Ginkgo Biloba Extract 50:1

1. Chem2Market GmbH
Planckstraße 17
22765 Hamburg
Deutschland
info@chem2market.com
+49 40 80 79 60 10
Spec Ginkgo Biloba Extract 50:1 (15980)
Product and Batch Information
Product Name COA Ginkgo Biloba Extract 50:1 Origin China
Latin Name Ginkgo biloba Part used Leaves
Item Specification
Appearance Brown Fine Powder
Odor Characteristic
Particle Size 100% Through 80 Mesh sieve
Bulk density 0.35g/ml-0.65gml water
TLC Positive Reaction
Loss on drying (5h at 105°C) ≤5.0%
Ash (3h at 600°C) ≤5.0%
Extract Ratio 50:1
Residual of Solvent Eur. Pharm. 2000
Aflatoxins Meets EU Limits
Heavy Metals Specification
Heavy Metals (as Pb) ≤10ppm
Arsenic ≤1ppm
Lead ≤2ppm
Cadmium ≤1ppm
Mercury ≤0.1ppm
Microbiology Specification
Total Bacterial Count Max. 10,000 cfu/g
Yeast & Mould Max. 300 cfu/g
Coliforms Negative
E. Coli Negative
Salmonella Negative
Staphylococcus Aureus Negative
Statements Specification
GMO Status Non-GMO
Irradiation Status Non Irradiated
TSE/BSE Status TSE/BSE Free
Conclusion: We certify the above product manufactured and shipped by us is the heighest quality and in conformity with our product standard.
Disclaimer
This document, or any answers or information provided herein by Chem2Market GmbH, does not constitute a legally binding obligation of Chem2Market GmbH. While the descriptions, designs, data
and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we
recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. It does not relieve our customers from the obligation to perform a full inspection of the
products upon delivery or any other obligation.NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR
INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS
PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE