Please review brochure if you looking to reduce your gas or electrical bill without replacement of the heating/cooling equipment.Call me at 416-628-3866 or email:wes@energybank.ca
2. Commercial Hot Water Heating System Light Commercial Hot Water Heating System Forced-Air Heating System
Fuel Economizer Fuel Economizer Fuel Economizer
The Intellidyne Difference
IntelliCon ®-CHW is a microprocessor-based fuel- IntelliCon®-LCH is a microprocessor-based, fuel- IntelliCon®-FA is a microprocessor-based,
• Unlike static control economizers, saving economizer for commercial hot-water (hydronic) saving economizer for light-commercial hot-water fuel-saving economizer for forced-air
Intellidyne economizers provide heating systems. IntelliCon-CHW reduces fuel (hydronic) heating systems. IntelliCon-LCH saves heating systems. IntelliCon-FA reduces:
“state-of-the-art” microprocessor- consumption, wear on parts, flue emissions and energy by adjusting the burner run pattern to match fuel consumption, wear and tear on parts,
based dynamic cycle management, electrical usage, when installed on any new or existing the system’s “heat load”, determined by a strap-on flue emissions and electrical usage, when
to achieve the maximum in system gas or oil burner. temperature sensor that monitors the boiler’s out-flow installed on any new or existing forced-air
efficiency and pollution reduction water temperature and the rate that the temperature furnace.
Low Average High
Savings Range:
• Economizers with illuminated LCD 10.9% 15.6% 27.9% changes.
displays show runtime savings, Low Average High
Savings Range:
runtime hours, economizing hours, 10.8% 17.5% 38.3%
operating temperatures, operating
modes and system diagnostics,
depending on the model Commercial Steam Heating System Light Commercial Steam Heating System
Fuel Economizer Fuel Economizer
• Increases savings without upgrading
or replacing your entire system IntelliCon®-CHS is a microprocessor-based, fuel- IntelliCon®-LCS is a microprocessor-based, fuel-
saving economizer for commercial steam heating saving economizer for light-commercial steam heating
• Reduces maintenance and
systems. IntelliCon-CHS saves energy by adjusting systems. IntelliCon-LCS saves energy by adjusting the
extends equipment life
the burner run pattern to match the system’s “heat burner run pattern to match the system’s “heat load”
• Has short payback period— load”, determined by using a pressure sensor that determined by using a pressure sensor that monitors
typically 1 to 2 heating seasons monitors the boiler’s steam-pressure and the rate that the boiler’s steam-pressure and the rate that the
• Reduces energy consumption the pressure changes. pressure changes.
10% to 20% Low Average High Low Average High
Savings Range: Savings Range:
10.2% 14.2% 19.9% — 10.0% — Low Average High
Savings Range:
— 10.6% —
180
Heat Exchanger Temperature in Degrees Fahrenheit
Maximum Heat Exchanger Temperature = 155° F Economizer Controls Burner
160
140
120
Burner Off
Burner On
Burner Off
Burner On
Burner Off
Burner On
FA Controls Burner
100
80
60
Thermostat Turns Example Thermostat
On Burner at 65° Turns Off
Savings: Burner
40
180 Seconds or at 70°
20 19.5%
330 390 540 600 740 800 920
Burner Heat Cycle in Seconds
Normal Burner Run Pattern Economizer Controlled Reduced Burner Run Time
Features The Intellidyne FA fuel economizer modifies
the normal burner run pattern, dynamically
• Simple installation by qualified
Commercial Air Conditioning Commercial Refrigeration adjusting the length and number of cycles.
installer
Electrical Consumption Economizer Electrical Consumption Economizer Shorter burner cycles providing the same heat
• No follow-up visits required after load reduces fuel consumption. This example
IntelliCon®-CAC is a microprocessor-based, UL listed, The IntelliCon®-RU when installed on commercial
installation shows a normal burner run pattern of 920
electronic economizer that automatically adjusts the refrigeration/freezer systems reduce electric consumption.
• Maximum year-round efficiency seconds. The three variable economizer burner
compressor cycles to achieve the greatest efficiency IntelliCon-RU is a major advancement in refrigeration
off corrections equal 180 seconds saved from
• 15-year replacement warranty for and reduced electrical usage, while assuring consistent system energy-saving technology that is easily installed
the 920 second normal burner run pattern.
manufacturing defects temperature levels. by a qualified installer, maintenance free and guaranteed
Dividing the 180 seconds saved by the normal
Low Average High
to save energy.
Savings Range: burner run pattern of 920 seconds equals
8.5% 14.6% 27.1% Low Average High
Savings Range: 19.5% or 0.195 in runtime saved.
9.9% 12.1% 18.4%