Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Upcoming SlideShare
Infantry power pack Final Report May 13
Next
Download to read offline and view in fullscreen.

0

Share

Download to read offline

FOT Catalog 2016

Download to read offline

Related Audiobooks

Free with a 30 day trial from Scribd

See all
  • Be the first to like this

FOT Catalog 2016

  1. 1. Fibra Opticas Tek Product Catalog (2016) Expert on Test& Measurement Passive Components
  2. 2. - 1 - Optical Fiber Fusion Splicer---------AV6471 Updated Version AV6471 Optical Fiber Fusion Splicer adopts a brand new design. Its powerful function and super low splicing loss fully satisfies the requirements for fiber splicing of backbone and FTTX. Its environmental adaptability is good since its lightweight body and exquisite design. With new fiber imagery system and digital design, image display is more delicate and clearer. Real-time embedded operation system provides user-friendly operation interface and more useful functions. Built-in large capacity Li-on battery supports long time operation in the field. Real-time match system for temperature, humidity and air pressure makes it flexibly adapt the changing environment and obtain low insertion loss after splicing in harsh environment. Features: -Updated Ceramic V-groove, more precisely locate; -Elastic fiber holder to fit flat drop cable and pigtail; -Lightweight and 5.7 inch high definition LCD digital monitor; - High efficiency: 8 seconds for splicing and 25 seconds for heat shrinking; -Automatically splicing after closing shield, automatically heating after closing heating cover; -Display X/Y axis meanwhile, magnification up to 304 times -Real time calibrating system -Built-in high capacity Li-on battery, supports 220 times splicing and heating Specification: Parameters Specifications Align Mode Advanced Profile Alignment (PAS) Operation Mode Auto, Half and Manual Fiber Types Singe Mode (ITU-T G.652) Multimode (ITU-T G.651) Dispersion shifted (ITU-T G.653) Non-zero dispersion shifted (ITU-T G.655) Average Splicing Loss SM: 0.02dB MM: 0.01dB DS & NZDS: 0.04dB Return Loss (dB) ≥60dB Fiber Diameter Cladding diameter: 80µm~150µm, Coating diameter: 100µm~1000µm Fiber Cleave Length 8~16mm (coating diameter < 250µm) 16mm (coating diameter 250 ~ 1000µm) Splicing Time (s) 8s (Typical Splicing Time) Heating Time (s) 30s (Typical Heating Time) Data Transmission USB & VGA Heat-Shrinkable Tube 40mm, 60mm and a series of micro Heat-Shrinkable Tubing Magnification Vertical 152 times, horizontal 304 times. Screen Display 5.7 inch, 640*480 LCD. Backlight Built-in super High-brightness LED supply convenience for night work General Specification
  3. 3. - 2 - Power Supply Built in 11.1V Li-on Battery with AC Adaptor Alternating Current: 100~240V,50/60Hz, 30mW; Direct Current: 13.5V/4.5A Battery capacity Support 200 times splicing and heating on one charge (3.5hrs) Battery Lifetime Cycle life up to 300~ 500 times, replaceable. Electrode Lifetime >4000 times, replaceable Tension Test (N) 2N Operating Temp. (℃) -10℃~50℃ Relative Humidity 0~95%(40℃, non considering ) Work Altitude 0~5000m Weight (Kg) 2.3kg(Without battery), 2.8kg(with battery) Dimensions (mm) 160(L)×150(W)×140(H) (mm) Packing List Item Name 1 Fusion Splicer 2 Fiber Cleaver 3 AC Power Adapter 4 AC Power Cord 5 Spare Electrode 6 Cooling Tray 7 Alcohol Pump Bottle 8 Blower Brush 9 CFS-2 Fiber Optic Stripper 10 User’s Manual (CD) 11 Carrying Case
  4. 4. - 3 - FTTH Optical Fiber Fusion Splicer---------AV6471A AV6471A FTTH Fiber Optic Fusion Splicer adopts a brand new design for FTTH Drop cable and patch cord. Its lightweight body and exquisite design makes it easy to use even under a confined space. With new fiber imagery system and digital design, image display is more delicate and clearer. Real-time embedded operation system provides user-friendly operation interface and more useful functions. Built-in large capacity Li-on battery supports long time operation in the field. Real-time match system for temperature, humidity and air pressure makes it flexibly adapt the changing environment and obtain low insertion loss after splicing in harsh environment. Features: -Especial applicable for FTTH drops cable and patch cord. - Precising optical fiber core alignment system - Lightweight and 5.7 inch high definition LCD digital monitor; - High efficiency: 8 seconds for splicing and 25 seconds for heat shrinking; - Automatically splicing after closing shield, automatically heating after closing heating cover; - Display X/Y axis meanwhile, magnification up to 304 times - Real time ARC calibrating system - Built-in high capacity Li-on battery, supports 220 times splicing and heating. Specification Parameters Specification Align Mode Advanced Profile Alignment (PAS) Operation Mode Auto, Half-auto and Manual Fiber Types Singe Mode (ITU-T G.652) Multimode (ITU-T G.651) Dispersion shifted (ITU-T G.653) Non-zero dispersion shifted (ITU-T G.655) Average Splicing Loss SM: 0.02dB MM: 0.01dB DS & NZDS: 0.04dB Return Loss (dB) ≥60dB Fiber Diameter 250um bare fiber 900um optical cable 3.0mm FTTH Drop Cable; SC/FC Connector Fiber Cleave Length 8~16mm (coating diameter < 250 祄) Splicing Time (s) 8s (Typical Splicing Time) Heating Time (s) 30s (Typical Heating Time) Data Transmission USB & VGA Heat-Shrinkable Tube 40mm, 60mm and a series of micro Heat-Shrinkable Tubing Magnification Vertical 152 times, horizontal 304 times. Screen Display 5.7 inch, 640*480 LCD. Backlight Built-in super High-brightness LED supply convenience for night work General Specification Power Supply Built in 11.1V Li-on Battery with AC Adaptor
  5. 5. - 4 - Alternating Current: 100~240V,50/60Hz, 30mW; Direct Current: 13.5V/4.5A Battery Life Support 220 times splicing and heating on one charge (3.5hrs) Battery Lifetime Cycle life up to 300~ 500 times, replaceable. Electrode Lifetime >4000 times, replaceable Tension Test (N) 2N Operating Temp. (℃) -10℃~50℃ Relative Humidity 0~95%(40℃, non considering ) Work Altitude 0~5000m Weight (Kg) 2.3kg(Without battery), 2.8kg(with battery) Dimensions (mm) 160(L)X50(W)X40(H) (mm) Packing List Item Name Quantity 1 Fusion Splicer 1 Set 2 Fiber Cleaver 1 PC 3 Fiber Holder FH-1000A-IN(for single fiber) 1 Pair 4 Fiber Holder FH-1000A-250(for drop cable) 1 Pair 5 Fiber Holder FH-1000A-3.0-R(for patch cord) 1 PC 6 AC Power Adapter 1 PC 7 AC Power Cord 1 PC 8 Spare Electrode 1 Pair 9 Heating Pad 1 PC 10 Cooling Tray 1 PC 11 Alcohol Pump Bottle 1 PC 12 Blower Brush 1 PC 13 Drop Cable Stripper 1 PC 14 CFS-2 Fiber Optic Stripper 1 PC 15 User’s Manual (CD) 1 PC 16 Carrying Case 1 PC 17 SC Connector Holder FH-1000A-SC-R(Optional) 1 PC
  6. 6. - 5 - Palm OTDR---------FOT3302B FOT3302B hand held OTDR is mainly used to measure the parameters of optical fibers and cables, such as length, loss, and connection quality, etc.; it can realize the accurate positioning of event points and fault points, and can be widely used in the construction, maintenance testing and emergency repair of the optical fiber communication systems as well as the research, production and production measurement of optical fibers and cables and so on. This product can provide you with the highest performance of solutions for installation and construction of fiber optic network construction and the subsequent fast and efficient maintenance and troubleshooting testing. Features --The industry's most convenient and easy operation mode; - Optimization of the test parameters, simplifying the user tedious setup process. - Short event dead zone, makes it easy to test fiber patch cord; - With automatic testing, manual testing and other test modes; - optical traffic detection and alarm function, to avoid damage to the device; - Built-in VFL (≥5km); - USB interface for fast file transfer; - Replaceable connectors: FC/ST/SC(APC or UPC); - Highly intelligent analysis software can accurately identify the failed splices, connectors or even macro bending; The industry's most simple and intuitive operation mode FOT3302B OTDR has the most simple user interface, easy and intuitive style. The optimized interface has only six operation menu, operation is very simple. Even without professional training ,users can easily learn how to use. Convenient one-click analysis FOT3302B series OTDR provides a separated shortcut trace analysis, can quickly and accurately find out the point of failure and event , in the form of event table lists all the event information. Excellent Testing Performance
  7. 7. - 6 - With extra-short dead zone and big dynamic range, FOT3302B can easily test fiber patch cord and test hundreds of kilometers of long-distance link . Efficient and flexible simulation software The intelligent simulation software can analyze and edit the testing data saved by the OTDR easily and quickly. Specification Model FOT3302B Type of optical fiber Single –mode Center wavelength 1310nm/1550nm ±20nm Maximum dynamic range (dB) ○1 30/28 Event blind zone ○2 1.5m Attenuation blind zone 10m Display type 3.5inch, color LCD, touch screen operation Optical interface FC/UPC (Interchangeable SC, ST) Test range (dB) 500m,1km,2km,4km,8km 16km,32km,64km,128km Pulse width 10,30,50,100,275 500,1000,5000,10000ns Range accuracy ± (1m + sampling interval +0.005% × distance) Attenuation measurement accuracy ±0.05 dB/dB Reflection measurement accuracy ±4dB Data storage ≥ 1000 test traces Communication interface USB VFL Output power ≥2mW Test distance ≥5 km Environmental adaptability Power supply mode AC / DC adapter: AC: 100V ~ 240V (1.5A), 50/60Hz DC: 18V to 20V (2A) Internal lithium-ion battery pack: 7.4V,
  8. 8. - 7 - 4400mAh Battery operation time ○3 ≥ 10hours Operating temperature -5℃ ~ 50℃ Storage temperature -20℃ ~ 70℃ Relative humidity 0 ~ 95%, no condensation Weight ≤ 1kg Volume 208mm × 110mm × 56mm Standard Package OTDR 1 unit User’s manual 1 pc AD/DC adapter 1 pc Carrying bag 1 pc Certificate 1 pc USB Disk(including the analysis software) 1 pc Power cord 1 pc Stylus pen 1 pc
  9. 9. - 8 - PON OTDR---------AV6418 AV6418 series’ OTDR is designed for FTTx network testing, with high performance and multifunction. It is featured with short event dead zone, fast test and analysis speed,AV6418 is an ideal access and FTTH network testing equipment, supports PON testing via 1×32, 1×64 splitter. 1m extra short dead zone and 0.05m high distance resolution makes AV6418 possible to analyze all events between the transmitter and central office. Features: - Handheld, lightweight and convenience for carrying. - Advanced anti-reflective TFT LCD screen - 1m extra-short event dead zone - Fast auto measurement, one-button operating - 42dB high dynamic range, 0.05m high resolution, 128ksampling points - Fast auto measurement, one-button operating - Automatically monitoring communication signal. - Dual USB interface, supporting USB stick, printer and direct cable download to PC via ActiveSync - Supporting Bellcore GR196 file format in writing or reading - WinCE operation system - Built-in high capacity Li-on battery supports 8 hours working. - Universal FC/PC, FC/SC, FC/ST connector type. Specification: OTDR Module Central Wavelength(nm) Fiber Type Dynamic Range1(dB) Event Dead Zone2(m) AV6418-2101 1310/1550nm SM 42/40 2/2 AV6418-3103 1310/1550/1625nm (with Filter) SM 39/37/37 1/1/1 Measuring Mode Manual mode (including real time mode and average mode), Auto mode and Dead Zone Mode. Distance Measurement Accuracy ±(1m + sampling interval + 0.003% × distance) (Refractive error are not included) Sample Resolution (m) 0.05, 0.1, 0.2, 0.5, 1,2, 4, 8,16 (m) Distance measurement range (KM) 0.4, 0.8, 1.6, 3.2,6.4, 16, 32, 64, 128, 256, 512km(Single Mode) 0.4, 0.8, 1.6, 3.2,6.4, 16, 32 (MM, 850nm) Pulse widths (nominal) 5, 10, 30, 80, 160, 320, 640, 1280, 5120, 10240, 20480ns 5, 10, 30, 80, 160, 320, 640, 1280 (MM, 850nm) Loss threshold (dB) 0.01dB Loss Resolution(dB) 0.01dB Sampling Points 128k Linearity 0.05dB/dB Memory Capacity ≥800 traces (device memory); ≥65500 trace (present with 2G SD card) IOR Setting 1.00000~2.00000 Unit of Measurement Kilometer; meter, Mille feet and feet
  10. 10. - 9 - Distance Screen Display 6.5inch, 640×480 colorful TFT LCD Touch Screen Data Transmission USB, Min-USB, Ethernet, Earphone and SD. Optical Interface FC/UPC, SC/ST is available General Specification Power Supply AC/DC Adapter: Alternating Current: 100~240V, 1.5A,50/60Hz; Direct Current: 19V±2V(2A) Battery Built in 14.8VLi-on Battery Battery Life Supports 8 hrs Operating Temp. (℃) -10℃~50℃ (Battery under charging: 5℃~40℃) Storage Temp. (℃) -40℃~70℃ (without battery); -20℃~60℃ (with battery) Relative Humidity 5~95%( non considering ) Weight (Kg) 3kg Dimensions (mm) 295mm×186mm×75mm Packing list Name Quantity AV6418 OTDR 01 unit AC/DC Adapter 1 PC Power Cord 1 PC User Manual 1 PC CD 1PC Connectors (SC, ST) 2 PC Carrying Case 1 PC
  11. 11. - 10 - Hand held Optical Power Meter---------FOT3216 Series FOT3216 Handheld Optical Power Meter is FOT newly designed fiber optic tester, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with FOT3116 handheld optical light source, it offers a quick and accurate testing solution on both SM and MM fibers. Compared with usual power meters, the FOT3216 has more great functions/features of automatic wavelength identification and switching and intelligent backlight control. Also the FOT3216 features good appearance, good touch feeling and considerate humanity design. Features * Wave ID—Automatic wavelength identification and switching (when used with FOT3116 handheld light source) * Frequency ID/Tone detection---Automatic frequency identification *Intelligent backlight control (light intensity can be adjusted properly according to ambient light, which greatly reduced power consumption) * Data storage function, up to 1000 test records * USB communication port for saved testing records download * Reference power level can be set up and stored * User self calibration function * Auto-off function can be activated or deactivated. * AA alkaline and AC adapter for power supply * Low battery indication Specifications Model FOT3216A FOT3216C Calibrated(nm)wavelength 850, 1300,1310,1490,1550,1625 Detector type InGaAs Measurement Range(dBm) -70~+6 -50~+26 Uncertainty (dB) ±0.15(3.5%) linearity (dB) ±0.02 Display resolution(dB) 0.01 Frequency ID(Hz) 270,330,1K,2K Wave ID(nm) 1310,1490,1550,1625 Date storage capacity 1000 Communication Port USB Optical Connector type FC,SC,ST interchangeable Alkaline battery 3*AA,1.5V Power Supply Adaptor(V) 8.4 Battery Operating time (h) 200 Operation Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Outline size(mm)/weight 180*90*45(250g) Standard Packages MODEL INCLUDES All FOT3216 Models FOT3216 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs and Soft carrying case.
  12. 12. - 11 - Optical Power Meter---------FOT3211 Series FOT3211 optical power meter Is a handheld optical power meter, newly released in 2015, which can be used for absolute optical power measurements as well as for relative loss measurements in optic fiber networks. An Ø1.0mm photosensitive area photodiode is used to significantly improve the stability and the reliability. It features ingenious appearance, wide range of power measurement, high accuracy, user self-calibration function and reference power level storage. Features * Wide dynamic measurement range (up to 80dB) * Reference power level storage(Ref Setting) *User self-calibration function *Comfortable LCD display and backlight LCD display supports night operation. * Power measurements in dBm or mw and insertion loss in dB *10 minutes Auto-off function can be activated or deactivated. * AA alkaline batteries can last more than 140 hours, AC adaptor also available * Low battery indication Applications Telecom Maintenance CATV Maintenance Fiber Optic lab testing Other Fiber Optic Measurements Specifications MODEL FOT3211A FOT3211C Wavelength(nm) 800~1700nm Detector Type InGaAs Detector Size Ø 1.0mm Measurement Range (dBm) -70~+10 -50~+30 Uncertainty ±5% Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal Power Supply Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V) Battery Operating Time 140 h with 1.5V Battery(3pcs) Operating Temperature(℃) -10 ~ +60 Storage Temperature(℃) -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 190X100X50 Weight(g) 370 Standard Packages MODEL INCLUDES All FOT3211 Models FOT3211 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs and Soft carrying case.
  13. 13. - 12 - Optical Power Meter---------FOT3208 Series FOT3208 hand held optical power meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. It features ingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with high performance-to-price ratio. Features *User self calibration function *Comfortable LCD display and optional back light LCD display supports night operation *Power measurements in dBm or mw and insertion loss in dB *Low battery consumption, more than 240 hours continual operation time for three 1.5V alkaline batteries *10 minutes Auto-off function can be activated or deactivated. Applications Maintenance in Telecom Maintenance CATV Fiber Optic Lab Testing Other Fiber Optic Measurements Specifications Type FOT3208A FOT3208C Wavelength(nm) 800~1700nm Detector InGaAs Measurement Range (dBm) -70~+3 -50~+26 Uncertainty ±5% Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal Power Supply Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time 240 h with 1.5V Battery(3) Operating Temperature(℃) -10 ~ +60 Storage Temperature(℃) -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 175x82x33 Weight(g) 310 Standard Packages MODEL INCLUDES All FOT3208 Models FOT3208 Optical Power Meter, Protective Rubber Boot, 3pcs 1.5V batteries, User Manual, Cotton swabs and Soft carrying case.
  14. 14. - 13 - Optical Power Meter---------FOT3205 Series FOT3205 mini handheld optical power meter is the most lightweight and compact in size testing instrument. It features ease-of-use and economy advantages and can be used for absolute power measurement in optical fibers. FOT3205 in combination with the FOT3110 mini handheld light source become the most portable and advantageous testing pair. Features *The most compact in size, ideal for field operation *Power measurements in dBm and mw. *10 minutes Auto-off function conserving battery life Applications Maintenance in Telecom Maintenance CATV Fiber Optic Lab Testing Other Fiber Optic Measurements Specifications Type FOT3205A FOT3205C Wavelength(nm) 800~1700nm Detector InGaAs Measurement Range (dBm) -70~+6 -50~+26 Uncertainty ±5% Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal Power Supply Alkaline Battery Battery Operating Time 360 hours with three 1.5V batteries Operating Temperature(℃) -10 ~ +60 Storage Temperature(℃) -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 115X60X20 Weight(g) 105 Standard Packages MODEL INCLUDES All FOT3205 Models FOT3205 Optical Power Meter, Alkaline battery, Instruction Manual, Cotton swabs and Protective Holster.
  15. 15. - 14 - PON Optical Power Meter—FOT3213 series FOT3213 Series PON Optical Power Meter target at the FTTx application and maintenance. This power meter is able to simultaneously test and estimate the signals of the voice, data and video. It is an essential and ideal tool for the construction and maintenance of the PON projects. Features: * It can experiment at Voice, data and video signal synchronous measurement and display on BPON/EPON/GPON. * Providing simultaneous measurement for all three wavelengths on the fiber (1490nm, 1550nm,1310nm). * Used in Burst mode measurement of 1310nm upstream. * Use the software connect with PC, setting the threshold, data transfer, and calibration the wavelength. * USB communication port enables data transfer to a PC.1000measurement items can be saved in 3213 PON power meter or computer for data review. * With optical power meter modual, include 850、1300、1310、1490、1550、 1625sixs( 3213AP,3213A without 850nm wavelength);With visual fault locator modual(3213and3213AV) * Optical power meter and VFL with one port.(only 3213A) * Optional Chinese/English display. * Offers up to 10 different threshold sets in total,Three status LEDs represent different optical signal conditions of Pass, Warn and Fail respectively. * 10 minutes Auto-off function can be activated or deactivated * Good key design,high sensitivity, greatly reducing the volume and weight of the tester. * Different models corresponding to different function, according to own use to choose . Specifications: PON module: FOT3213 FOT3213A FOT3213AV FOT3213AP 1310 upstream measurement Pass Zone(nm) 1260nm~1360nm MeasurementRange(dBm) -40dBm~+10dBm Output power(max) 15dBm Isolation@1490/1550(dB) >40dB Burst mode measurement error <±0.5dB 1490 downstream measurement Pass Zone(nm) 1470nm~1505nm MeasurementRange(dBm) -40dBm~+12dBm Output power(max) 15dBm Isolation@1310/1550(dB) >40dB 1550 downstream measurement Pass Zone(nm) 1535nm~1570nm MeasurementRange(dBm) -40dBm~+20dBm Output power(max) 25dBm Isolation@(1310/1490nm) >40dB
  16. 16. - 15 - Measurement Accuracy Connatural uncertainty(dB) ±0.5dB Linearity(dB) ±0.1dB Passing through insertion Loss(dB) <1.5dB General Information Detector Type InGaAs Optical Connector FC/SC/ST Interchangeable/2.5 universal adapter Fiber Type SM 9/125um Measurement Unit dB/dBm/xW Resolution (dB) 0.01dB Operation Voltage(V) DC 3.3V~5.5V Power Supply 3pc1.5V battery Continuously Operation time (h) PON: 90h PON:90h OPM:100h VFL:50h PON:90h VFL:50h PON:90h OPM:100h Operation Temperature(℃) -10℃~60℃ Storage temperature(℃) -25℃~70℃ Weight(kg) 423g 425g 424g 424g Note: The operation time of the battery are all for the instrument that do not turn on back light, if the back light turn on the operation time will be shorted. Normal Optical Power Meter Module: Normal Optical Power Meter FOT3213 ② FOT3213A FOT3213AP Measurement Accuracy Connatural uncertainty(dB) None ±0.5dB Linearity(dB) ±0.1dB Measurement Range(dBm) -70dBm~+6dBm General Information Measurement Unit None dB/dBm Resolution (dB) 0.01dB Calibration Wavelength(nm) 1300/1310/ 1490/1550/1625 850/1300/1310/ 1490/1550/1625 Detector Type InGaAs Optical Connector FC/SC/ST Interchangeable/2.5 universal adapter ②:FOT3213do not have the OPM module
  17. 17. - 16 - VFL Module: VFL FOT3213○③ FOT3213A FOT3213AV Output power None >0.5mW Wavelength 650nm Optical Connector FC/SC/STInterchangeable/2.5 universal adapter Fiber Type SM/MM ③:FOT3213 without VFL module. Standard Packages: Model 3213 Series PON Optical Power Meter Items Title Quantity 1 FOT3213 tester 1unit 2 User Manual 1pc 3 USB 1pc 4 Soft CD 1pc 5 1.5VAA Battery 3pc
  18. 18. - 17 - FOT3214 Optical Power Meter FOT3214 , hand held and self-calibrated optical power meter is designed for the installation, operation and maintenance of a fiber-optic network.It is a precise, durable and convenient portable test instrument. With a smart appearance, optional backlight display, auto-off function, wide optical power test range, accurate testing accuracy and a new self-calibration function and universal user interface design. Features New user self-calibration function Extraordinary battery life Unique universal interface design Fast response,no warm-up The optional automatic shutdown FC/SC/ST and other common interface, without complicated conversion Linear(mW) and Nonlinear(dBm) at the same time indication Using a common AA batteries for up to 240 hours of continuous working time optional background light display switch Specification Model FOT3214A FOT3214C Wavelength(nm) 800~1700 Detector InGaAs Measurement Range(dBm) -70~+6 -50~+26 Uncertainty ±5% Calibrated Wavelength(nm) 850、980、1300、1310、1490、1550 Resolution linearity:0.1% /0.01dBm Working Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Auto-off(min) 10 Battery operation time(h) 240 Dimension(mm) 175×82×33 Power supply 3 pcs of AA 1.5V battery Weight(g) 310
  19. 19. - 18 - CWDM Power Meter----------FOT3226 Series FOT3226 CWDM Power Meter is a handy measuring which is specially designed for CWDM system, covers wavelength from 1470-1610nm. It can measure and monitor optical power and attenuation value at the calibrated wavelengths of 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm . Testing at all calibrated wavelengths will be performed simultaneously and all testing results will be showed in the LCD display. FOT3226 CWDM power meter features simple operation and quick response, which greatly improves the testing efficiency. Its high accuracy measurement and easy-to-use design becomes an ideal tester in CWDM system testing and CWDM installation and maintenance. Key Features CWDM System testing special purpose. Test at all calibrated wavelength performed & showed simultaneously 500 items storage & upload by USB . Specification Model FOT3226 CWDM Power meter Pass band(nm) 20 Wavelength range(nm) 1470-1610 Calibrated wavelength(nm) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Optical Power Range(dBm) -50-+3 Uncertainty(dB) ±0.4 Resolution 0.01 Data Storage 500 sets Communication Port USB Auto Power-off (min) 10 minutes Power supply adaptor 8.4V Operation temperature -10~60°C Operation Time 120 hours Storage temperature -25~70°C Packing & Delivery: G.W. 420g Packing sizes 180mm(L)*90mm(W)*36.5mm(H)
  20. 20. - 19 - CATV Power Meter----------FOT3227 Series FOT3227 is a hand held optical power meter and RF detector designed for installation, operation and maintenance of optical fiber communication network. This product has a neat appearance, switch selectable backlit display, automatic shutdown function, super wide optical power test range, accurate testing accuracy. Through investigation CATV fiber link optical power and RF carrier signal the presence or absence can be quickly and easily help construction, to quickly identify the type of fault. Features Direct detection signal with or without in the CATV optical link. Integrated optical power meter. Specification Model FOT3227 Wavelength range(nm) 800-1700 Detector type InGaAs Calibrated wavelength(nm) 850, 1300, 1310,1490, 1550,1625 Optical Power Range(dBm) -70~3 Uncertainty(dB) ±5% Resolution 0.01 CATV RF Frequency ID(Hz) 40~900Mhz Auto Power-off (min) 10 minutes Operation temperature -10~60°C Operation Time 140 hours Storage temperature -25~70°C G.W. 320g(without battery) Packing sizes 185mm(L)*84mm(W)*48mm(H)
  21. 21. - 20 - Plastic Power Meter----------FOT3233 Series FOT3233 hand-held POF power meter can be used for testing plastic optical fiber within 600-1000nm wavelength range in unit of w, dBm . With high resolution display . It has 635nm, 650nm, 780nm, 850nm, 980nm wavelength five calibration points .It can display power in linearity or non-linearity, can be used to short-wavelength optical power measurements. Features -Suitable for single-mode, multimode, plastic or large core fiber; - 2 buttons to control all the necessary functions - A large area silicon detectors - Multiple Wavelength Calibration Specification Model FOT3233A FOT3233C Wavelength(nm) 600~1000 Detector 3.6*3.6 large area of Si detector Measurement Range(dBm) +10~-70 +26~-50 Connector Φ3.8 universal、Φ2.5 universal、FC/SC Uncertainty ±5% Linearity(dB) 0.1% Calibrated Wavelength(nm) 635,650,780,850,980 Logarithm 0.01dBm Resolution 0.05 Working Temperature(℃) -10~+40 Storage Temperature(℃) -25~+70 Auto-off(min) 10 Battery Operating Time(h) 60 Dimension(mm) 150X74X26 Power Supply 3 pcs of AAA 1.5V battery Weight(g) 200
  22. 22. - 21 - FOT3223 VFL&OPM Features * Power meter and VFL integrated in one unit, this tester allows to perform both optical power/loss measurements and Fiber faults tracing visually. * OPEM3223 VFL Power Meter is an ideal tester used in quickly mechanical splicing and FTTx networks. * Optical Port: FC, SC interchangeable supports various optical connectors. Specifications Model FOT3223 Operating wavelength(Power Meter Module) 1310, 1490, 1550, 850, 1300, 1625 Detector Type InGaAs Out put power(VFL module) 1mW or 10mW Power Measurement Range -70~+3dBm / -50~+26dBm Uncertainty ±0.5dB Resolution 0.01 Operation temperature -10~+60 ℃ Storage Temperature -25~+70℃ Auto-off function Yes, Auto-off after 10minutes idle time Battery Life @ OPM 180 hours Battery Life @ VFL 60 hours Power Supply 3pcs AA Batteries Weight 700g (including batteries) Size 192*102*50 Standard Packages MODEL INCLUDES All FOT3223 Models VFL Power Meter, 3pcs alkaline batteries, User Manualand Soft carrying case. With FC, SC, interchangeable adaptor
  23. 23. - 22 - Hand held Adjustable Light Source---------FOT3116 Series FOT3116 Hand held Adjustable Light Source is FOT newly designed fiber optic tester, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with FOT3216 hand held optical power meter, it offers a quick and accurate testing solution on both SM and MM fibers. The FOT3116 provides 1 to 4 wavelengths and output power can be adjustable on customer requests. Also the FOT3116 features good appearance, good touch feeling and considerate humanity design. Features * Wave ID information can be transmitted when used with FOT3216 Optical Power Meter. * Tone generation, 270HZ,330HZ,1KHZ,2KHZ * Output power can be adjustable * Output power value is shown on LCD display * Intelligent back light control (light intensity can be adjusted properly according to ambient light, which greatly reduced power consumption) * AA alkaline and AC adapter for power supply * Low battery indication Specifications Model FOT3116 Operating wavelength(nm) 1310/1550;1310/1490/1550/1625(others specify on requests) Applicable fiber SM,MM Laser type FP-LD(others specify on requests) Output Power(dBm) -5~-12dBm (can be adjustable) Adjustable step size(dBm) <0.5 Stability(dB,30min,20℃) 0.15 Modulation(Hz) CW, 270,330,1K,2K Fiber Port FC/PC Alkaline Battery 3*AA,1.5V Power Supply Adaptor(V) 8.4 Battery Operating time(h) 45 Operation Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Outline size(mm)/weight 180*90*45(250g) Standard Package MODEL INCLUDES All FOT3116 Models FOT3116 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual and Soft carrying case.
  24. 24. - 23 - Optical Light Source---------FOT3111 Series FOT3111 optical light source is a handheld optical light source, newly released in 2007. It can provide 1 to 5 wavelengths output to satisfy specific requirements including the 650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer’s needs. Together with the FOT3211 optical power meter, it is a perfect solution for fiber optic network applications. Features * Provides 1~5 wavelengths output which can be optional according to customers’ needs * CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz modulation output at other wavelengths. * High stability of the output power * Stable output wavelength * Backlight LCD display supports night operation * Low battery power indication Applications Maintenance in Telecom Maintenance CATV Fiber Optic Lab Testing Other Fiber Optic Measurements Specifications Type FOT3111 Wavelengths(nm) Provides 1~6 Wavelengths according to needs. Emitter Type FP-LD,LED Typical Output Power(dBm) 0@650nm / -7 @1310nm,1550nm, -20dBm for LED Spectral Width(nm) ≤10 Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours Modulation Frequencies CW.2Hz@650nm / CW,270Hz,1KHz,2KHz@1310nm,1550nm CW,270Hz,1KHz,2KHzOptical Connector FC/PC(Other type adapters can be required) Power Supply Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V) Battery Operating Time(hour) 45 Operating Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Dimension(mm) 190X100X50 Weight(g) 370 FOT Recommendation FOT3111 Handheld Light Source is designed for optimal use with FOT3211 Optical Power Meter for measuring optical loss on both single mode and multimode fiber cable. Standard Package MODEL INCLUDES All FOT3111 Models FOT3111 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual and Soft carrying case.
  25. 25. - 24 - CWDM Light Source---------FOT3122 Series FOT3122 is the FOT Company-launched hand-held light source. It’s specially used in CWDM system. FOT3122 has the corresponding wavelengths for CWDM system, such as 1290 nm、1310 nm、1330 nm、1350 nm、1370 nm、1390 nm、1410 nm、1430 nm、1450 nm、1470nm、1490nm、1510nm、1530nm、1550nm、1570nm、1590nm、1610nm. It can output several wavelengths at the same time. And also it has the functions of wavelength recognition and online upgrade for convenient extension. This product is easy to operate and has practical functions. It’s widely used for the testing and maintenance of the CWDM system. Features It can output up to eight wavelength simultaneously Work modes are multiple and optional. It can be applied in different environments wavelength recognition function The output power of all the channels is adjustable by 0.01dBm stepping The product is easy to be upgraded and updated through Online upgrade system Easy interface and simple to operate Specifications Model FOT3122 Spectral width(nm) 20 Calibration wavelength (nm) 1290、1310、1330、1350、1370、1390、1410、1430 or 1450、 1470、1490、1510、1530、1550、1570、1590 Applicable fiber type SM,MM Modulation frequency (Hz) CW,270,330,1K,2K Connector type (FC/SC/ST)PC Power output range (dBm) -8~-18 Output regulation stepping (dB) 0.01 Output stability(dB)Note① <0.1 Inherent uncertainty(dB) 5% Display resolution(dB) 0.01 Work temperature(℃) -10~+60 Storage temperature(℃) -25~+70 Auto-off time(min) 10 Battery operating time(h)Note② 120 Power supply 3 AA batteries Dimensions(mm) 180*90*36.5 weight(g,without battery and jacket) 420
  26. 26. - 25 - Optical Light Source---------FOT3109 Series FOT3109 optical light source can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm red source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer needs. Together with the FOT3208 optical power meter, it is a perfect solution for the fiber optic network characterization. Features * Provides 1~4 output wavelengths which can be optional according to customer’s needs * CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz modulation output at other wavelengths. * High stability of the output power * Stable output wavelength * Backlight LCD display supports night operation * Compact size and decent appearance * Large LCD, easy operation * Alternative 10 minutes Auto-off function conserving battery life Specifications Type FOT3109 Wavelengths(nm) 650 1310/1 550 850/1300 850/1300/1310/1550 Emitter Type FP-LD,LED or others please specify Typical Output Power (dBm) 0 -7dBm for LD, -20dBm for LED Spectral Width(nm) ≤10 Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours Modulation Frequencies CW,2Hz CW,270Hz,1KHz,2KHz Optical Connector FC/ universal adaptor FC/PC Power Supply Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time(hour) 45 Operating Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Dimension(mm) 175x82x33 Weight (g) 295 FOT Recommendation FOT3109 Handheld Light Source is designed for optimal use with FOT3208 Optical Power Meter for measuring optical loss on both single mode and multimode fiber cable. Standard Packages MODEL INCLUDES All FOT3109 Models FOT3109 Optical Light Source, Protective Rubber Boot, 3pcs 1.5V batteries,User Manual, and Soft carrying case.
  27. 27. - 26 - Optical Light Source---------FOT3110 Series FOT3110 Mini optical light source Is the most rugged small size instrument in the industry. It integrates super small size and strong function in one unit. With 3 pieces of 1.5V alkaline batteries, it can work continuously for more than 40 hours. The total weight is only 110g. Together with the FOT3205 Mini optical power meter, it provides an excellent solution for fiber optic network and for field work. Features * High stability of the output power * Economic type, easy to use * Matched with the FOT3205 mini power meter, it constitutes the smallest optical loss test kit, perfect for field testing Applications Maintenance in Telecom Maintenance CATV Fiber Optic Lab Testing Other Fiber Optic Measurements Specifications Type FOT3110 Wavelengths(nm) 1310 or 1550 Emitter Type FP-LD Output Power(dBm) -7~-6 Spectral Width(nm) ≤10 Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours Optical Connector FC/PC Power Supply 3pcs 1.5V alkaline batteries Battery operating time(hour) 40 Operating Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Dimension(mm) 115X60X20 Weight (g) 110 FOT Recommendation FOT3110 Handheld Light Source is designed for mini portfolio with FOT3205 Optical Power Meter for measuring optical loss on both single mode and multi mode fiber cable. Standard Packages MODEL INCLUDES All FOT3110 Models FOT3110 Optical Light Source, Alkaline battery, User Manual and Protective Holster.
  28. 28. - 27 - Pen-type Visual Fault Locator (VFL)---------FOT3105P The FOT3105 Pen-type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical network. It includes: Finding the break point, poor connections, bending or cracking in fiber optic cables. Finding the faults of OTDR dead zone End-to-end visual fiber identification Features * 2.5mm universal connector, for 1.25mm connectors FC (Male)-LC (Female) convertor can be provided on requests. * Operates either in CW or Pulsed * Constant output power * Lower Battery warning * Long battery life (up to 60 hours) * Crash-proof and dust-proof design for laser head * Laser case ground design prevents ESD damage * Burning testing to ensure the reliability. * Portable and rugged, easy to use * Guarantee to CE standards include EMC, EMI, ROHS Specifications Type FOT3105 Pen-type Visual Fault Finder Central Wavelength 650nm±10nm (635nm can be required on request) Emitter Type FP-LD Output Power Optional choice for 1mw, 10mw on actual needs Optical Connector 2.5mm universal connector For 1.25mm connectors, FC (Male)-LC (Female) convertor can be optional on customer requests Operating Model Both CW and Pulse available Pulse Frequency 2~3Hz Power Supply 2 AA alkaline batteries Battery Operating Time 650nm@1mw ≥65hour 650nm@10mw≥15hour Test with Panasonic LR6 AA ALKALINE battery Operating -10~+45 (℃) Storage Temperature -40~+70 (℃) Dimension (mm) ¢15X180 Weight 120g(Without battery) Remark: Colors can be customized on request when meets certain qty! Standard Packages MODEL INCLUDES FOT3105 P Main Unit (Original color), 2pcs Alkaline battery, User Manual, and Soft Carrying case.
  29. 29. - 28 - Economical Visual Fault Locator (VFL) ---------FOT3105N The FOT3105N Economical VFL is an efficient and low cost basic fiber test tool, it provides a visible way to find fiber faults and identify fibers in an optical network during and after installation. It includes: Finding the breakpoint, poor connections, bending or cracking in fiber optic cables. Finding the faults of OTDR dead zone End-to-end visual fiber identification Features * Constant & stable output power * Special laser driver circuit design, to make sure the laser output power remains a constant power level as long as in an available battery voltage. * Low battery warning, reminds users to change the battery timely. * Long battery life(up to 40 hours with AAA batteries) * Operates either in CW or Pulsed * Pocket size and light weight, easy to use Specifications Type FOT3105N Economical VFL Central Wavelength 650nm±10nm Emitter Type FP-LD Output Power 1mw or 10mw Optical Connector FC/2.5mm universal connector For 1.25mm connectors, FC (Male)-LC (Female) convertor can be optional on customer requests Operating Model Both CW and Pulse(2Hz) available Power Supply Two AAA alkaline batteries Battery Operating Time 40hours Test with Panasonic LR6 AAA ALKALINE battery Operating -10~+60 (℃) Storage Temperature -25~+70 (℃) Dimension (mm) 100*30*18 Weight 37g Standard Packages MODEL INCLUDES FOT3105N FOT3105N VFL, Two AAA batteries, User Manualand Soft Carrying case.
  30. 30. - 29 - Optical Multi-meter---------FOT3210 Series FOT3210 is an high availability, highly cost-effective optical multimeter. It’s the integration of power meter and light source, user can operate the two function together or separately, which improves his work efficiency greatly. Moreover, FOT3210 is widely used in the fiber-optic line project construction, testing and maintenance, such as digital data network, telecommunication network and cable television. Features * Great LED display,easy to operate * Automatic switching function of the internal source wavelength * Detection of the frequency light * Power measurement in dBm and mw * Wide-range detection zone * Battery indication Specification Instrument model/ parameters FOT3210A FOT3210C Power meter Calibration wavelength(nm) 850、1300、 1310、1490、1550、1625(Wavelength is optional) Testing range(dBm) -70~+6 -50~+26 Display resolution(dB) 0.01 Uncertainty(dB) ≤±0.25 linearity(dB) ≤±0.1 Connector type FC(Optional) Light Source Working wavelengh(nm) 1310/1550(±20)(customizable) Typical Output Power(dBm) -5(customizable) Stability(dB,30min,20℃) ≤0.1dB Connector type FC/PC(customizable) Modulation frequency (Hz) CW,270Hz,1KHz,2KHz Other parts Power supply 3*AA 1.5V battery / Mini USB 5V adapter Auto-off time (min) 10 Battery continuous operation time②)(h) Source ON≥50,source off≥200 Working temperature(℃) -10~+60 Storage temperature(℃) -25~+70 Size(mm) 171×73×26 Weight(g,not including battery) 175
  31. 31. - 30 - Optical Multi-meter---------FOT3209 Series FOT3209 Hand held Optical Multi-meter Integrates the functions of an intelligent optical power meter module and of a highly stable light source module in one unit. It can also provide data storage and upload functions. It is widely used in installation ,measurement and maintenance of DDN, Telecom and CATV networks. Features * Users could write their own software by the communication protocol provided * Automatic wavelength of light source switching * Frequency identification. * Simple function mode switching * High stability of the output power * Data storage function, up to 1000 test records * USB communication port for saved testing records download * Alkaline Battery and Mini USB Adapter for power supply Applications Telecom Maintenance CATV Maintenance DDN Maintenance Fiber Optic lab testing Other Fiber Optic Measurements Specifications Type FOT3209A FOT3209C Optical Power Meter Module Detector Type InGaAs Measurement Range(dBm) -70~+6 -50~+26 Rosolution(dB) 0.01 Uncertainty ≤±0.25 linearity (dB) ≤±0.1 Frequency ID Range(Hz) <10K Optical Light Source Module Wavelengths(nm) 1310/1550(other wavelengths can be optional) Typical Ouput Power(dBm) -5 Output Stability ≤0.1 Modulation Frequencies(Hz) CW,270,1K,2K General Specifications of Multi Meter Power Supply 3 pcs 1.5V Alkaline Batteries/Mini USB 5V Adapter Battery Operating Time(h) ≥50 (Both Power Meter and Light Source are working) ≥200(Only Power Meter is working) Auto-off time (min) 10 Communication Port Mini USB Operating Temperature(℃) -10~+60 Storage Temperature(℃) -25~+70 Dimension(mm) 175X90X44.5 Weight (g,without batteries) 265 Standard Packages MODEL INCLUDES FOT3209 Multimeter, Mini USB cable,5V USB Adapter,3pcs 1.5V Alkaline Batteries,CD,User Manual, Cotton swabs and Soft carrying case.
  32. 32. - 31 - Optical Fiber Ranger ---------FOT3304A FOT3304A Fiber Ranger is newly designed fiber optic tester, it aims at fiber fiber network installation,fiber network engineering acceptance and fiber network maintenance. It can detect fiber fault location more accurate and quick, and designed for field use.FOT 3304A fiber ranger is an economical tester instead of OTDR in the test and maintenance of fiber network. Main Features * Easy to identify the faults location * Analysis reflection events and attenuation events automatically * Build-in visual fault locator function * Automatic Pulse Width Control design to ensure a convenient operation. * Up to 2500 measurement results can be stored in the unit. Specifications Model FOT3304A Operating Wavelength 1550 ± 20 Fiber Type 9/125 um Optical Connector Type FC/PC Detector Type InGaAs APD Pulse Width Auto adjustment Max.Distance(km)① 60 Distance Accuracy (Reflection Event)(m)② ±(3m + 2*10^-4 * distance) Reflection Event Dead Zone(m)③ 15m Power Supply AA,3pcs Battery Operating Time > 2500 Auto Power-off time (min)④ 10 VFL output power(mW) > 1 mW Data Storage Capacity⑤ 2000 Working Temperature(℃) -5 ~ 40 Storage Temperature(℃) -10 ~ 70 Dimensions(mm) 175*90*44.5 Weight(g)⑥ 278 Standard Packages MODEL INCLUDES All Models FOT3304A Fiber Ranger, 3pcs 1.5V batteries, User Manual,USB,CD, Cotton swabs
  33. 33. - 32 - Optical Fiber Identifier---------FOT3306B Series FOT3306B Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the bended fiber. When the traffic is present,the intermittently audible tone is activated. The FOT3306B optical fiber identifier also recognize the modulation like,270Hz,1kHz and 2kHz .When they are used to detect the frequency, the continuously audible tone is activated.There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0. The FOT3306B optical fiber identifier is powered by a 9V alkaline battery . Features * Easy-to-use with “ONE KEY” operation. * Lower power indication * Displays the relative core power * More accurate test with Sunshade * Easy-to-replace adaptors * Durable metal housing and quality construction * Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) with audible warning. Specifications Standard Packages MODEL INCLUDES FOT3306B FOT3306B Optical Fiber Identifier, 4pcs adapter heads, Sunshade, Alkaline battery, User Manual, Cotton Stick and Soft Carrying case. Type FOT3306B Identified Wavelength Range 800-1700 nm Identified Signal Type CW, 270Hz±5%,1kHz±5%,2kHz±5% Detector Type Ø1mm InGaAs 2pcs Adapter Type Ø0.25 (Applicable for Bare Fiber),Ø0.9 (Applicable for Ø0.9 Cable ) Ø2.0 (Applicable for Ø2.0 Cable ), Ø3.0 (Applicable for Ø3.0 Cable ) Signal Direction Left & Right LED Singe Direction Test Range (dBm, CW/0.9mm bare fiber) -46~10(1310nm) -50~10(1550nm) Signal Power Test Range (dBm, CW/0.9mm bare fiber) -50~+10 Signal Frequency Display (Hz) 270, 1k, 2k Frequency Test Range (dBm, Average Value) Ø0.9, Ø2.0, Ø3.0 -30~0 (270Hz,1KHz) -25~0 (2KHz) Ø0.25 -25~0 (1KHz,2KHz) -20~0 (2KHz) Insertion Loss(dB, Typical Value) 0.8 (1310nm) 2.5 (1550nm) Alkaline Battery(V) 9 Operating Temperature(℃) -10-+60 Storage Temperature(℃) -25-+70 Dimension (mm) 196X30.5X27 Weight (g) 200
  34. 34. - 33 - Optical Fiber Identifier---------FOT3306D Series FOT3306D Optical Fiber Identifier is an essential tool in fiber maintenance. It can identifier fiber without any damage , can detect anywhere in the single-mode and multimode fiber. Meanwhile, the identification device is also integrated with VFL. It is the ideal equipment for continuous fiber online tests. Features; --Online testing ,no need to stop traffic --Integrated wit VFL --Efficiently identify direction of fiber signal output and modulation frequency Specification: Model FOT3306D Wavelength range (nm) 800 ~ 1700 Applicable Fiber 3.0, 2.0, 0.9 Frequency (Hz) 270,1K, 2K Frequency range >-20dBm Identify the direction >-30dBm VFL Wavelength 650nm Output power 1mw (10mW optional) Connector FC/PC Power supply 2 * AA 1.5V battery Standard Packages MODEL INCLUDES FOT3306D FOT3306D Optical Fiber Identifier,3pcs adapter heads, Sunshade, Alkaline battery, User Manual, Cotton Stick and Soft Carrying case.
  35. 35. - 34 - FTTH Terminal Tester---------FOT3228 Series FOT3228 FTTH tester is a specially designed for portable instruments for FTTH terminal installation and maintenance , It can quickly and easily detect optical fiber terminal optical fiber condition, With universal interface design and multi-interface option so that products can be applied to detect a variety of environments. Key Features: Easy test of fiber optical traffic status -Judge the traffic status:Normal,Failure or Idle Find out upload and download traffic problem - Optical signal quality evaluation Universal 2.5mm connector -small sized and portable Specification Model FOT3228 Wavelength 1310nm 1490nm 1550nm Range(dBm) -30 -- +10 -30 -- +10 -30 -- +20 Band pass 1310±50 1490±10 15500±10 Insert Loss(dB) ≤ 2 Connector Universal 2.5mm,FC/SC/ST optional Power 2*AAA 1.5V battery Working Time ≥40 hours Working Temperature -10℃ ~ 60℃ Storage Temperature -25℃ ~ 70℃ Weight 110g without battery Dimension 121×69×25mm
  36. 36. - 35 - Optical Talk Sets----------FOT4103N FOT4103N Optical Talk Set is an intelligent and efficient instrument that combines in one set the functions of both a digital optical phone and a stabilized light source. It is widely used in operations of installation, optical testing, maintenance and fiber attenuation value testing in data network, CATV and Telecommunication network. The FOT4103N Talk Set can carry out full-duplex communication with high quality connection and not be affected by distance. Features * Full-duplex digital communication with high quality conversation connection and low background noise * Together with Optical Clip-on Coupler, enables on line communications available * Combining functions of both a digital optical phone call and a stabilized light source. * Large LCD display with backlight * Low battery power indication Applications Maintenance in Telecom Maintenance CATV Fiber Optic Lab Testing Other Fiber Optic Measurements Specifications Type FOT4103N Wavelength(nm) 1310/1550 Emitter Type FP-LD Transmission Distance(KM) ≥100 Dynamic Range(dB) ≥ 33 Output Power(dB) -5~-7 Modulation(Hz) CW,270,1K,2K Output Stability (dB,30min,20 °C ) ≤ 0.1 Power Supply 3 pcs 1.5V Alkaline Batteries/8.4V Power Supply Adaptor Battery Operating Time 5 hours Optical Connector FC/PC Operating Temperature(°C) -10 ~ +60 Storage Temperature(°C) -25 ~ +70 Dimension(mm) 198X102X50 Weight(g) 310 Remark: FOT also provides Fiber Optic Clipon Coupler device according to customers needs Standard Packages MODEL INCLUDES FOT4103N Optical Talk Set (pair), Headset, 3 pcs 1.5V Alkaline Batteries, 8.4V Power Supply Adaptor, User Manual, Cotton swabs and soft carrying case.
  37. 37. - 36 - Optical Variable Attenuator ---------FOT3303 FOT3303 handhold optical variable attenuator is used for continuously variable optical signal attenuation. As the attenuator is used in the laser system for the on-line testing, therefore, FOT3303 can be used in the digital system of communication devices (such as: PHD, SDH) and also in the system of adopting analog modulation (CATV) Main Features * stepwise attenuating by circumgyrated dial: attenuating step 0.05dB * Provide with the function of displaying dB and dBm attenuating value * 10 minutes Auto-off function can be activate and deactivate with keypad operation. * After off the instruments, the system will have the memorizing of the attenuating value and the attenuating step, in order to restore the system back to the previous shut down state when open the instruments next time * Portable, rugged, lightweight; Easy to use. Applications Telecom Maintenance,CATV Maintenance Comprehensive cable construction system Optical instruments research and development,education and lab testing Specifications Type FOT3303 Attenuating wavelength Range 1260~1650nm Fiber Model 9/125um SM Optical Connector FC/PC Calibrated wavelengths 1310/1490/1550/1625nm Measurement Range 2~60dB Resolution 0.05dB Minimize Insertion Loss <2.0dB Linearity ±0.5dB Repeating ±0.2dB Attenuating Accuracy ±0.8dB Return Loss at Input/ Output >35dB(typical value40dB) Max input +20dBm Displaying type lattice 128*64 black and white, white back ground light Rechargeable batteries 8.4V Power supply adaptor 8.4V Operation temperature 0~40℃ Operation Time 40 hours Storage temperature -10~60℃ humidity 0~85%(non- condensation) Dimensions 180X90X36.5 Weight 427g Standard Packages MODEL INCLUDES FOT3303 FOT3303 Main Body, Protective Rubber Boot, Rechargeable battery, Power Supply Adaptor, Instruction Manual and Cotton Swabs and Rigid hard carrying case.
  38. 38. - 37 - Optical Return Loss Tester-----FOT3308 FOT3308 hand held return loss tester is used to measure the return loss in the field fiber optic linking, in order to adjust the quality of the optic fiber end-face, and to make sure the fiber optic communication is in good condition. This FOT3308 hand held return loss tester can realize measurement of Return Loss, Insertion Loss, Output power, and also can be used as the laser source. Moreover, it has the data storage function of 500 measurement items. Features A variety of functional test pattern (RL.IL.OPM.OLS) The test data uploading is stored. Support USB power supply function. Interface simple, easy to operate. Specification Model FOT3308 Return Loss Testing Wavelength(nm) 1310/1550 Plus Width(nm) <5 Displaying range(dB) -70~+0 Accuracy(dB) ±0.5 Optical Connector FC/APC Resolution(dB) 0.01 Power Meter Wavelength(nm) 800~1700 Calibrated wavelength(nm) 850, 1300, 1310, 1490, 1550, 1625 Connatural uncertainty(dB) ±0.25 Displaying Range(dBm) -70 ~+6 Communication Port USB Alkaline battery 3*AA,1.5V Display LCD Operation Temperature(°C) -10~+60 Storage Temperature(°C) -25~+70 G.W. 380g Packing sizes 180mm(L)*90mm(W)*36.5mm(H)
  39. 39. - 38 - Optical Fiber Cable Identifier-----FOT6208 FOT6208 is a tool,using acoustics,to locate and identify fiber cables which could buried in pipe, tunnels or hanged on overhead poles.With user-friendly interface, this device is simple and practical, non-toxic, do not damage fiber optic cable to locate and identify.. Features -Adjustable sensitivity to adapt to a variety of detection range - Maximum detection range of 60Km - Real-time LCD display - A variety of ways to accurately identify the fiber cable - VFL integrated - Remote testing of cable mechanical perturbations - Audio or video cable positioning method Specification Model FOT6208 Max Detection Distance 60Km Output power of VFL >-3dBm Fiber type SM Connector SC/APC Output mode Vibration amplitude,pulse mode, sound Power supply DC-12V Battery Rechargeable Working temperature 0~45℃ Storage temperature -20~60℃ Dimension 100*200*30mm Weight 860g
  40. 40. - 39 - Digital/Analog Signal Lever Tester-----FOT1703 FOT1703 Digital/Analog signal level tester,by adapting high-speed micro processor, is an essential equipment for CATC installation and maintenance. It has accurate detection and analysis of QAM performance indicators - average power, MER, BER, constellation. Features: 1.Supporting multiple DVB mode: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM. 2. Wide rate setting: 1MS / S-9MS / S. 3. QPSK COFDM power detection. 4. The spectrum analysis function can truly reflect the actual spectrum channels. 5. Automatic analog and digital channels to create a function for detecting any network. 6. The comprehensive analog TV indexes detection - level, V / A, C / N, slope, automatic detection. 7. High-definition, wide temperature four gray FSTN LCD display, has a good visual effect. 8. The fast charge, long continuous working time is more than five hours, for a variety of measurement needs. 9. The reverse return signal measurements. 10. A key to restore factory settings Specification Model FOT1703 Digital DVB Testing Frequency Range 46MHz~870MHz Modulation Mode DVB-C/ITU-T J.83-Annex A DVB Mode 16QAM, 32QAM, 64QAM, 128QAM,256QAM Spectrum scanning broadband 2.5MHz,6.25MHz,12.5MHz,25MHz,62.5 MHz Channel scan Upto 100 channel Digital average power 30dB uV~110dB uV accuracy 2.5dB Broadband User setting Symbol rate 1MS/S~7MS/S Modulation error rate MER 20dB~39dB
  41. 41. - 40 - Accuracy -2dB~+2dB Bit error rate R-S front 1E-3~1E-9 Analog TV Testing Frequency Range 46MHzMHz~870MHz Channel Range 1CH~56CH Added channels Z1~Z43 Resolution 10KHz Broadband 280KHz Level measurement range 25dBuV~120 dBuV Level measurement accuracy -1.5dB+1.5dB Resolution 0.1 dB Rectification Peak Input Resistance 75Ω C/N Input signal range >70dBuV Accuracy -2dBuV~+2dBuV(AC/DC) Voltage Measurement Input 0~80V Accuracy -2V~+2V Power Supply DC supply 7.2V AC supply AC220V/50Hz -10%~+10% Battery capacity 6 hours of continuous work Charging time Less than 8 hours Other Working temperature -20℃~50℃ Display 128x64 graphical wide temperature range backlit LCD display
  42. 42. - 41 - Underground Pipe and Cable Locator-----FOT7570 Series FOT7570 Pipeline & Cable Locator consists of a Transmitter, a Receiver and Accessories, used in the underground pipeline&cable route accurate locating, the burying depth measuring, long distance tracing, and insulation fault point detecting. We adopted multi coil electromagnetism technology on the Pipeline & Cable Locator, enhanced the pipeline&cable location precision for the burying depth and the goal pipeline identification capability, also could accurately carry on tracing and location to the goal pipeline&cable in the pipeline&cable crowded complex region. So the Pipeline & Cable Locator is widely used in the telecommunication, electric, water supply, natural gas, physical prospecting, petrochemical and city construction etc. Features --Adopt the advanced signal processing technology and the latest integrated circuit.. --Detecting frequency Optional: 480Hz, 7.7KHz , 31KHz and 61KHz (active)and 50Hz(passive). --Fault Fining (FF) Mode:Detect and locate the insulate fault point of pipeline and cable. --Find loading signal on the pipeline through stethoscope from multitudinous pipelines. --Automatic control receive gain. --Automatic test insulation resistance and the residual voltage of pipeline and alarm. Specification of Transmitter Injection method 480Hz、7.7KHz、31KHz 、61KHz Induction method 31KHz、61KHz Clamping method 31KHz Fault Finding Output Voltage 0-400Vp-p adjust according to the insulation conditio n Output wave shape sine wave Power Supply 11.1VDC 4.4AH Li-battery Maximum output power 10W Specification of Receiver Power loss <1W Power Supply 11.1VDC1.8AH Li-battery Max. Detecting burying depth 4.5 meters Tolerance of burying depth ±0.05H ±5cm (“H” is pipeline burying depth) Tolerance of route for detecting ≤5cm Effective length under detecting (Injection method) ≥10Km
  43. 43. - 42 - Effective length under detecting (Induction method) ≥3Km Effective length under detecting (Clamping method) ≥6Km Insulated fault detecting ≥2 MΩ Packing list Item Name Quantity Note 1 Transmitter 1 pc 2 Receiver 1 pc 3 Carrying case 1 pc 4 User’s manual 1 pc 5 Adapter 2 pc 6 Earth Stick 1 pc 7 Signal Output line 1 pc 8 Inductive Clamp 1 pc Optional 9 Stethoscope 1 pc Optional 10 A-frame 1 pc Optional 11 GPS 1 pc Optional 12 Certificate 1 pc
  44. 44. - 43 - Fiber connector click pen cleaner -----FOT6531 Series The Click-Cleaner is an easy-to-use option for cleaning connectors in adapters. Simply insert the Push-Cleaner into an adapter and push until an audible “click” is heard. The Click-Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently, cleaned. There are more than 800-cleans lifetime for each Click-Cleaner.The Click-Cleaner is a must-have for field technicians. Small enough to fit in a shirt pocket and a great addition to cleaning kits. Save your wrist – no more twist! Features: * Cleans both APC and UPC connectors * Ergonomic, comfortable design with single action cleaning * Precise mechanical action delivers consistent cleaning results * Low cost per clean with over 800 cleanings in one unit * Effective on a variety of contaminates including dust and oils * Automatic advance ensures each clean is performed with fresh cleaning tape * Compliant with EU/95/2002/EC Directive (RoHS) Model: SC-250-C For SC/FC/ST adapter LC-125-C For LC/MU adapter
  45. 45. - 44 - Fiber connector Cassette cleaner -----FOT-CC100 Series FOT-CC100 Fiber clean cassette is essential accessory to maintain and guarantee good quality of fiber optic connection. It is the best non-alcohol cleaning method for various fiber optic terminations which is simply and swiftly used. Box tape replacement is offered to make sure low cleaning cost .Suitable for connector such as SC 、FC、MU、 LC、ST、D4 、DIN etc. Feature Special non-alcohol superfine fiber . Friendly using efficient cleaning Easy to replace the tape no pollution Cleaning time 500+ Level of cleaning is 100 Specification Type FOT-CC100 Fiber Connector Cleaner Cleaning Times Over 500 times per reel Cleaning Result -20 to -50 dB (Return Loss) Operating Temperature -10℃ to +50℃ Weight 100 g Ordering Information Name Function description Quality Standard Accessories FOT5005 Fiber Cleaner Cleaning the fiber connector ferrule (internal reel tape is included) 1 Set Optional Accessories Reel Tape Replacement Reel Tape of FOT5005, can be sold with extra cost 1pcs
  46. 46. - 45 - Field Fiber connector Microscope -----FOT-H400 Series FOT-H400 Field Fiber Microscope is a low cost and high quality fiber inspection tool which is available in 400X magnification and the white LED light to provide coaxial illumination to connector end-faces. This is method of illumination products high-resolution detail of end-face scratches, defects and contamination. Features : Available for inspecting fiber connector's ends 1.Fit for single-mode and multimode, acceptable port: φ2.5mm and φ1.25mm; 2.Magnification effect: 400 or 200 times; 3.Power: AAA battery 2 pcs; 4.White light, clearly Inspecting effect; 5.Portability, widely used in outdoor constructions. Packing List Microscope 01 PC 2.50 mm Ferrule Adapter 01 PC 1.25 mm Ferrule Adapter 01PC packing bag 01 PC
  47. 47. - 46 - Optical Fiber Cleavers------FOT008 Series The cleaver is a tool used for cleaving multiple and single stand optical fibers. This model is with an optional trash bin. Specifications: Applicable range Single Core silex-fiber Coating Diameter φ0.25mm &φ0.9mm Fiber Diameter 125μm Cleave Length 9~16mm(φ0.25) 10~16(φ0.9) Dimension 59mm(W)*55mm(D)*49mm(H) Weight 255g Cleaving Angle ≤0.5° Blade Life 12000 times
  48. 48. - 47 - Optical Fiber Tool Kit------FOT5004 Series This set of tool kits is especially used in the FTTx solution, combine the function of the in-door cable stripper, cleaver, cleaning, and testing. It is an perfect tool kits in the fiber optic maintenance. NO. Tool Name Qty Usage 1 Fiber Optic stripper 1 Peeling the coat of the fiber 2 rubber-insulated fiber cable stripper 1 Peeling the coat of the cables 3 Alcohol Bump Bottle 1 storing alcohol 4 Cleaning Cotton Swabs 2 cleaning fiber 5 FOT3105P Visual Fault Locator 1 Visually checking breakpoints, poor connections, bending or cracking in fiber optic cables 6 FOT3208 optical power meter 1 Test the output power and fiber loss 7 Optical Fiber Cleaver 1 Cleave the fiber 8 Carrying Case 1 Containing the above tools
  49. 49. - 48 - Optical Fiber Tool Kit------FOT5003 Series FOT5003 cable Inspection & maintenance tool kits composed of FOT3205 mini power meter, FOT3304N fiber ranger, fiber cleaver and other optical tool kits. This set of tool kits can test the output power, Identify the long and short distance fault locations, connect the cables and so on. FOT5003 is mini in size, convenience for carrying, quite popular used in the field of optical cable maintenance. Packing List No. Name Model No Set Usage 1 Fiber Ranger FOT3304A 1 Identify the fault location for the long and short distance 2 Alcohol Bottle 5mL 1 storing alcohol 3 Mechanical splicing 1 For fast splicing of the fiber 4 Optical Fiber Cleaver 1 Cleave the fiber 5 Mini Power Meter FOT3205 1 Test the output power 6 Hexangular wrench 1 Take apart or assemble the splicing closure 7 CFS-2 Fiber optic stripper 1 Strip the jacket or coated fiber 8 wire-cutter 1 Cut the strengthened cable core 9 Monkey Wrench 8” 1 Take apart or assemble the splicing closure 10 Cutter 1 Strip the fiber (extra refill cutter) 11 Cross Screwdriver 1 Take apart or assemble the splicing closure 12 Straight Screwdriver 1 Take apart or assemble the splicing closure 13 User manual FOT5003 1 Instruction and maintenance for 14 Carry Case FOT 1 Contain all above tools
  50. 50. - 49 - Optical Fiber Tool Kit------FOT5001 Series FOT5001 Optical Cable Emergency Tool kits is composed of most of the essential tools, it is suitable for general usage during the fiber installation and maintenance of fiber networks. No. Tool Name Qty Function 1 Fiber Optic stripper(CFS-2) 1 Peeling the coat of the fiber 2 Assembled sleeve wrench 1 Fixing splice closure/terminal box 3 2M Tape Measures 1 Measuring the length of the fiber cable 4 Utility Knife 1 Accessorial tool for peeling the fiber cables 5 Piano wire clamp 1 Nipping the strengthening core of the fiber cables 6 Cross Fiber reamer 1 Peeling the fiber cables 7 Nipper 1 Entwining the fiber cables 8 Scissors 1 Snipping the fiber of the cable 9 Pliers 1 Snipping the steel wire of the fiber cables 10 Acuate clamp 1 Accessorial tool for the splicing 11 Mini Screwdriver 2 Fixing the screws 12 Inner-hexagonal Wrench 1 Fixing the inner hexagonal screws 13 Adjustable Spanner 1 Accessorial tool for the splicing 14 Assembled Screwdriver 1 Loading and uploading the fiber optic splice closure 15 Alcohol Pump Bottle 1 Cleaning the fiber 16 Mark Pen 1 Marking the fiber 17 Flashlight 1 Lighting at night 18 diagonal cutting pliers 1 Accessorial tool for peeling the fiber cables 19 Voltage test pen 1 Testing the security of the electrical source and electrical wire 20 Loose skinning pliers 1 Peeling the loose of the fiber cables 21 Cleaning Air Ball 1 Blow off dust 22 Carrying Case 1 Containing the above tools

Views

Total views

266

On Slideshare

0

From embeds

0

Number of embeds

3

Actions

Downloads

3

Shares

0

Comments

0

Likes

0

×