The SUN-FI316 Optical Fiber Identifier is a handheld device that can identify single-mode optical fibers without damage by detecting optical signals. It displays the core power level and identifies frequency tones without interrupting fiber network services. It comes with interchangeable adapter heads that fit various fiber sizes and allows identification of fibers in both directions.
1. Fiber Optic Solutions 1/2
SUN-FI316 Optical Fiber Identifier
Figure-1 Optical Fiber Identifier (SUN-FI316)
SUN Telecom’s SUN-FI316 Optical Fiber Identifier is an essential installation and maintenance
instrument.
By inserting the fiber into its adapter head, SUN-FI316 Optical Fiber Identifier can identify SM optical
fibers without any damage by detecting the optical signals being transmitted through them so as to avoid
the opening of the fiber at the splice point for identification and thus avoids the interruption of the service.
In the presence of traffic, the intermittently audible tone is activated. The SUN-FI316 Optical Fiber
Identifier also allows relative core power display and identification of the 270Hz, 1 kHz and 2 kHz
frequencies. When they are used to detect the frequency, the continuously audible tone is activated.
There are four types of adapter heads available: 0.25mm, 0.9mm, 2.0mm, and 3.0mm.
Applications:
Maintenance in Telecom
Maintenance CATV
Test Lab of optical fibers
Other Fiber Optic Measurements
Features:
Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) without any
damage of the fibers
Displays the core power of the fibers (-50~+0dBm)
Low bending loss and highly efficient output
Easy-to-replace adaptors (0.25mm, 0.9mm, 2.0mm, 3.0mm to match various optical cables)
Mechanical damp design of adapter heads to ensure the fiber without damage
www.suntelecommunication.cn • +86-21-54481280 • sales@suntelecommunication.cn
2. Fiber Optic Solutions 2/2
KEY operation design, easy-to-sue
Specifications:
Parameters Specifications
Identified Wavelength Range (nm) 800-1700
Identified Signal Type CW, 270Hz±5%
Detector Type Ø1mm InGaAs 2PCs
Ø 0.25 (Applicable for Bare Fiber)
Ø 0.9 (Applicable for Ø 0.9 Cable)
Adaptor Type
Ø 2.0 (Applicable for Ø 2.0 Cable)
Ø 3.0 (Applicable for Ø 3.0 Cable)
Signal Direction Left & Right LED
Optical Power Reading (dBm) -50~+0
Signal Frequency (Hz) 270, 1K, 2k
Power Supply One 9V Alkaline Battery
Sensitivity (dB) -50
Relative Humidity 0 to 90%
Allowable Attenuation ≤1dB
Operating Temperature (°C) -10~+60
Storage Temperature (°C) -25~+70
Dimensions (mm) 195 x 30x 27
Weight (g) 235
Standard Package:
Model Contents QTY Unit
SUN-FI316 Optical Fiber Identifier 1 Piece
Adaptors Heads 4 Piece
SUN-FI316 Alkaline Battery 1 Piece
Instruction Manual 1 Copy
Cotton Tampon and Soft Carrying Case 1 Set
Note: For the necessity of improvement, the material contained in this document is subject to change without notice.
www.suntelecommunication.cn • +86-21-54481280 • sales@suntelecommunication.cn