printed and digital designs

1. 1/8
Linde Brand AbrasivesA cut above the rest!
1289E_1209
Productivity:
• Smooth cutting and grindingresults on ferrous metals• Provides a fast cut rate• Minimizes operator fatigue• Decreases grinder/machinemaintenance
Value:
• Backed by Linde, a leadingglobal gas and engineeringgroup who provide innovativesolutions
• Innovative products thatdeliver enhanced wheel life• Free abrasive assessment
Safety:
• All products designed andtested to ANSI B7.1 standards• Product manufactured in ISOcertified plants
• Call Linde about on-site safetyaudits
Service:
• Nationwide customer supportfor technical guidance andapplication expertise at1-888-256-7359 or Info@lindecanada.com
• Coast-to-coast branch
locations
Delivering value, maximizing productivity, without
compromising performance and safety
Linde 5860 Chedworth Way, Mississauga, Ontario L5R 0A2 Tel 1-888-256-7359, Fax 1-877-262-8955, www.lindecanada.com Linde Canada Limited is a member of The Linde Group.
Linde is a trading name used by companies within The Linde Group.
The Linde logo is a trademark of The Linde Group. © 2010 Linde Canada Limited
Our focus lies
with the customer.
Have questions about your cylinder
delivery and respiratory service? Please
reach out to our numbers below.
Main contact number: 866-LIFEGAS (543-3427)
Electronic fax: 800-296-2222
Email general: sales@lifegas.com
Email intake: intake@lifegas.com
2957_0216
Linde Gas North America LLC. is a member of The Linde Group. Linde is a trading name used by companies within The Linde Group. “Linde” and the Linde logo are trademarks of The Linde Group. © The Linde Group 2016. All rights reserved.
LifeGas, a division of Linde Gas North America LLC.
Phone 1-866-543-3427, sales@lifegas.com, www.linde-healthcare.us
Linde: Living healthcare
Posters

2. 2/8
HTML e-Newsletter
Hubspot e-invitation

3. 3/8Web graphics
Animated gif file
E-mail header and footer

4. 4/8
Catching a market on the move
Votre expert en
produits de sécurité
900 Boul Pierre-Bertrand
Québec, G1M 3K2
Votre expert en
produits de sécurité
900 Boul Pierre-Bertrand
Québec, G1M 3K2

5. 5/8
Bottom Injection. Cryogenic
Chilling for Mixing and
Blending Operations.
Now available in LIN or CO2
versions!!
Flexible use for forming with
fresh or frozen product
Fast, consistent, cost effective
chilling
Increases your forming
production and product quality
Immersion Spiral.
Delivers “Best of Both
Worlds” for IQF
Improve yield losses with this
high capacity, high efficiency IQF
freezing solution
Ideal solution for your hard to
freeze, IQF cooked, glazed products
Hygienic design is custom
engineered to match your plant
configuration
3
3
3
Impingement. Fastest, Most
Efficient Freezing System in
The World!
Up to 40% savings in cryogen cost
over nitrogen immersion freezers
Crust freezing with increased yield
and improved quality, in half the
space
Process up to 12,500 pounds per
hour in 14 linear feet
3
3
3
3
3
3
3
Is 20,000 lbs per hour production Myth or Reality?
With Linde Cryogenic Technology, it is REALITY!!
Cryogenic freezing and chilling
technology for the food industry.
Simply because we love good food.
Trade show graphics

6. 6/8
Linde North America, Inc.
575 Mountain Ave., Murray Hill, NJ 07974 US, laura.coble@linde.com, www.lindeus.com
2656_0315
© The Linde Group 2015. All rights reserved.
For more information please visit
http://bit.ly/LindeCareers
Linde is an equal opportunity employer. EOE/
Minorities/Females/Vet/Disabled
LindeGases_NA
LindeGasesNorthAmerica
LindeLikes
Are you ready to take the lead in creating real value for Linde‘s customers?
Ask one of us about the opportunities at Linde as an engineer!
“The program has given me the ability to
use my degree in a challenging and non-
conventional way; taking engineering concepts
and applying them to consumer based
processes, making enhanced efficiency and
profitability possible for our customers.”
“The rotational program will jump start your
career at Linde by challenging you to develop
the technical engineering skills and customer
facing people skills necessary to succeed.”
Alessandra
Equipment Engineer at Linde Americas
Francois
Project Manager at Linde Americas
Are you ready to take the lead?
Linde‘s Summer Internships and Rotational Program.
Download
Blippar app
Aim device
at picture
Watch as it
comes to life
Interactive
picture
Are you ready to take the lead?
Linde‘s Summer Internships and Rotational Program.
Download
Blippar app
Aim device
at picture
Watch as it
comes to life
Interactive
picture
Are you ready to take the lead?
Linde‘s Summer Internships and Rotational Program.
Download
Blippar app
Aim device
at picture
Watch as it
comes to life
Interactive
picture
Banner Stands
Postcard

7. 7/8
Packaging
Linde Solidarc 115™
Premium MIG Welding Wire.
Fil de soudage MIG de qualité supérieure.
Recommended Gases:
Gaz recommandés :
• MISON® 8C
• MISON® 15C
• Argoshield Pro
• Argoshield Universal
• Argoshield GP
• Argoshield Light
Not for sale or distribution
to the USA.
Ce produit ne peut être vendu
ou exporté aux États-Unis.
Manufactured in Canada
under a quality system
certified to: / Fabriqué au Can-
ada conformément
au système qualité certifié :
ISO 9001-2008
www.lindecanada.com
To re-order:
Pour commander :
www.shop.lindecanada.com
1-888-256-7359
1984_0514
Fumes and gases can be hazardous to your health. Arc rays can injure your eyes and
burn your skin. Electric shock can kill.
Before use read and understand the manufacturer‘s safety data sheet, instructions
and your employer’s safety practices. Refer to www.lindecanada.com.
Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both,
to keep fumes and gases from your breathing zone and general area. Wear correct
eye, ear and body protection. Do not touch live electrical parts.
First aid measures: If any symptoms of overexposure to fumes exist, remove
operator to fresh air and ensure they are resting and breathing comfortably. In
case of arc ray injury or electric shock, employ normal first aid techniques and
call a physician IMMEDIATELY.
Refer to CSA W117.2 or American National Standard Z 49.1 ‘Safety in Welding and
Cutting’ published by the American Welding Society, 550N.W. LeJeune Road, PO Box
351040, Miami, Florida 33135.
NOT FOR SALE IN OR EXPORT TO THE USA
Special Precautions with this product
There are no recognised hazards associated directly with these unused welding
consumables prior to welding.
The fumes given off during the use of this product may contain quantities of
manganese compounds. The exact amount of these compounds present in the
fume depends on the steel being welded and the shielding gas being used. In
addition ozone and nitrogen dioxide will be produced in the surrounding air by
the welding arc radiation.
• Harmful if inhaled
• Harmful if swallowed
Under certain conditions, manganese overexposure or inhalation of excessive
amounts of manganese can affect the central nervous system, resulting in impaired
speech and movement. This condition is considered irreversible.
Ozone and nitrogen dioxide overexposure can produce eye, respiratory and lung
irritation, and can also produce longer term lung effects such as decreased lung
capacity, chronic bronchitis and emphysema.
Dispose of collected fume in accordance with local regulations.
• May cause long lasting harmful effects to aquatic life, if disposed of incorrectly
Adherence to recognised occupational exposure standards
for all fume constituents should be observed during use. See the Materials
Safety Data Sheets for details.
Packaging and wire should be disposed of as general waste or recycled. Fume col-
lected from extraction units and from cleaning operations will contain heavy metal
compounds and should be disposed of in accordance with local regulations.
Before use read and understand the instructions on this package.
NOT FOR SALE IN OR EXPORT TO THE USA
Linde Canada Limited
5860 Chedworth Way, Mississauga, Ontario L5R 0A2
Phone 1-888-256-7359, Fax 1-877-262-8955, www.lindecanada.com
Linde Canada Limited is a member of The Linde Group. Linde is a trading name used by companies within
The Linde Group. The Linde logo is a trademark of The Linde Group. ©The Linde Group 2014.
Les fumées et les gaz dégagés peuvent être néfastes. Les rayons de l‘arc peuvent blesser les
yeux ou brûler la peau. Les décharges électriques peuvent causer la mort.
Avant d‘utiliser, lire et bien comprendre la fiche signalétique du fabricant, les directives
et les pratiques de l’employeur en matière de sécurité. Se référer au www.lindecanada.com.
Ne pas placer la tête directement dans la fumée. Prévoir une ventilation suffisante, une évacua-
tion au niveau de l‘arc, ou les deux, pour éliminer les vapeurs et les gaz du poste de travail et du
local. Porter des lunettes de sécurité, des protecteurs auditifs et des vêtements de protection
appropriés. Ne pas toucher de pièce électrique sous tension.
Mesures de premiers soins : Si des symptômes de surexposition à la fumée sont présents,
emmener l‘opérateur à l‘air frais et s‘assurer qu‘il se repose confortablement et respire aisé-
ment. En cas de décharge électrique ou de blessure causée par les rayons de l‘arc, employer les
techniques normales de premiers soins et appeler un médecin
IMMÉDIATEMENT.
Se référer à la norme W117.2 de la CSA ou à l‘American National Standard Z 49,1 « Safety in
Welding and Cutting » publiée par l‘American Welding Society, 550N.W. LeJeune Road, PO
Box 351040, Miami, Florida 33135.
INTERDIT À LA VENTE ET À L’EXPORTATION AUX É.-U.
Précautions particulières à prendre avec ce produit
Il n’y a pas de dangers reconnus associés directement à ce matériel de soudage non utilisé avant
d’amorcer les opérations de soudage.
La fumée produite durant l’utilisation de ce produit peut contenir une certaine quantité de
composés de manganèse. La quantité exacte de ces composés présents dans la fumée dépend
de l‘acier soudé et du gaz de protection utilisé. De plus, l’ozone et le dioxyde d’azote seront
produits dans l’air environnant par la radiation de l’arc de soudage.
• Nocif par inhalation
• Nocif en cas d’ingestion
Sous certaines conditions, la surexposition ou l‘inhalation d‘une quantité excessive de man-
ganèse peut avoir des effets sur le système nerveux central, causant une altération de la parole
et des mouvements. Cet état est considéré comme irréversible.
La surexposition à l’ozone et au dioxyde d’azote peut occasionner une irritation des yeux,
des voies respiratoires et des poumons, et peut également produire des effets pulmo-
naires à plus long terme, telle une capacité pulmonaire décroissante, des bronchites chro-
niques et de l’emphysème.
Éliminer la fumée accumulée selon la réglementation locale.
• Peut occasionner des effets nocifs à long terme sur la vie aquatique, si éliminée de
manière non conforme
Le respect des normes d‘exposition professionnelle reconnues pour toutes les compo-
santes de fumée doit être observé durant l‘utilisation. Se référer aux fiches signalétiques
pour plus de renseignements.
Les emballages et les fils doivent être jetés ou recyclés. La fumée accumulée dans les unités
d’extraction et lors des opérations de nettoyage contiendra des composés de métaux lourds et
doit être éliminée dans le respect des réglementations locales.
Avant d’utiliser ce produit, lire et bien comprendre les instructions décrites sur l’emballage.
INTERDIT À LA VENTE ET À L’EXPORTATION AUX É.-U.
Linde Canada Limitée
5860 Chedworth Way, Mississauga, Ontario L5R 0A2
Tél 1-888-256-7359, Téléc 1-877-262-8955, www.lindecanada.com
Linde Canada Limitée est un membre de The Linde Group. Linde est un nom commercial utilisé par les entreprises au sein
de The Linde Group. Le logo Linde est une marque de commerce de The Linde Group. ©The Linde Group 2014.
CARBON STEEL WELDING WIRE FIL DE SOUDAGE EN ACIER AU CARBONE
WARNING
Do not remove or cover this warning.
Protect yourself and others.
Read and understand this information.
Electric shock can kill.
MISE EN
GARDE
Ne pas retirer ou couvrir cette mise en garde
Se protéger et protéger les autres
Lire et bien comprendre ces informations
Les décharges électriques peuvent
causer la mort
MADE IN CANADA
FABRIQUÉ AU CANADA
ISO 14001-2004
LindeSolidarc115™
PremiumMIGWeldingWire.
FildesoudageMIGdequalitésupérieure.
Tore-order:
Pourcommander:
www.shop.lindecanada.com1-888-256-7359
GladiatorIIWeldingHelmet.
Sleekhelmetstyle,lightweight,
streamlinedandbalanced.
External ADF control for easy
adjustment without helmet removal
Front loading filter and cover plate
Patented sensor bar for enhanced
switching stability
High quality distortion-free optics
Gladiator II Welding Helmet is:
1. Certified for overhead welding
2. 3 year warranty
3. SWISS Made
4. All electric arc welding processes, prohibited for laser welding
5. Protection level: DIN4 (light mode)
DIN5 – DIN 13 (dark mode)
6. Field of view: 1.97 x 3.94“
THANK YOU FOR YOUR TIME – Give out Chocolate
This side faces counter salesmen
Looking
for a
w
elding
helm
et?
W
ant a
3
year w
arranty?
W
ould
you
like
a
larger view
ing
area?
Ask
m
e
about our helm
et and
receive
a
CHOCOLATE!
S
W
I
S
S
Looking for a welding helmet?
Want a 3 year warranty?
Would you like a larger viewing area?
Ask me about our helmet and receive a
CHOCOLATE!
S
W
I
S
S
Looking for a welding helmet?
Want a 3 year warranty?
Would you like a larger viewing area?
Ask me about our helmet and receive a
CHOCOLATE!
S
W
I
S
S

8. 8/8
Brochures
06 07The efficient way to modernize your protective gas supply schemeHeat treatment laboratory and metallography
Low-temperature laboratory
This special laboratory contains equipment for low-temperature
treatments, for instance to transform retained austenite at
temperatures of around -130 ºF (-90 ºC) or increase the wear resistance
of tool steels at controlled cryogenic temperatures as low as -292 ºF
(-180 ºC), with subsequent tempering to 1112 ºF (600 ºC).
Metallography
We have a fully equipped metallography lab to analyze the results of
customer tests. The laboratory staff create and analyze macrosections
and microsections and carry out a variety of hardness tests. Other
services offered by the lab include scanning electron microscopy and
material analyses.
On-site demonstration and commissioning
We offer a full service package covering tests, demonstrations
and commissioning of Linde processes at your plant. These services
are delivered by our dedicated application engineers, who draw
on their practical experience and technical know-how to meet your
individual needs.
Targeted improvements through process simulations
Engineers at our Application Centers are responsible for developing
new gas supply systems for heat treatment processes and improving
the control systems of existing processes. For this purpose as well as
testing and demonstrations, the following furnace types are available:
→ Mesh belt furnace
→ Multi-purpose chamber furnace
→ Pit furnace
→ High-temperature pusher type furnace operating at up to 2642 ºF
(1450 ºC) for sintering processes
→ Salt spray chamber for salt spray tests according to DIN EN ISO 9227
All furnaces are equipped with the latest control technology and
universal gas inlets to simulate every conceivable furnace atmosphere
with the utmost precision. We have installed a comprehensive
metrology system for monitoring and analysis, and a plasma cleaning
system is used to prepare samples. The facility’s process control
computers are also capable of simulating your heat treatment
processes. We will gladly send you the log files detailing the optimal
carburization, nitriding or annealing conditions. The vast experience
of our heat treatment experts is, however, our biggest success factor.
They are the people who provide the application-specific advice to
help you make your production more cost-effective.
Heat treatment laboratory and
metallography. Consulting based
on detailed data.
Comparison of strip material 1.4841 from a continuous furnace with (left) and without (right) SINTERFLEX® atmosphere control
Linde can help plan or update the protective gas supply system
of your furnaces, and our engineers can support you every step
of the way. Our range of services includes advice on the most
suitable industrial gases, concept development, professional project
execution and hardware start-up at your site.
We can plan and build your system for generating, measuring and
controlling the protective atmosphere for your furnace or cryogenic
application. As well as standard solutions, we also provide custom
designs adapted to your production facility.
The efficient way to modernize your
protective gas supply scheme. With our
expert engineers.
The factors that need to be considered when planning a protective
gas supply scheme include the dimensions of the pipes, the
required components, the measurement and control systems, the
PLC and, where required, the analysis tools. Other options include
data logging and connection to master control systems for quality
assurance. Furthermore, we can equip your new furnace with the
latest in protective gas control technology or integrate it with existing
production lines as part of a plant modernization project.
It goes without saying that Linde technologies and equipment comply
with all current standards and guidelines. We are the best choice if you
are looking for the efficiency gains of an all-inclusive, industrial gas
and engineering package.
Achieving best results
in heat treatment.
With our leading solutions for furnace atmosphere
gas supply, generation, control and stirring as well as
for sub-zero treatment.
Achieving best results
in heat treatment.
With our leading solutions for furnace atmosphere
gas supply, generation, control and stirring as well as
for sub-zero treatment.