The document describes two stainless steel housings, NXW and NXM, for installing cameras in aggressive environments. The NXW housing is made of 316 stainless steel, has liquid cooling capabilities, and IP67 rating. The NXM housing is entirely made of 316 stainless steel, has a cylindrical body enclosed by thick flanges, IP68 rating for submersion up to 50 meters, and various accessory options. Both housings have nickel-plated brass cable glands for external connections.

1. STAINLESS STEEL SYSTEM
NXW
NXM
Liquid-cooled housing
Housing for installation in aggressive environments
• Made of AISI 316 stainless steel
• Steel cylindrical chamber for internal circulation of cooling liquid
linked to an external circuit
• IP67
• Two PG13,5 cable glands nickel-plated brass for external
connections
• Standard air barrier
• Available accessories: camera power supply, filter group, toughened
glass max temp. 290°C (554°F), VICOR glass max 1200°C (2192°F) or
IR proof glass max temp. 290°C (554°F)
• Entirely made of AISI 316 stainless steel
• Cylindrical body enclosed by two 9mm-thick circular flanges
• Two PG13,5 cable glands nickel-plated brass for external
connections
• IP68, submersible up to -50m (-130ft), equal to 5 BAR max pressure
• Accessories available: sunshield, heater kit and double power heater
(for temperature down to -40°C (-40°F), camera power supply, air
barrier + filtering group, wiper and washer
NXW + NXFIGRU + NXWBS1
18 STAINLESS STEEL SYSTEM
NXM + VIPNX + NXPTH + NXFWBT + NXWBPTH1