1. 1/7
CURRICULUM VITAE
PERSONAL DETAILS
Full name: Ing. Vladimír Palec
Date of Birth: 05.03.1983
Nationality: Slovak
Contact details
Company address:
Company email:
Personal phone
contact:
Personal email:
HIMA Paul Hildebrandt GmbH Albert-Bassermann-Str. 28
68782 Brühl, Germany
v.palec@hima.com
+421904317231
vladopal@gmail.com
EXPERIENCE
05/2015 – 08/2016
HIMA Germany
Bruhl
HW/SW LEAD ENGINEER in SINGAPORE
05/2015-present:
Singapore:
Ichthys Gas Field Development Project – Onshore - Safety
systems
Position:
HW Lead Engineer for Onshore project
SW Lead Engineer for Onshore project using HIMA Silworx program for
configuration and programing safety application.
Responsibilities included:
- Lead Engineer for HW/SW HIMA safety systems SIS/FGS/HIPPS (UTILITY,TRAIN
1,TRAIN 2,INLET,BOG,JETTY,OFFSITE,CIR,Remote IO) – roughly 28000 I/O
- coordination engineer and technicians
- network architecture
- FIT, IFAT, FAT for HW and SW
- Finalizing FIT, FAT and AS shipped documentation
- BMS(burn management system)
- ESD sequence for BDV
- COR(change order request)
- taking care about all material ordering, installation etc.
- fixing main technical HW and SW issue during this project
- implementation HW portion into real cabinets
- implementation SW portion into SilworX version 6+
- meetings with clients (INPEX, JGC, Chioda, Yokogawa)
- reporting
- scheduling
2. 2/7
09/2008 – 05/2015
HIMA Slovakia Ltd.,
Nitra, Slovakia
HW/SW LEAD ENGINEER
Responsibilities included:
- design specifications,
- technical documentation preparation,
- configuration of SCADA and HMI panel applications,
- configuration and installation of computers,
- installation, commissioning and testing of SCADA systems,
- customer training,
- maintenance of existing systems
12/2012-05/2015:
Singapore:
Ichthys Gas Field Development Project – Onshore - Safety
systems
Position:
HW Lead Engineer for Onshore project
SW Lead Engineer for Onshore project using HIMA Silworx program for
configuration and programing safety application.
Responsibilities included:
- Lead Engineer for HW/SW HIMA safety systems SIS/FGS/HIPPS (UTILITY,TRAIN
1,TRAIN 2,INLET,BOG,JETTY,OFFSITE,CIR,Remote IO) – roughly 28000 I/O
- coordination engineer and technicians
- network architecture
- FIT, IFAT, FAT for HW and SW
- Finalizing FIT, FAT and AS shipped documentation
- COR(change order request)
- taking care about all material ordering, installation etc.
- fixing main HW and SW issue during this project
- meetings with clients (INPEX, JGC, Chioda, Yokogawa)
- reporting
- scheduling
2012; CEPRO; control system product pipeline for pump station (Czech),
Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a pumping station located in Loukov.
My role: hardware and software engineering, commissioning
2012; CEPRO; watch signals on terminal station (Czech),
Programming and design tracking signals to PLC in terminal station
2012; HIMA; service reporting Kaykako
Create reporting system for Kayako
My role: VBA programming in MS access
2011; CEPRO Mstetice DN200 control system product pipeline for terminal
station (Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Mstetice.
My role: hardware and software engineering, commissioning
3. 3/7
2011, CEPRO Nove Mesto, reconstruction of the control system product
pipeline for pump station (Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a pumping station located in Nove Mesto.
My role: configuration and programming OP and PLC system.
2011; CEPRO; control system product pipeline for terminal station (Czech),
Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Nevid.
My role: hardware and software engineering, commissioning
2010; CEPRO, reconstruction of the control and security system pipelines
Cepro (Czech), Project engineer
Supply of instrumentation, PLC-based control system based on Schneider Electric
Twido PLC and block valve stations.
My role: installation and configuration of PLC and OP system, commissioning and
testing.
2010; MERO, Czech republic
Bilančný system -- Collecting data from measuring devices FLOBOSS to PLC,
editing data in reports to OPC server. It was the site Litvínov, CTR, Kralupy,
Klobouky, MND, Paramo
My role: hardware and software engineering, testing, commissioning
2010; CEPRO Cerekvice control system product pipeline for terminal station
(Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Cerekvice.
My role: hardware and software engineering, commissioning
2010; MERO, Czech republic
Project management for the control system revamping on International Fiscal
Metering Station, for Crude Oil pipeline operator, located in Klobouky (Czech
Republic). Project included supply of new Control logic solver dedicated to Metering
station data collection and data exchange mainly with customers business partner
Transpetrol, a.s. via redundant link and customers 3rd party system.
2009; CEPRO Strelice control system product pipeline for terminal station
(Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Strelice.
My role: hardware and software engineering, commissioning
2009; CEPRO Kralupy 581 control system product pipeline for terminal station
(Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Kralupy.
My role: hardware and software engineering, commissioning
2008; CEPRO Kralupy 580 control system product pipeline for terminal station
(Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Kralupy.
4. 4/7
My role: hardware and software engineering, commissioning
2008; CEPRO Dedibaby control system product pipeline for terminal station
(Czech), Project engineer
Supply of instrumentation and PLC-based control system based on Schneider
Electric Premium PLC for control of a terminal station located in Dedibaby.
My role: hardware and software engineering, commissioning
12/2007 – 9/2008
M & B Automation
Ltd.,
Bratislava, Slovakia
PROJECT ENGINNER
Responsibilities included:
- design specifications,
- technical documentation preparation,
- configuration of PLC and HMI panel applications,
- configuration and installation of computers,
- installation, commissioning and testing of control system,
- customer training,
- maintenance of existing systems
List of the projects:
5/2008 – 9/2008; HIMA Slovakia Ltd., Slovakia
CEPRO Mstetice control system product pipeline for terminal station (Czech),
Project engineer
Supply of instrumentation, process control system
My role: installation and configuration of PLC system, commissioning and testing.
MERO Klobouky
Logging data from sensor
My role: installation and configuration of DATA loger system, commissioning and
testing.
3/2008; Amsterdam, Holland
High heating furnaces
My role: configuration and programin SCADA using In Touch 10.0
2/2008; Atec Ltd., Bratislava, Slovakia
VW Bratislava
My role: programming OP using WinCC Flexible, configuration alarm list in OP
Sibert from Siemens.
1/2008; Noble International Ltd,Senica, Slovakia
the world's largest supplier of laser welded blanks (LWBs) and a leading supplier of
roll-formed and tubular products to the global automotive industry
My role: training and service technology
06/2007 – 11/2007
Systemcontrol Ltd.,
Bratislava, Slovakia
PROJECT ENGINNER
Responsibilities included:
- design specifications,
- technical documentation preparation,
- configuration of PLC and HMI panel applications,
- configuration and installation of computers,
- installation, commissioning and testing of control system,
- customer training,
5. 5/7
- maintenance of existing systems
List of the projects:
10/2007; Brusel, Belgium
Audi and VW factory
My role: supervising the production of cars
7/2007; Tuczno, Poland
Production of Fritz confectionery and bonboniere
My role: programming of the software for S7 300, visualization operator panels using
pro tool v6.0
06/2006 – 12/2006
ELT– Servis Ltd.,
Bratislava, Slovakia
PROJECT ENGINNER
Responsibilities included:
- design specifications,
- technical documentation preparation,
- configuration of PLC and HMI panel applications,
- configuration and installation of computers,
- installation, commissioning and testing of control system,
- customer training,
- - maintenance of existing systems
List of the projects:
11/2006; LOZORNO, Slovakia
Press the production of doors for cars
My role: programming of the software for S7 300, visualization operator panels
10/2006; Envigeo a.s. Žiar nad Hronom
Project using WinCC flexible visualization with S7 300 PLCs for process control.
My role: Programming control to production Bentonit using PLC S7 300 and
visualization in WinCC Flexible
8/2006; Nordzucker AG Trencianska Tepla, Slovakia
My role: Programing operator panels using WinCC flexible and configuration and
programming control to spin sugar using PLC S7 300
7/2006; NESTLE Prievidza, Slovakia
Mixers and transport system reconstruction. Project using WinCC flexible and S7
300 for process control.
My role: programming of the software for S7 300, visualization, calibration SIWAREX
, commissioning
06/2005 – 08/2006
KVT Ltd.,
Bratislava, Slovakia
Lecturer
Computer courses - MS Word, MS Excel, MS Access, MS PowerPoint
6. 6/7
ADDITIONAL INFORMATION
Education: 2001–2007 Slovak University of Technology, Bratislava, Slovakia, Faculty of
Electro technical Engineering, Department of Automation, subject field: Cybernetics,
Degree: M.Sc.
1997-2001 Gymnasium Radlinskeho, Banovce nad Bebravou
Other abilities: Scada:
CitectSCADA basic
WinCC (Siemens) basic
In Touch 10.0 basic
Visualisations:
WinCC Flexible
ProTool (Siemens)
RSView (A&B)
Aspic3.30
PLC programming:
Siemens (Step7),
Allen-Bradley (RS Logix 500/5000),
Schneider Electric (Unity Pro XL V7+, Twidosuit v2.2)
GE Fanuc(PME v6.0)
Safety systems:
HIMA HW(HIMAX,HIMATRIX, Plannar 4)
HIMA SW(Silworx V8+)
Programming languages:
C/C++
Visual Basic
HTML
T-SQL, MSSQL basic
Other software packages:
MS Office
OpenOffice
MS Windows
Unix/Linux,
Matlab,
MAC OS X
Driving license for motor vehicles, weight not exceeding 3 500 kg since
03/2001
Training:
03/2012 – MS SQL 2008/2005 T-SQL Training
01/2010 – Certificate of Electrical qualification, Level 22
08/2008 – Unity Pro XL training
10/2008 – CitectSCADA Basic Configuration Training, SCADA Servis Ltd.
08/2007 – programming robots KUKA in company Blumenbecker
08/2007 – programming of control systems Simatic S7 in company Siemens
7. 7/7
Languages: Slovak language – native
Czech language – native
English language – active
German language – pre-intermediate