795 7.649 7.320 5.860 5.06 2.75 877 986 1041 1206 1370
7.625 26.40 0.328 6.969 6.844 8.123 7.941 6.919 4.05 3.29 414 602 677 714 827 940
7.625 29.70 0.375 6.875 6.750 8.203 7.941 6.825 4.05 3.29 683 769 811 940 1068
7.625 33.70 0.430 6.765 6.640 8.294 7.941 6.715 4.05 3.29 778 875 923 1069 1215
7.625 39.00 0.500 6.625 6.500 8.243 7.971 6.575 5.06 2.75 895 1007 1063 1231 1399

3. Hydril 533™
Tubing Features
For Production Tubing and Workstring Applications
©2006 Hydril Company LP All Rights Reserved.
PIN
BOX
Exceptional torque strength is
developed through the simultane-
ous engagement of opposing
flanks of the dovetail thread. The
thread flanks provide a positive
torque stop which virtually elimi-
nates pin end ID restrictions
caused by over-torque.
Workstring durability is devel-
oped with the rugged, coarse
pitch thread and steep taper for
deep stabbing.
100% compression rating is
provided by the reverse angle stab
flank of the dovetail threads.
Ideal for highly deviated,
extended reach, and other
applications demanding superior
rotation-while-bending capability.
The dovetail Wedge Thread™
provides excellent performance in
combined torsion, bending, and
tension or compression.
Corrosion protection continuity
is provided by the optional CB
feature. The inert CB® ring cre-
ates the corrosion resistant bridge
between pin and box plastic
coating without impairing overall
connection performance. The CB
ring is recessed, protecting it from
wireline and flow stream damage.
Streamlined, clearance OD
facilitates running, pulling, and
circulating and eliminates down-
hole coupling face hang-up.
100% pipe body ratings for ten-
sion and bending are provided by
machining pin and box on a hot
forged internal-external upset.
Connection critical areas exceed
the pipe body area.
Stress distribution and low
stress levels make the Hydril 533
suitable for sour service. Hydril
533 is also recommended for use
on 9% and 13% chromium steels.
100% pipe body collapse
strength is created with the lubri-
cant seal of the dovetail threads.
The threads also provide a sec-
ondary internal pressure seal rated
at 100% of the pipe body.
100% rated metal-to-metal seal
maintains gas sealing capability
under high axial and bending
loads. The shallow angle chamfer
on the bored ID of the pin pro-
motes uniform stress under the
seal around the full circumference
of the connection.
Flow stream continuity is main-
tained with the recess-free
streamlined ID configuration. The
erosion-corrosion associated with
a turbulent flow stream is mini-
mized.
Hydril 533 is interchangeable
with the Hydril 503™, 553™ and
the 563™ connections. Damaged
Hydril 533 connections can be
recut to the non-upset threaded
and coupled Hydril 563 retaining
interchangeability.
U.S. and foreign patents apply.
J-55/
K-55
] Interchangeable where bracketed.
Hydril 533 is interchangeable with Hydril 503, 553 and 563 in a given size and weight.
PIPE
Size & Weight
(IUE)
Inches Lbs/Ft Inches
Inches
Drift
N-80/
L-80
T-95 P-110 Q-125
C-90
PIPE BODY YIELD STRENGTH (Connection exceeds pipe body)
Bored ID -
Pin & Box
Make-up
Loss
Turned OD
Pin
Box
ID
(Nom.)
Wall
Thickness
Inches
CONNECTION
Inches Inches Inches Inches 1000 Lbs
1000 Lbs
1000 Lbs
1000 Lbs
1000 Lbs
1000 Lbs
Threads
per Inch
Hydril 533™
Performance Data
2.375 4.70 0.190 1.995 1.901 2.657 2.657 1.945 3.64 3.45 72 104 117 124 143 163
2.375 5.30 0.218 1.939 1.845 2.685 2.679 1.889 3.64 3.45 118 133 140 162 185
2.375 5.95 0.254 1.867 1.773 2.737 2.690 1.817 3.64 3.45 135 152 161 186 212
2.375 6.60 0.295 1.785 1.691 2.793 2.718 1.735 3.64 3.45 154 173 183 212 241
2.375 7.45 0.336 1.703 1.609 2.845 2.744 1.653 3.64 3.45 172 194 204 237 269
2.875 6.50 0.217 2.441 2.347 3.192 3.179 2.391 3.64 3.45 100 145 163 172 199 227
2.875 7.90 0.276 2.323 2.229 3.282 3.213 2.273 3.64 3.45 180 203 214 248 282
2.875 8.70 0.308 2.259 2.165 3.328 3.236 2.209 3.64 3.45 199 224 236 273 310
2.875 9.50 0.340 2.195 2.101 3.337 3.231 2.145 4.09 3.28 217 244 257 298 338
2.875 10.70 0.392 2.091 1.997 3.405 3.265 2.041 4.09 3.28 245 275 290 336 382
2.875 11.65 0.440 1.995 1.901 3.464 3.295 1.945 4.09 3.28 269 303 320 370 421
3.500 9.30 0.254 2.992 2.867 3.886 3.827 2.942 3.64 3.45 142 207 233 246 285 324
3.500 10.30 0.289 2.922 2.797 3.941 3.854 2.872 3.64 3.45 233 262 277 321 364
3.500 12.95 0.375 2.750 2.625 4.067 3.917 2.700 3.64 3.45 295 331 350 405 460
3.500 14.30 0.430 2.640 2.515 4.100 3.943 2.590 4.49 2.94 332 373 394 456 518
3.500 15.80 0.476 2.548 2.423 4.160 3.973 2.498 4.49 2.94 362 407 430 497 565
3.500 16.70 0.510 2.480 2.355 4.202 3.994 2.430 4.49 2.94 383 431 455 527 599
3.500 17.05 0.530 2.440 2.315 4.226 4.006 2.390 4.49 2.94 396 445 470 544 618
4.000 11.00 0.262 3.476 3.351 4.406 4.336 3.426 3.64 3.45 169 246 277 292 338 385
4.000 11.60 0.286 3.428 3.303 4.444 4.355 3.378 3.64 3.45 184 267 300 317 367 417
4.000 13.40 0.330 3.340 3.215 4.513 4.390 3.290 3.64 3.45 304 342 361 419 476
4.000 14.80 0.380 3.240 3.115 4.549 4.397 3.190 4.09 3.28 346 389 411 475 540
4.000 16.10 0.415 3.170 3.045 4.599 4.422 3.120 4.09 3.28 374 421 444 514 584
4.000 19.00 0.500 3.000 2.875 4.598 4.459 2.950 5.28 2.65 440 495 522 605 687
4.000 21.10 0.562 2.876 2.751 4.679 4.499 2.826 5.28 2.65 486 546 577 668 759
4.000 22.50 0.610 2.780 2.655 4.739 4.529 2.730 5.28 2.65 520 585 617 715 812
4.500 11.60 0.250 4.000 3.875 4.891 4.828 3.850 3.64 3.45 184 267 300 317 367 417
4.500 12.75 0.271 3.958 3.833 4.926 4.846 3.908 3.64 3.45 198 288 324 342 396 450
4.500 13.50 0.290 3.920 3.795 4.958 4.862 3.870 3.64 3.45 307 345 364 422 479
4.500 15.50 0.337 3.826 3.701 4.992 4.868 3.776 4.09 3.28 353 397 419 485 551
4.500 17.00 0.380 3.740 3.615 5.058 4.901 3.690 4.09 3.28 393 443 467 541 615
4.500 19.20 0.430 3.640 3.515 5.133 4.938 3.590 4.09 3.28 440 495 522 605 687
4.500 21.60 0.500 3.500 3.375 5.114 4.966 3.450 5.28 2.65 503 565 597 691 785
4.500 24.00 0.560 3.380 3.255 5.196 5.007 3.330 5.28 2.65 555 624 659 762 866
4.500 26.50 0.630 3.240 3.115 5.288 5.053 3.190 5.28 2.65 613 689 728 843 957
5.000 15.00 0.296 4.408 4.283 5.430 5.279 4.358 3.99 3.36 241 350 394 416 481 547
5.000 18.00 0.362 4.276 4.151 5.535 5.279 4.226 3.99 3.36 422 475 501 580 659
5.000 21.40 0.437 4.126 4.001 5.526 5.416 4.076 5.36 2.65 501 564 595 689 783
5.000 23.20 0.478 4.044 3.919 5.586 5.446 3.994 5.36 2.65 543 611 645 747 849
5.000 24.10 0.500 4.000 3.875 5.618 5.462 3.950 5.36 2.65 565 636 672 778 884
5.500 15.50 0.275 4.950 4.825 5.899 5.779 4.900 3.99 3.36 248
5.500 17.00 0.304 4.892 4.767 5.948 5.779 4.842 3.99 3.36 273 397 447 471 546 620
5.500 20.00 0.361 4.778 4.653 6.040 5.779 4.728 3.99 3.36 466 525 554 641 729
5.500 23.00 0.415 4.670 4.545 6.124 5.779 4.620 3.99 3.36 530 597 630 729 829
5.500 26.00 0.476 4.548 4.423 6.084 5.798 4.483 4.30 3.06 601 676 714 826 939
5.500 26.80 0.500 4.500 4.375 6.119 5.798 4.435 4.30 3.06 628 707 746 864 982
5.500 28.40 0.530 4.440 4.315 6.163 5.798 4.374 4.30 3.06 662 745 786 910 1034
6.625 24.00 0.352 5.921 5.796 7.147 6.932 5.871 4.05 3.29 382 555 624 659 763 867
6.625 28.00 0.417 5.791 5.666 7.254 6.932 5.741 4.05 3.29 651 732 773 895 1017
6.625 32.00 0.475 5.675 5.550 7.345 6.932 5.625 4.05 3.29 734 826 872 1010 1147
7.000 23.00 0.317 6.366 6.250 7.476 7.318 6.316 4.05 3.29 366 532 599 632
7.000 26.00 0.362 6.276 6.151 7.552 7.318 6.226 4.05 3.29 415 604 679 717 830 944
7.000 29.00 0.408 6.184 6.059 7.628 7.318 6.134 4.05 3.29 676 760 803 929 1056
7.000 32.00 0.453 6.094 6.000 7.700 7.318 6.050 4.05 3.29 745 839 885 1025 1165
7.000 35.00 0.498 6.004 5.879 7.584 7.320 5.944 5.06 2.75 814 916 966 1119 1272
7.000 38.00 0.540 5.920 5.795 7.649 7.320 5.860 5.06 2.75 877 986 1041 1206 1370
7.625 26.40 0.328 6.969 6.844 8.123 7.941 6.919 4.05 3.29 414 602 677 714 827 940
7.625 29.70 0.375 6.875 6.750 8.203 7.941 6.825 4.05 3.29 683 769 811 940 1068
7.625 33.70 0.430 6.765 6.640 8.294 7.941 6.715 4.05 3.29 778 875 923 1069 1215
7.625 39.00 0.500 6.625 6.500 8.243 7.971 6.575 5.06 2.75 895 1007 1063 1231 1399

4. R E D E F I N I N G R E L I A B I L I T Y T M
Hydril 533™
Tubing Connection
BULLETIN 9403-E (REPLACES 9403-D)
Hydril 533™
Tubing Torque Values
HYDRIL HYDRIL INTERNATIONAL TUBULAR SALES
Houston, Texas Aberdeen, Scotland
Telephone: 281.985.3412 Telephone: +44.1224.299.554
Fax: 281.985.3376 Fax: +44.1224.299.578
E-mail: tubularsales@hydril.com www.hydril.com E-mail: hits@hydril.com
The minimum and field target torque values apply to all grades and alloys of steel.
Recommended torque values for CB and non-CB products are the same.
An appropriate safety factor should be applied to these yield torque values.
Size & Weight Size & Weight
Wall Mini-
mum
Field
Target
Wall Mini-
mum
Field
Target
J-55/
K-55
L-80/
N-80
T-95 Q-125
C-110/
P-110
J-55/
K-55
L-80/
N-80
T-95 Q-125
C-110/
P-110
Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
Ft-Lbs Inches Lbs/Ft Inches Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
Ft-Lbs
Yield Torque
Make Up Torque Yield Torque Make Up Torque
2.375 4.70 0.190 1500 1700 3100 4500 5300 6200 7000
2.375 5.30 0.218 1800 2100 4500 5300 6200 7000
2.375 5.95 0.254 2100 2400 4500 5300 6200 7000
2.375 6.60 0.295 2200 2500 4500 5300 6200 7000
2.375 7.45 0.336 2600 3000 4500 5300 6200 7000
2.875 6.50 0.217 1900 2200 4600 6600 7900 9100 10300
2.875 7.90 0.276 2400 2800 6600 7900 9100 10300
2.875 8.70 0.308 2500 2900 6600 7900 9100 10300
2.875 9.50 0.340 3900 4500 8500 10100 11700 13300
2.875 10.70 0.392 4600 5300 8500 10100 11700 13300
2.875 11.65 0.440 5100 5900 8500 10100 11700 13300
3.500 9.30 0.254 2800 3200 6800 9900 11700 13600 15500
3.500 10.30 0.289 3200 3700 9900 11700 13600 15500
3.500 12.95 0.375 4000 4600 9900 11700 13600 15500
3.500 14.30 0.430 7000 8100 14700 17500 20000 23000
3.500 15.80 0.476 7800 9000 14700 17500 20000 23000
3.500 16.70 0.510 8300 9500 14700 17500 20000 23000
3.500 17.05 0.530 8700 10000 14700 17500 20000 23000
4.000 11.00 0.262 3300 3800 8900 12900 15400 17800 20000
4.000 11.60 0.286 3700 4300 8900 12900 15400 17800 20000
4.000 13.40 0.330 4000 4600 12900 15400 17800 20000
4.000 14.80 0.380 6200 7100 16800 19900 23000 26000
4.000 16.10 0.415 6800 7800 16800 19900 23000 26000
4.000 19.00 0.500 10400 12000 23000 27000 31000 35000
4.000 21.10 0.562 11800 13600 23000 27000 31000 35000
4.000 22.50 0.471 12800 14700 23000 27000 31000 35000
4.500 11.60 0.250 3800 4400 11300 16400 19500 23000 26000
4.500 12.75 0.271 3800 4400 11300 16400 19500 23000 26000
4.500 13.50 0.290 4100 4700 16400 19500 23000 26000
4.500 15.50 0.337 5800 6700 21000 25000 29000 33000
4.500 17.00 0.380 6600 7600 21000 25000 29000 33000
4.500 19.20 0.430 7500 8600 21000 25000 29000 33000
4.500 21.60 0.500 11600 13300 29000 34000 40000 45000
4.500 24.00 0.560 13100 15100 29000 34000 40000 45000
4.500 26.50 0.630 14800 17000 29000 34000 40000 45000
5.000 15.00 0.296 6300 7200 14400 21000 25000 29000 33000
5.000 18.00 0.362 7700 8900 21000 25000 29000 33000
5.000 21.40 0.437 15600 17900 36000 42000 49000 56000
5.000 23.20 0.478 16300 18700 36000 42000 49000 56000
5.000 24.10 0.500 16800 19300 36000 42000 49000 56000
5.500 15.50 0.275 6000 6900 17400
5.500 17.00 0.304 6700 7700 17400 25000 30000 35000 40000
5.500 20.00 0.361 8000 9200 25000 30000 35000 40000
5.500 23.00 0.415 9200 10600 25000 30000 35000 40000
5.500 26.00 0.476 11800 13600 29000 34000 39000 44000
5.500 26.80 0.500 12400 14300 29000 34000 39000 44000
5.500 28.40 0.530 13200 15200 29000 34000 39000 44000
6.625 24.00 0.352 8800 10100 30000 43000 51000 59000 67000
6.625 28.00 0.417 10500 12100 43000 51000 59000 67000
6.625 32.00 0.475 12000 13800 43000 51000 59000 67000
7.000 23.00 0.317 8200 9400 33000 48000 58000 67000 76000
7.000 26.00 0.362 9400 10800 33000 48000 58000 67000 76000
7.000 29.00 0.408 10600 12200 48000 58000 67000 76000
7.000 32.00 0.453 11800 13600 48000 58000 67000 76000
7.000 35.00 0.498 16200 18600 59000 70000 81000 92000
7.000 38.00 0.540 17700 20000 59000 70000 81000 92000
7.625 26.40 0.328 9500 10900 40000 58000 68000 79000 90000
7.625 29.70 0.375 10900 12500 58000 68000 79000 90000
7.625 33.70 0.430 12500 14400 58000 68000 79000 90000
7.625 39.00 0.500 18300 21000 71000 84000 97000 110000
First Digit Second Digit: Configuration and Pipe Ends Third Digit: Sealing System
0 - integral connection on external upset pipe
1 - integral connection on non-upset pipe w/pipe body OD box 1 - wedge thread and lubricant seal
2 - integral connection on non-upset pipe w/swaged OD box
3 - integral connection on internal/external upset pipe 3 - metal seal plus wedge thread and lubricant seal
5 - integral connection on non-upset pin end and internal/external upset box end pipe
6 - coupled connection on non-upset pipe
7 - integral connection on non-upset pin end and external upset box end pipe
Hydril Wedge Thread™
Identification
5