Including Battery Hydraulic Crimping Tools,Cutting Tools,Hole Punching Tools,Pipe Tools,Production in Germany's quality control standards, through good upgrade technology make the products have the security of the hydraulic power system, combined with human body engineering design let the operator can be more assured the use of safety. Feature: 1. Microcomputer control system-automatically detect pressure when it is crimping, with double safety protect. 2. The hydraulic unit incorporates an automatic retraction which returns the piston into it is starting position when the maximum operating pressure is reached. 3. The tool equipped with a fast approach towards the connecting material and a slow working stroke. 4. The crimping head can be smoothly turned by 360°around the longitudinal axis in order to gain better access to tight comers and other difficult working areas. 5. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes. 6. All tools can be controlled by one trigger. These results in an easy handling and a better grip compared to a two button operation. 7. Lion batteries do neither have a memory effect nor self-discharge. Even after long periods of non-operation the tool is always ready to operate. In addition we see a low power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries. 8. A Temperature sensor makes the tool stop working automatically when the temperature over 60 degree. 9. Under long time working, the fault signal sounds; it means the tool can’t continue work until the temperature reduced to the normal.

1. EZ series Battery Operated Hydraulic Tools
FEATURES:
 On-site control: Control and Inspection; electronics with integrated pressure test provides
an immediate error display without the use of additional equipment
 Efficiency control: Multifunctional LED indicates maintenance and battery control
 Automatic retraction stop (ARS) after completed crimping: stops at the correct position
to secure further multiple parallel crimps of similar type
 High performance 18 V Lithium-Ion Batteries offering 50% higher capacity
 Power save function through motor stop feature (Automatic stop)
once operation cycle is completed.
 Two stage hydraulics more powerful
Battery-powered CRIMPING Tools
ITEM:EZ-300
Crimping force: 60KN
Stroke: 17mm
Crimping per charge: 320 crimps (150 mm2
Cu cable)
Crimping cycle: 3s-6s(depend on the size）
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2-2.5hs
Package: steel case
Accessories: 16,25,35,50,70,95,120,150,185,240,300mm2
Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve
Battery Hydraulic CABLE CUTTER
ITEM:EZ-45
Cutting force: 60KN
Stroke: 50mm
Cutting cycle: 130 times
Cutting range: 45mm(Cu/Al cable)
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2-2.5hs
Package: steel case
Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

2. Battery Operated Hydraulic Tools
Ultra safe, ultra good
 Because of its well-balanced position of centre of gravity the new EZ series
lies well in the hand and enables a comfortable handling and a fatigue-proof operation
over a longer period even during overhead operations.
 In case of a faulty crimp operation an optical and acoustical signal warns immediately.
 Where absolute safety is concerned you do very well with the EZ series battery operated crimping tools.
Battery Operated CRIMPING Tools
ITEM:EZ-400
Crimping force: 120KN
Stroke: 42mm
Crimping per charge: 120 crimps （150mm2
Cu cable）
Crimping cycle: 6s-18s（depend on the size）
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hs
Package: steel case
Accessories: 16,25,35,50,70,95,120,150,185,240,300,400mm2
Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve
Battery Hydraulic crimping Tools
ITEM:EZ-400U
Crimping force: 120KN
Stroke: 20mm
Crimping per charge: 150 crimps （150mm2
Cu cable）
Crimping cycle: 4s-12s（depend on the size）
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hs
Package: steel case
Accessories: 16,25,35,50,70,95,120,150,185,240,300,400mm2
Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

3. MULTIFUNCTION BATTERY POWERED TOOL
Battery Operated Hydraulic Tools
ITEM:EZ-60UNV MULTIFUNCTION
Crimping force: 60KN
Stroke: 42mm
Crimping cycle: 70crimps
Crimping cycle: 320 times
max cutting: 40mm(Cu/Al and armored cable)
punches per charge: 100punches
max punching hole: round
puncher: 61.5mm
punches: the thickness below 3mm(90x90mm)
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hs
Package: steel case
Crimping dies: 16,25,35,50,70,95,120,150,185,240,300mm2
Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve
ADAPTER AND DIES FOR EZ-60UNV MULTIFUNCTION
ADAPTER APPLICATION:CRIMPING CRIMPING PROFILE
Cu compression cable lugs and
Compression joints 16-300mm2
AI compression cable lugs and
Compression joints 10-240mm2
BLADE APPLICATION:CUTTING
￠40mm Cu/AI cable and
Armored Cu/AI cable
ADAPTER APPLICATION:PUNCHING
Round punches:
The thickness below 3mm(￠16.5-60.5mm)for mild steel
The thickness below 2mm(￠16.5-115.5mm)for mild steel
The thickness below 2mm(￠16.5-60.5mm)for stainless steel
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

4. MINI BATTERY CRIMPING TOOL
Battery Operated CRIMPING Tools
ITEM:EZ-240
Crimping force: 50KN
Stroke: 12mm
Crimping per charge: 170 crimps （150mm2
Cu cable）
Crimping cycle: 3s-6s（depend on the size）
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hours
Package: steel case
Accessories:
Crimping dies 16,25,35,50,70,95,120,150,185,240mm2
Battery: 2 pcs
Charger: 1 pcs
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set
Battery Operated CRIMPING Tools
ITEM:EZ-150
Crimping force: 35KN
Stroke: 9mm
Crimping per charge: 320 crimps （150mm2
Cu cable）
Crimping cycle: 3s-6s（depend on the size）
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hours
Package: steel case
Accessories:
Crimping dies 4,6,8,10,16,25,35,50,70,95,120,150mm2
Battery: 2 pcs
Charger: 1 pcs
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

5. BATTERY OPERATED HYDRAULIC TOOL
Battery Operated CRIMPING Tools
ITEM:EZ-6B
Crimping force: 60KN
Stroke: 35mm
Crimping per charge: 250 crimps （150mm2
Cu cable）
Crimping cycle: 3s-6s（depend on the size）
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hours
Package: steel case
Accessories:
Battery: 2 pcs
Charger: 1 pcs
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set
Battery Operated ELECTRIC PUMP
ITEM:EZP-60
Pressure: 70Mpa
Battery voltage: 18v
Battery capacity: 3.0Ah
Charging time: 2hours
Package: steel case
Accessories:
Battery: 2 pcs
Charger: 1 pcs
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

6. BATTERY PUNCH DRIVER
FEATURES:
1. State of the art 18V Li-ion battery provides 70% more cycle per charge and faster cycle time.
2. LED light provides the operator with the battery charge and tool maintenance status.
3. Forward handle position improves tool balance. One trigger controls all tool functions.
4. Punching cycle stops automatically when hole is complete to prevent damage to punch.
5. The battery voltage available from AC 100V~240V 50~60HZ.
Battery Operated PUNCH DRIVER
ITEM:EZ-8
Max. Punch force: 80KN
Max. Ram Stroke: 25mm
Punch/charge: 180times
Battery Voltage: 18V, 3.0Ah, Li-ion
Max. Round Punch Size(in 3.5mm mild steel):61.5mm dia.
Charging time: 2 hours
Accessories:
Hole Size(TYPE C)
Description
Dia.(inch) Dia.(mm)
1/2” Conduit Size Punch Die 7/8” .885 22.50
3/4” Conduit Size Punch Die 1.115 28.30
1” Conduit Size Punch Die 1.362 34.60
1-1/4” Conduit Size Punch Die 1.701 43.20
1-1/2” Conduit Size Punch Die 1-15/16”1.951 49.60
2” Conduit Size Punch Die 2-3/8” 2.146 61.50
3/8”*2-13/16” Draw Stud 1pc
3/4”*4-1/8” Draw Stud 1pc
Spacer 1pc
Sealing Kit 1pc
Battery 2pc
Charger 1pc
Sealing ring of cylinder 1set
Sealing ring of safety valve 1set
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

7. BATTERY PUNCH DRIVER
FEATURES:
1. State of the art 18V Li-ion battery provides 70% more cycle per charge and faster cycle time.
2. LED light provides the operator with the battery charge and tool maintenance status.
3. Forward handle position improves tool balance. One trigger controls all tool functions.
4. Punching cycle stops automatically when hole is complete to prevent damage to punch.
5. The battery voltage available from AC 100V~240V 50~60HZ.
Battery Operated PUNCH DRIVER
ITEM:EZ-12
Max. Punch force: 120KN
Max. Ram Stroke: 25mm
Punch/charge: 180times
Battery Voltage: 18V, 3.0Ah, Li-ion
Max. Round Punch Size(in 3.5mm mild steel):61.5mm dia.
Charging time: 2 hours
Accessories:
Hole Size(TYPE C)
Description
Dia.(inch) Dia.(mm)
1/2” Conduit Size Punch Die 7/8” .885 22.50
3/4” Conduit Size Punch Die 1.115 28.30
1” Conduit Size Punch Die 1.362 34.60
1-1/4” Conduit Size Punch Die 1.701 43.20
1-1/2” Conduit Size Punch Die 1-15/16”1.951 49.60
2” Conduit Size Punch Die 2-3/8” 2.146 61.50
3/8”*2-13/16” Draw Stud 1pc
3/4”*4-1/8” Draw Stud 1pc
Spacer 1pc
Sealing Kit 1pc
Battery 2pc
Charger 1pc
Sealing ring of cylinder 1set
Sealing ring of safety valve 1set
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine

8. BATTERY POWERED PIPE TOOLS
Battery Operated CRIMPING TOOLS
ITEM:EZ-150
Clamping force: 20KN
Clamping range: 12-40mm
Stroke: 40mm
Connecting/Charge: 320times
Working cycle: 3-10s
Voltage: 18V
Capacity: 3.0Ah
Charging time: 2hours
Package: Steel case
ACCESSORIES:
Dies: 12, 16, 20, 32, 25-40mm2
Battery: 2pc
Charger: 1pc
Sealing ring of cylinder: 1set
Sealing ring of safety valve: 1set
Battery Operated PIPE CRIMPING Tools
ITEM:EZ-1632
Model EZ-1632 Battery powered pipe crimping tools
Crimping force: 60KN
Stroke: 17mm
Crimp/change: 320times
Crimping cycle: 3s-6s
Voltage: 18v
Capacity: 3.0Ah
Charging time: 2hs
Packing: Steel case
ACCESSORIES CHOICE(used at optional):
Crimping die for SV type:Dia.16mm, 20mm, 25mm
Crimping die for H type: Dia.16mm, 20mm, 25mm, 32mm
Crimping die for TH type:Dia.16mm, 20mm, 26mm, 32mm
CrimpingToolsWireStripperCableCutterHydraulicToolsNetworkToolsPipeCutterCableTieToolsWireProcessingMachineHoseCrimpMachine