1. Project #1: Real time monitoring system for Pedal automated line and online display of each station status, Downtime, Number of reject at
each station, hourly production and etc…
Fig 1 of 1
2. Project #2: Real time monitoring system for Machine vision data and calculate all statistical information online. (Setup communication
from RS232 port to Wi-Fi unites to get data transfer). (Lean six Sigma implementation using to detect online variation of parts)
Fig 1 of 2
4. Project #3: Real time Production Yield monitoring system for Pedal line and planning to implement all plants automated line with big display.
Fig 1 of 1
5. Project #4: Real time Data collecting and analysis of Banner vision camera. Statistical data for current running production parts to
Troubleshoot base on data
Fig 1 of 3
8. Project #5: Wi-Fi Multimeter for detect (Vdc, Vac, A, Ohm, Hz….etc) in the any equipment running in the production machine and monitor
using below application. Oscilloscope can detect the current problem but spike or effect from other machine we can easily troubleshoot
with Wi-Fi Multimeter. (Base on save data, check the what time changed and variation happened)
Fig 1 of 2
10. Project #6: Pedal automated line Omron servo motor assembly torque and displacement monitoring any inconsistent torque during
Production. Calibrated using load cell monitoring to correlated with Torque of each servo motor.
Fig 1 of 1
11. Project #7: Pedal automated line housing heatstake Keyence vision data collection help to troubleshoot failure mode. How many parts
Rejects? Which vision check fails? Get online Statistical information of each failure vision check.
Fig 1 of 2
13. Project #8: Pedal automated line Heatstake Parker Compax3 servo motor torque and displacement monitoring any inconsistent torque
during Production. Record each final displacement of heatstake servo with Torque.
Fig 1 of 1
14. Project #9: Resistance element test machine with each resistance check the resistance within the correct tolerance Ohms.
Fig 1 of 1
16. Project #11: Accelerator Pedal Permissible reset time testing application. (WOT to Idle travel)
Fig 1 of 1
17. Project #12: Pedal 2D mark scanner checking station, which connected with database. Poke York of detection and voice sound with each parts.
Fig 1 of 1
18. Project #13: Test lab monitoring of life cycle test of Pedal sensor out put within Temperature and Humidity profile.
Fig 1 of 1
19. Project #14: Thermotron Humidity chamber setup for IP address data log to PC every 60 sec.
Fig 1 of 2
