This document provides information about Unimec S.p.A., an Italian manufacturer of mechanical screw jacks, gearboxes, and other industrial equipment. It details the company's history of over 33 years in business, 20,000 square meter factory, production processes, quality materials used, and wide range of products used in various industries such as aerospace, food processing, and steel manufacturing. The document also outlines the company's focus on customer service both before and after sales.
7. 7
PRODUCTION: SLIM, EFFICIENT ANDPRODUCTION: SLIM, EFFICIENT ANDPRODUCTION: SLIM, EFFICIENT ANDPRODUCTION: SLIM, EFFICIENT AND
SKILLEDSKILLEDSKILLEDSKILLED
WorkingWorkingWorkingWorking componentscomponentscomponentscomponents
(90% of the production(90% of the production(90% of the production(90% of the production
isisisis made bymade bymade bymade by usususus)
---- RollingRollingRollingRolling;;;;
---- LathesLathesLathesLathes;;;;
---- ToothingToothingToothingToothing;;;;
---- GrindingGrindingGrindingGrinding;;;;
---- MillingMillingMillingMilling....
AssemblingAssemblingAssemblingAssembling
TestingTestingTestingTesting –––– QualityQualityQualityQuality
departmentdepartmentdepartmentdepartment
LogisticsLogisticsLogisticsLogistics andandandand
stockingstockingstockingstocking
19. MECHANICAL SCREW JACKSMECHANICAL SCREW JACKSMECHANICAL SCREW JACKSMECHANICAL SCREW JACKS
19
• ModelModelModelModel: TP, TPR;
• CompleteCompleteCompleteComplete rangerangerangerange: 14 sizes (from 18x3 to
250x22). Special spindle:
diameters and pitches on
demand
• CarryingCarryingCarryingCarrying capacitycapacitycapacitycapacity: from 500Kg to 200
Tons
• SpindleSpindleSpindleSpindle lenghtlenghtlenghtlenght: from few mm to 12 metres
• AccessoriesAccessoriesAccessoriesAccessories: Protection, Mounting
(standard and special)
20. 20
HIGH QUALITY MATERIALSHIGH QUALITY MATERIALSHIGH QUALITY MATERIALSHIGH QUALITY MATERIALS
• 16161616NiCrNiCrNiCrNiCr4444 casehardened and grinded worm
screw high geometrical precision, high
wear resistance, high superficial hardness
• CuAlCuAlCuAlCuAl10101010FeFeFeFe2222 worm wheel self lubricant
performances (Cu) and high mechanical
resistance (Al and Fe)
• RolledRolledRolledRolled CCCC45454545 spindle superficial hardening,
crystal lattice continuity, better finishing,
roughness equal to grinding, better wear
resistance (due to bench hardening)
• GLJGLJGLJGLJ 250250250250 completely machined carter (over
9010 size carter is in electronically welded
steel)
22. ALEPH SERIESALEPH SERIESALEPH SERIESALEPH SERIES
22
• Unimec screw jacks in polymer: 3333 sizes,
various ratios, load fromfromfromfrom 700700700700 daNdaNdaNdaN upupupup totototo
1111....800800800800 daNdaNdaNdaN per single jack.
• It can work dry (withoutwithoutwithoutwithout lubricantlubricantlubricantlubricant).
• Direct motor connection.
• SSSStainlesstainlesstainlesstainless steelsteelsteelsteel configurationconfigurationconfigurationconfiguration for food
industry.
• CheaperCheaperCheaperCheaper with maintaining the highhighhighhigh qualityqualityqualityquality
of the products.
23. SCREW JACKS FOR BALL SCREWSSCREW JACKS FOR BALL SCREWSSCREW JACKS FOR BALL SCREWSSCREW JACKS FOR BALL SCREWS
23
• It is reversiblereversiblereversiblereversible: it has high efficiencies and
so it’s good for heavy cycles (high speeds).
• It is universaluniversaluniversaluniversal: three only sizes are enough
for the assembling of 25 different sizes of
ball screws, of whatever brand you desire.
• It is uniqueuniqueuniqueunique: there isn’t a screw jack
builder, except Unimec, that has designed
a jack specifically for a ball screw.
• It is tecnicaltecnicaltecnicaltecnical: it’s important to propose it
to customers but ask for technical office
support.
24. BEVEL GEARBOXESBEVEL GEARBOXESBEVEL GEARBOXESBEVEL GEARBOXES
24
• PowerPowerPowerPower: up to 1.650 kW
• GearGearGearGear ratioratioratioratio: from 1/1 to up to 1/12.
• GleasonGleasonGleasonGleason toothingtoothingtoothingtoothing: thanks to its geometry, it
better distributes tooth strength during
transmission: helix allows a softer meshing
and variable thickness makes tooth more
rugged where it needs (at its base).
• For all models it’s possible to apply motormotormotormotor
flangesflangesflangesflanges ((((standarstandarstandarstandar/special)/special)/special)/special): Brushless motor,
Nema motors, reducers, hydraulic motors.
26. STAINLESS STEEL SERIESSTAINLESS STEEL SERIESSTAINLESS STEEL SERIESSTAINLESS STEEL SERIES
• 204204204204,,,, 306306306306 andandandand 407407407407 sizessizessizessizes (screw jacks) and 86868686,,,,
110110110110 andandandand 134134134134 (gearboxes) are available, by
series, completely in AISIAISIAISIAISI 316316316316 (+40%
expansive on the most common AISI 304)
• Every component can be realized in stainless
steel, but with growing times and prices
26
28. 28
COUPLINGSCOUPLINGSCOUPLINGSCOUPLINGS
• HighHighHighHigh torsiontorsiontorsiontorsion stiffnessstiffnessstiffnessstiffness blade couplings.
• ResistanceResistanceResistanceResistance to corrosive agents,
absorption of vibrations;
• Use in anyanyanyany temperaturetemperaturetemperaturetemperature;
• AbsorbAbsorbAbsorbAbsorb axial and parallel movement
errors.
• R+W PARTNERSHIPR+W PARTNERSHIPR+W PARTNERSHIPR+W PARTNERSHIP = to= to= to= top qualitiesp qualitiesp qualitiesp qualities
couplings and shaft;;;;
• ResistanceResistanceResistanceResistance to corrosive agents,
absorption of vibrations;
• Use in anyanyanyany temperaturetemperaturetemperaturetemperature;
• AbsorbAbsorbAbsorbAbsorb axial and parallel movement
errors.
32. 32
PRE SALES
CUSTOMER CARECUSTOMER CARECUSTOMER CARECUSTOMER CARE
• Five languages;
• Three landing page (Turkish, Czech and
Korean);
• Complete;
• Always actual (with news) = dynamic
factory
• Free 2D and 3D drawing download
www.unimec.eu
38. 38
OUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TO
BUILDBUILDBUILDBUILD
SOLAR PANEL
39. 39
OUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TO
BUILDBUILDBUILDBUILD
BENDING MACHINE
40. 40
PANTOGRAPH DRIVEPANTOGRAPH DRIVEPANTOGRAPH DRIVEPANTOGRAPH DRIVE
MACHINESMACHINESMACHINESMACHINES
OUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TO
BUILDBUILDBUILDBUILD
41. 41
SAT ANTENNASSAT ANTENNASSAT ANTENNASSAT ANTENNAS
OUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TO
BUILDBUILDBUILDBUILD
45. 45
VERTICAL LATHESVERTICAL LATHESVERTICAL LATHESVERTICAL LATHES
OUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TOOUR PRODUCTS ARE USED TO
BUILDBUILDBUILDBUILD