2. TECHNOLOGIES PVT. LTD.
Using Weiber Fingerprint Development Chamber, fingerprints can be detected with greater speed and
higher throughput with astonishing clarity. This testing chamber works by optimizing and accurately controlling
the conditions under which exhibits are developed. Test chamber is made of seam-welded aluminum coated
with high-quality, corrosion-resistant epoxy paint. It features rapid condition recovery after the chamber door is
opened and closed.
It is equipped with the microprocessor-based PID controllers which maintains excellent stability and provide
reliable and repeatable results. Finger Print Testing Chamber has a vertical airflow which maintains uniform
environmental condition,eliminates condensation, and keeps evidence moisture-free. The Fingerprint Testing
Chambers are designed specifically to enable the rapid detection of clear latent prints on porous surfaces
FINGER PRINT TEST CHAMBER
R
3. TECHNOLOGIES PVT. LTD.
where the sequential use of DFO and Ninhydrin processes are used. Chamber is designed by Weiber to
accelerate the DFO, Ninhydrin, and other fingerprint development processes. Weiber has developed this test
chamber to specifically meet requirements of the various research group, police and other agencies engaged
in criminal investigations. The chamber is vented at the top to allow vapors to escape to the outside or into a
fume hood.
TECHNICAL SPECIFICATIONS
R
SALIENT FEATURES
Ÿ High accuracy and speed
Ÿ Microprocessor-based PID controllers
Ÿ Accurate temperature control
Ÿ Solid door as standard
Ÿ Vertical airflow
Ÿ Portable
Ÿ Light weight
Ÿ High quality steam generator
Ÿ Digital countdown timer displays time remaining in test procedure.
Controller Microprocessor-based controller
Construction 304 Stainless Steel interior and exterior
Humidity range 20% - 96% RH
Max no. of shelves 19
Shelf area (each) 6 sq ft (0.5 sq M)
Temperature range 35ºC to 100°C
4. www.acmasindia.com | www.test-chambers.comwww.acmasglobal.com |
SALES OFFICE (HONG KONG)
SALES OFFICE (RUSSIA)
Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East,
Sheung Wan, Hong Kong (PRC)
Tel.: 0086-13929598046 | 0086- 18922303099
E-mail.: hk@acmasindia.com
Inmed Trade Street Ozerkovsky Embankment,
Unit No 50, Straine- 1, Off- 502, Moscow, Russia
E-mail.: info@acmasindia.com
Tel.: 0049- 79592345 | Email: russia@acmasindia.com
TECHNOLOGIES PVT. LTD.
An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485
WHO: GMP Products | GLP Compliant Products
CORPORATE OFFICE/ (INDIA)SHOWROOM
Plot No. 352-353, Sector – 57
Phase- IV Kundli, Sonepat, Haryana - 131028
Land Line No.: +91 - 11- 47619688,
Fax: +91-11-47619788
E-mail.: info@acmasindia.com
