2. The tower of the computer has been opened, and the power supply has been put into place.
3. The CPU has been put into place on the motherboard and in the image you can see the heat sink being
placed over it.
4. In the image above we can see a RAM memory being inserted into the slots of the motherboard.
5. In the image above we can see either the Video card or a Audio Card being installed into the slots on
the back of the tower.
6. In the image above we can see the wireless NIC being installed this will enable the computer to access
the network wirelessly.
7. The slots for the front of the tower have been filled with various different hardware from the Hard disk
drive to the disk drive, they all connect to the motherboard through cables.
8. In this image we can see the motherboard with all of the components connected and it also shows the
cables coming from the hardware to the motherboard slots.
9. All of the hardware have been installed into the tower and the motherboard and now the case is being
closed.
10. This is the wireless NIC which allows the computer to access the network wirelessly.
11. The back of the tower showing all of the video card slots and audio card slots which allows the computer
to output through Monitors and speakers and input for the computers through keyboards and mice.
12. Completed computer, all of the hardware has been installed and the computer has been powered on.