HYBSUN SOLAR CO.,LTD is a Chinese company founded in 2005 that engineers, manufactures, and sells solar powered water pumping systems. The document provides details on HYBSUN's product range including solar centrifugal pumps, helical rotor pumps, and hybrid AC/DC pumps with power ratings from 1.1 kW to 5.5 kW. Performance data and specifications are given for each model.
Shenzhen Solartech Renewable Energy Co., Ltd is a world’s leading solution provider of solar agriculture and water conservancy; a professional manufacturer of solar pumping systems, solar sea water desalination system, solar water-saving irrigation system, solar pumps, solar pumping inverters and solar on-grid inverters. The products are widely used in solar agricultural and forestry irrigation, solar desert control, solar pasture irrigation, solar daily water supply, solar sea water desalination, solar city water landscape and so on.
Design and implementation of a water level and pump motor controlling system(...Zabir Arkam
Drinking pure water and using clean water are more important for human body. It is observed commonly in our country that people are not aware of using water in households. Besides the natural sources of clean and pure water on the surface are decreasing day by day. On the other hand, the demand for clean and pure water is increasing due to rapid population growth in our country. It is observed in households that much water is being wasted due to overflow in water tank. Besides, much electric power is being lost due to lack of water pump controlling system. In this project, a calculation has been shown on economic effect due to overflow of water. To address the problem, a water level and water pump controlling system has been designed. In the development of the system a float switch, two indicator lamps, a relay, a magnetic contactor and an alarm have been used. In this project, relay plays an important role in safety which keeps the whole system out of power when accidently or due system fault the water is electrified. Though whole system goes out of power, relay will remain active by taking power from supply though itself. The system has gone under many trials. Finally, a successful and effective operation has been observed under different environments. The main advantages of the sophisticated system are environmentally friendliness, easiness of installation and maintenance, cost effectiveness and availability of its parts.
The Willett Pump is a vertical, single-acting positive displacement ram pump that is designed to pump difficult and abrasive sludge and slurries. It offers long life, low maintenance, and high energy efficiency. New and refurbished pumps are available in a range of sizes to suit various flow rate, pressure, and power requirements. The Willett Pump also has retrofit options available to enhance pumps with new controls, coatings, and conversion kits.
Water Balance Study is carried out for a Super Thermal Power plant as a part of the M. Tech final
project which is published in the Sustainable Water Resources Management (Springer) Journal (https://
doi.org/10.1007/s40899-020-00487-4).
CESC Limited is a century old power generation company serving over 2.1 million consumers in and around Kolkata. It has 4 coal-based thermal power plants with a total capacity of 1,225 MW. One of CESC's power plants is the Titagarh Generating Station, commissioned in 1988 with a capacity of 244 MW.
Titagarh station implements various measures for zero discharge of effluent and conservation of water usage. This includes modifying systems for bottom ash handling, auxiliary cooling, and process water to enable recycling of effluent. Other initiatives include installing a cooling tower, implementing root zone technology for sewage treatment, and reducing DM water usage by replacing steam with compressed air. These efforts have
This document provides specifications for several industrial lifting machines:
- The ISV-60 lifts loads from 50-100kg using a 1HP motor and travels 12m.
- The IW-140 lifts up to 450kg with motors from 0.5-1HP and reductions from 41:1-58:1.
- The IW-150 lifts up to 630kg with motors up to 1.6HP and reductions from 32:1-58:1.
- Additional models listed include the IW-315, IW-190N, SC-140, and IS-85H, each specifying load capacities, speeds, motors, pulleys, and dimensions.
This document provides specifications for a solar pumping project in Baladweyne, Somalia. It includes details of the system components, layout, wiring diagram, and performance data. The key components are a PSk2-40 solar pump controller, CS-G200-24/4 surface pump unit, and 144 photovoltaic panels totalling 46,800Wp. The system is designed to pump up to 3,000m3 of water per day from a water source at 1m depth to an irrigation system with a maximum pressure of 12m and flow rate of 499m3/h. Daily and monthly output values are provided based on local weather data.
This document provides an overview of basic hydraulic principles and components. It explains that hydraulics uses pressurized liquids to transmit and control power. The key sections of a hydraulic system are the drive (cylinders or motors), energy control (valves), and power supply (pump, reservoir, etc.). Pascal's law of liquid pressure transmission is discussed. Common hydraulic components like pumps, motors, filters and valves are described along with their functions, operating principles and symbols.
Shenzhen Solartech Renewable Energy Co., Ltd is a world’s leading solution provider of solar agriculture and water conservancy; a professional manufacturer of solar pumping systems, solar sea water desalination system, solar water-saving irrigation system, solar pumps, solar pumping inverters and solar on-grid inverters. The products are widely used in solar agricultural and forestry irrigation, solar desert control, solar pasture irrigation, solar daily water supply, solar sea water desalination, solar city water landscape and so on.
Design and implementation of a water level and pump motor controlling system(...Zabir Arkam
Drinking pure water and using clean water are more important for human body. It is observed commonly in our country that people are not aware of using water in households. Besides the natural sources of clean and pure water on the surface are decreasing day by day. On the other hand, the demand for clean and pure water is increasing due to rapid population growth in our country. It is observed in households that much water is being wasted due to overflow in water tank. Besides, much electric power is being lost due to lack of water pump controlling system. In this project, a calculation has been shown on economic effect due to overflow of water. To address the problem, a water level and water pump controlling system has been designed. In the development of the system a float switch, two indicator lamps, a relay, a magnetic contactor and an alarm have been used. In this project, relay plays an important role in safety which keeps the whole system out of power when accidently or due system fault the water is electrified. Though whole system goes out of power, relay will remain active by taking power from supply though itself. The system has gone under many trials. Finally, a successful and effective operation has been observed under different environments. The main advantages of the sophisticated system are environmentally friendliness, easiness of installation and maintenance, cost effectiveness and availability of its parts.
The Willett Pump is a vertical, single-acting positive displacement ram pump that is designed to pump difficult and abrasive sludge and slurries. It offers long life, low maintenance, and high energy efficiency. New and refurbished pumps are available in a range of sizes to suit various flow rate, pressure, and power requirements. The Willett Pump also has retrofit options available to enhance pumps with new controls, coatings, and conversion kits.
Water Balance Study is carried out for a Super Thermal Power plant as a part of the M. Tech final
project which is published in the Sustainable Water Resources Management (Springer) Journal (https://
doi.org/10.1007/s40899-020-00487-4).
CESC Limited is a century old power generation company serving over 2.1 million consumers in and around Kolkata. It has 4 coal-based thermal power plants with a total capacity of 1,225 MW. One of CESC's power plants is the Titagarh Generating Station, commissioned in 1988 with a capacity of 244 MW.
Titagarh station implements various measures for zero discharge of effluent and conservation of water usage. This includes modifying systems for bottom ash handling, auxiliary cooling, and process water to enable recycling of effluent. Other initiatives include installing a cooling tower, implementing root zone technology for sewage treatment, and reducing DM water usage by replacing steam with compressed air. These efforts have
This document provides specifications for several industrial lifting machines:
- The ISV-60 lifts loads from 50-100kg using a 1HP motor and travels 12m.
- The IW-140 lifts up to 450kg with motors from 0.5-1HP and reductions from 41:1-58:1.
- The IW-150 lifts up to 630kg with motors up to 1.6HP and reductions from 32:1-58:1.
- Additional models listed include the IW-315, IW-190N, SC-140, and IS-85H, each specifying load capacities, speeds, motors, pulleys, and dimensions.
This document provides specifications for a solar pumping project in Baladweyne, Somalia. It includes details of the system components, layout, wiring diagram, and performance data. The key components are a PSk2-40 solar pump controller, CS-G200-24/4 surface pump unit, and 144 photovoltaic panels totalling 46,800Wp. The system is designed to pump up to 3,000m3 of water per day from a water source at 1m depth to an irrigation system with a maximum pressure of 12m and flow rate of 499m3/h. Daily and monthly output values are provided based on local weather data.
This document provides an overview of basic hydraulic principles and components. It explains that hydraulics uses pressurized liquids to transmit and control power. The key sections of a hydraulic system are the drive (cylinders or motors), energy control (valves), and power supply (pump, reservoir, etc.). Pascal's law of liquid pressure transmission is discussed. Common hydraulic components like pumps, motors, filters and valves are described along with their functions, operating principles and symbols.
The document discusses a proposed water supply project by V V Water Company. It outlines that the project would involve developing water resources from a well field with infrastructure to transport water via pipeline. It evaluates the project based on three criteria: deliverability, feasibility, and affordability. For deliverability, it indicates the water could be produced in large volumes continuously from the well field. For feasibility, it describes the infrastructure plan to transport water from the well field to the point of storage and sale. For affordability, it finds the cost of water from this project would be lower than competing systems and available regardless of conditions like drought.
This document is a project report on the manufacturing of a hydraulic robotic arm. It was submitted by Bijoy Mondal to fulfill the requirements for a diploma in mechanical engineering from Elitte Institute of Engineering and Management. The report details the components of the robotic arm including hydraulic cylinders, fluid lines, arms, grippers, a chassis, motor, and wheels. It also discusses the principles of hydraulic systems, classification of hydraulic robots, materials used, and the advantages and disadvantages of the design.
The document provides an overview of basic hydraulic principles and components. It explains that hydraulics involves using pressurized liquids to transmit power and describes the three main sections of a hydraulic system: the drive section which includes cylinders and motors, the energy control section with valves, and the power supply section with pumps, reservoirs and other components. It then discusses key hydraulic concepts like Pascal's principle and displacement transmission. Finally, it outlines different types of hydraulic pumps including gear, vane and screw pumps as well as filters, coolers and other components.
The document provides specifications for the SWIMMEY series of electric self-priming pumps for swimming pools. The pumps are designed for maximum reliability in circulating and filtering chlorinated swimming pool water. They feature closed, ventilated motors rated for continuous duty in temperatures up to 40°C. A range of pump models are detailed with dimensions, weights, hydraulic performance specifications, and electrical requirements.
This document contains information about solar pumping systems provided by Powerician Technology Co., LTD. It includes descriptions of the components of a solar pumping system including solar panels, inverters/controllers, pumps, pipes, and storage. It also provides specifications for various solar AC pump kits ranging from 3 cubic meters per hour to 30 cubic meters per hour that include details on the AC pump model, inverter, solar panels, power ratings, and dimensions. The document indicates the company reserves the right to modify product parameters without notice and to take the real products as standard.
This document provides product information and specifications for the ES Series submersible pumps from etechpumps.com. The key points are:
- The ES Series are stainless steel close-coupled submersible pumps available in single or three phase models for water distribution, pressure boosting, dewatering, irrigation and other applications.
- Pump specifications include flow rates up to 7.5 m3/h at 50Hz and 9 m3/h at 60Hz, heads up to 88 meters, maximum immersion depth of 20 meters, and maximum working pressure of 10 bars.
- Motor specifications include single phase voltages of 220-240V at 50Hz and 220-230V at 60Hz
This document provides information on various pump models from Pedrollo including:
- Multistage vertical electric pumps (MK series) for lifting plants with performance data up to 24 m3/h flow and 252 m head.
- Self-priming pumps (KPO, KPW, KSM series) for swimming pools with large prefilters and performance data listed.
- Single stage close coupled centrifugal electric pumps (IR series) and gear pumps (CFP, CF series) with listed ports, power ratings, and performance curves.
The document gives an overview of several pump lines from Pedrollo along with their applications and specifications.
Pkydrip water pump and solar power pump for drip irrigationjeff advg
Shijiazhuang Kesun Trading Co. Ltd produces various water pumps including diesel pumps, solar submersible pumps, screw pumps, centrifugal pumps, and well submersible pumps. The document provides product names, item numbers, specifications, and pictures for each type of pump. The pumps are used for agricultural irrigation, landscaping, greenhouses, sports fields, and water supply.
https://youtu.be/lbJpUx5TwLI
This video talks about conservation of water in Indian Agriculture for sustainability with innovative technologies and aims at doubling the farmers income and improve his overall economic status.
It also improves the water use efficiencies of the Lift Irrigation Project of the Water Resources Department by adopting modern Technology.
The Project covers 24000Ha.
This has given a new hope for various Water Resource Departments across India to think about improving water Use efficiency and there by double the Irrigable Area.
The Potential irrigation stands at 140Mha and will increase to 175Mha after interlinking of River Basins. The Agriculture Department is targeting 64Mha and it has achieved 13Mha as on date while the Water Resources Department is targeting 75Mha and it has just made a beginning.
The Market size for Micro Irrigation under WRD is 30Lakh Crores (360Bn.USD)
This document describes the design and analysis of a Pelton wheel to generate 400 Watts of power. A Pelton wheel is an impulse turbine that converts pressure head into velocity head. The design calculations include determining the input and output power, number of buckets, speed ratio, belt length, and efficiency. The designed Pelton wheel has a jet diameter of 0.0254 m and runner diameter of 0.254 m. Testing showed the wheel has a hydraulic efficiency of 96.35% and generates an output power of 400 Watts, with only a 1.092% difference from the theoretical calculations. In conclusion, the Pelton wheel design is simple and cost-effective, making it suitable for generating power from small heads of water.
This document describes a 10MW hydro power plant located in Drung Tangmarg, Jammu and Kashmir. It discusses the key components of hydro power plants including the dam and reservoir, spillway, forebay, surge tank, penstock, trash rack, power house, and circuit breakers. It provides details on the specific components used at this power plant, such as the Francis turbine, 39,176 KVA synchronous generator, main inlet valve, bypass valve, guide vanes, and draft tube. The conclusions emphasize the importance of tapping small hydro power potential across India to support the country's development goals.
hydro-electricity project for BSC. studentsp7077529775
The document provides information about hydroelectric power plants including definitions, basic principles, components, and functions. It discusses:
1) Hydroelectric power plants generate electricity by harnessing the potential energy of water stored at high elevations and converting it through a turbine into electrical energy.
2) Key components include a dam to store water, penstocks to channel water to turbines, and a generator driven by the turbine to produce electricity.
3) The selection of a suitable site considers factors like adequate water supply, terrain for water storage, transportation access, and proximity to energy demand centers.
The Grundfos DW pumps form part of a complete range of wastewater and sewage
handling products. Like all Grundfos products the DW pump series offer unique cus-
tomer benefits, making them the natural choice for any job where raw water needs to
be pumped - whether from construction sites, mining pits, excavations, or flooded base-
ments, etc.
IRJET - A Review on Design and Analysis of Automatic Oil Filling PumpIRJET Journal
This document summarizes the design and analysis of an automatic oil filling pump. It discusses how current manual oil filling processes for ceramic tile production are time-consuming and require high pressure. The goal of this project is to design a hydraulic system using an automatic pump to simplify the oil filling process. The proposed system would use an electric motor, pump, piping and valves to automatically and uniformly fill oil between the die and rubber cover. Mathematical models and simulation software were used to analyze the design. It was concluded that the automatic oil filling pump could efficiently address current issues and be useful for ceramic and other manufacturing industries.
This patent application describes methods and systems for using electric piezopumps instead of accumulators to provide hydraulic power to subsea equipment. It involves a hydraulic directional control manifold connected to multiple electric piezopumps controlled by a piezopump controller. The piezopumps are operated in different combinations to generate and direct hydraulic power for linear actuators using localized closed-loop hydraulic fluid, providing an alternative to traditional accumulators for deepwater applications.
This document summarizes solar photovoltaic water pumping systems. It describes the key components of solar PV pumping systems including the solar panels, motor, pump, and storage. The main applications are listed as village water supply, livestock watering, and irrigation. Pros and cons are provided for different pump types including submersible pumps, surface pumps, and floating pumps. Guidelines are given for properly sizing a solar pumping system to match the water demand and availability. The performance and efficiency of solar pumping technology is discussed.
This document contains operational parameters and performance data for various units in a mineral processing flowsheet, including a ball mill, hydrocyclone, and flotation column. It provides details like unit sizes, throughput rates, efficiencies, and flow rates at different points throughout the flowsheet.
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
Bokaro Power Supply Company Pvt. Ltd. (BPSCL) generates 302MW of power and 660 tons per hour of steam as a joint venture between SAIL and DVC. It provides power and steam to Bokaro Steel Plant. The power plant has 9 boilers and 7 turbine generators. It uses coal, blast furnace gas, and coke oven gas as fuels. The plant has a coal handling plant, water treatment plant, and other mechanical and electrical operations to generate and distribute steam and power. Rahul Raj completed his industrial training at BPSCL and submitted this report as partial fulfillment of his Bachelor of Engineering degree.
The document discusses a proposed water supply project by V V Water Company. It outlines that the project would involve developing water resources from a well field with infrastructure to transport water via pipeline. It evaluates the project based on three criteria: deliverability, feasibility, and affordability. For deliverability, it indicates the water could be produced in large volumes continuously from the well field. For feasibility, it describes the infrastructure plan to transport water from the well field to the point of storage and sale. For affordability, it finds the cost of water from this project would be lower than competing systems and available regardless of conditions like drought.
This document is a project report on the manufacturing of a hydraulic robotic arm. It was submitted by Bijoy Mondal to fulfill the requirements for a diploma in mechanical engineering from Elitte Institute of Engineering and Management. The report details the components of the robotic arm including hydraulic cylinders, fluid lines, arms, grippers, a chassis, motor, and wheels. It also discusses the principles of hydraulic systems, classification of hydraulic robots, materials used, and the advantages and disadvantages of the design.
The document provides an overview of basic hydraulic principles and components. It explains that hydraulics involves using pressurized liquids to transmit power and describes the three main sections of a hydraulic system: the drive section which includes cylinders and motors, the energy control section with valves, and the power supply section with pumps, reservoirs and other components. It then discusses key hydraulic concepts like Pascal's principle and displacement transmission. Finally, it outlines different types of hydraulic pumps including gear, vane and screw pumps as well as filters, coolers and other components.
The document provides specifications for the SWIMMEY series of electric self-priming pumps for swimming pools. The pumps are designed for maximum reliability in circulating and filtering chlorinated swimming pool water. They feature closed, ventilated motors rated for continuous duty in temperatures up to 40°C. A range of pump models are detailed with dimensions, weights, hydraulic performance specifications, and electrical requirements.
This document contains information about solar pumping systems provided by Powerician Technology Co., LTD. It includes descriptions of the components of a solar pumping system including solar panels, inverters/controllers, pumps, pipes, and storage. It also provides specifications for various solar AC pump kits ranging from 3 cubic meters per hour to 30 cubic meters per hour that include details on the AC pump model, inverter, solar panels, power ratings, and dimensions. The document indicates the company reserves the right to modify product parameters without notice and to take the real products as standard.
This document provides product information and specifications for the ES Series submersible pumps from etechpumps.com. The key points are:
- The ES Series are stainless steel close-coupled submersible pumps available in single or three phase models for water distribution, pressure boosting, dewatering, irrigation and other applications.
- Pump specifications include flow rates up to 7.5 m3/h at 50Hz and 9 m3/h at 60Hz, heads up to 88 meters, maximum immersion depth of 20 meters, and maximum working pressure of 10 bars.
- Motor specifications include single phase voltages of 220-240V at 50Hz and 220-230V at 60Hz
This document provides information on various pump models from Pedrollo including:
- Multistage vertical electric pumps (MK series) for lifting plants with performance data up to 24 m3/h flow and 252 m head.
- Self-priming pumps (KPO, KPW, KSM series) for swimming pools with large prefilters and performance data listed.
- Single stage close coupled centrifugal electric pumps (IR series) and gear pumps (CFP, CF series) with listed ports, power ratings, and performance curves.
The document gives an overview of several pump lines from Pedrollo along with their applications and specifications.
Pkydrip water pump and solar power pump for drip irrigationjeff advg
Shijiazhuang Kesun Trading Co. Ltd produces various water pumps including diesel pumps, solar submersible pumps, screw pumps, centrifugal pumps, and well submersible pumps. The document provides product names, item numbers, specifications, and pictures for each type of pump. The pumps are used for agricultural irrigation, landscaping, greenhouses, sports fields, and water supply.
https://youtu.be/lbJpUx5TwLI
This video talks about conservation of water in Indian Agriculture for sustainability with innovative technologies and aims at doubling the farmers income and improve his overall economic status.
It also improves the water use efficiencies of the Lift Irrigation Project of the Water Resources Department by adopting modern Technology.
The Project covers 24000Ha.
This has given a new hope for various Water Resource Departments across India to think about improving water Use efficiency and there by double the Irrigable Area.
The Potential irrigation stands at 140Mha and will increase to 175Mha after interlinking of River Basins. The Agriculture Department is targeting 64Mha and it has achieved 13Mha as on date while the Water Resources Department is targeting 75Mha and it has just made a beginning.
The Market size for Micro Irrigation under WRD is 30Lakh Crores (360Bn.USD)
This document describes the design and analysis of a Pelton wheel to generate 400 Watts of power. A Pelton wheel is an impulse turbine that converts pressure head into velocity head. The design calculations include determining the input and output power, number of buckets, speed ratio, belt length, and efficiency. The designed Pelton wheel has a jet diameter of 0.0254 m and runner diameter of 0.254 m. Testing showed the wheel has a hydraulic efficiency of 96.35% and generates an output power of 400 Watts, with only a 1.092% difference from the theoretical calculations. In conclusion, the Pelton wheel design is simple and cost-effective, making it suitable for generating power from small heads of water.
This document describes a 10MW hydro power plant located in Drung Tangmarg, Jammu and Kashmir. It discusses the key components of hydro power plants including the dam and reservoir, spillway, forebay, surge tank, penstock, trash rack, power house, and circuit breakers. It provides details on the specific components used at this power plant, such as the Francis turbine, 39,176 KVA synchronous generator, main inlet valve, bypass valve, guide vanes, and draft tube. The conclusions emphasize the importance of tapping small hydro power potential across India to support the country's development goals.
hydro-electricity project for BSC. studentsp7077529775
The document provides information about hydroelectric power plants including definitions, basic principles, components, and functions. It discusses:
1) Hydroelectric power plants generate electricity by harnessing the potential energy of water stored at high elevations and converting it through a turbine into electrical energy.
2) Key components include a dam to store water, penstocks to channel water to turbines, and a generator driven by the turbine to produce electricity.
3) The selection of a suitable site considers factors like adequate water supply, terrain for water storage, transportation access, and proximity to energy demand centers.
The Grundfos DW pumps form part of a complete range of wastewater and sewage
handling products. Like all Grundfos products the DW pump series offer unique cus-
tomer benefits, making them the natural choice for any job where raw water needs to
be pumped - whether from construction sites, mining pits, excavations, or flooded base-
ments, etc.
IRJET - A Review on Design and Analysis of Automatic Oil Filling PumpIRJET Journal
This document summarizes the design and analysis of an automatic oil filling pump. It discusses how current manual oil filling processes for ceramic tile production are time-consuming and require high pressure. The goal of this project is to design a hydraulic system using an automatic pump to simplify the oil filling process. The proposed system would use an electric motor, pump, piping and valves to automatically and uniformly fill oil between the die and rubber cover. Mathematical models and simulation software were used to analyze the design. It was concluded that the automatic oil filling pump could efficiently address current issues and be useful for ceramic and other manufacturing industries.
This patent application describes methods and systems for using electric piezopumps instead of accumulators to provide hydraulic power to subsea equipment. It involves a hydraulic directional control manifold connected to multiple electric piezopumps controlled by a piezopump controller. The piezopumps are operated in different combinations to generate and direct hydraulic power for linear actuators using localized closed-loop hydraulic fluid, providing an alternative to traditional accumulators for deepwater applications.
This document summarizes solar photovoltaic water pumping systems. It describes the key components of solar PV pumping systems including the solar panels, motor, pump, and storage. The main applications are listed as village water supply, livestock watering, and irrigation. Pros and cons are provided for different pump types including submersible pumps, surface pumps, and floating pumps. Guidelines are given for properly sizing a solar pumping system to match the water demand and availability. The performance and efficiency of solar pumping technology is discussed.
This document contains operational parameters and performance data for various units in a mineral processing flowsheet, including a ball mill, hydrocyclone, and flotation column. It provides details like unit sizes, throughput rates, efficiencies, and flow rates at different points throughout the flowsheet.
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
Bokaro Power Supply Company Pvt. Ltd. (BPSCL) generates 302MW of power and 660 tons per hour of steam as a joint venture between SAIL and DVC. It provides power and steam to Bokaro Steel Plant. The power plant has 9 boilers and 7 turbine generators. It uses coal, blast furnace gas, and coke oven gas as fuels. The plant has a coal handling plant, water treatment plant, and other mechanical and electrical operations to generate and distribute steam and power. Rahul Raj completed his industrial training at BPSCL and submitted this report as partial fulfillment of his Bachelor of Engineering degree.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
Profiles of Iconic Fashion Personalities.pdfTTop Threads
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Dive into this presentation and learn about the ways in which you can buy an engagement ring. This guide will help you choose the perfect engagement rings for women.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women MagazineCIOWomenMagazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...Herman Kienhuis
Presentation by Herman Kienhuis (Curiosity VC) on developments in AI, the venture capital investment landscape and Curiosity VC's approach to investing, at the alumni event of Amsterdam Business School (University of Amsterdam) on June 13, 2024 in Amsterdam.
HR search is critical to a company's success because it ensures the correct people are in place. HR search integrates workforce capabilities with company goals by painstakingly identifying, screening, and employing qualified candidates, supporting innovation, productivity, and growth. Efficient talent acquisition improves teamwork while encouraging collaboration. Also, it reduces turnover, saves money, and ensures consistency. Furthermore, HR search discovers and develops leadership potential, resulting in a strong pipeline of future leaders. Finally, this strategic approach to recruitment enables businesses to respond to market changes, beat competitors, and achieve long-term success.
1. THE SOLAR WATER
PUMPING EXPERT
Solar Water
Pumping System
HYBSUN SOLAR CO.,LTD
Add: Shanshi Industrial Zone,Wenling,Zhejiang,317500,P.R.China
E-mail: Info@hybsun.com Website: www.hybsun.com
Contact: +86 18705861702
2. ABOUT HYBSUN
Founded in China during 2005 HYBSUN SOLAR
CO.,LTD has pioneered, innovated and excelled
in the engineering ,manufacturing and sales of
solar powered water pumping system. which are
applied to a lot of fields, such as agriculture,
forestry and irrigation water,living water,
industrial water and pumping stations, municipal
engineering, building water supply, We are proud
of improved irrigation is allowing farmers to
boost yields, farm income from high value crops
and every home could drink clean water based
on eco-friendly, low cost.
HYBSUN guides new energy, creates new life.
CONTENTS
www.hybsun.com 1
023HR Solar Helical Rotor Pump
3SC Solar Centrifugal Pump 03
4SC Solar Helical Rotor Pump 04
4SCH Solar Hybrid AC/DC Pump 05-06
6SCH Solar Hybrid AC/DC Pump 07-08
8SCH&10SCH Solar Hybrid AC/DC Pump 09
SQB Solar Peripheral Pump 10
SCPM Solar Centrifugal Pump 11
SJET Solar Jet Pump 12
SSP Solar Swimming Pool Pump 13
WATER SUPPLY ANIMAL BREEDING IRRIGATION LIVING WATER