Muffle furnace for annealing of special alloys under protective gas

1. www.solo.swiss
SOLO Swiss SA
Grandes-Vies 25, 2900 Porrentruy, Switzerland
Tel. +41 32 465 96 00
Fax +41 32 465 96 05
mail@soloswiss.com
www.soloswiss.com
REF. ELE9106
Muffle furnace for annealing of special alloys under protective gas
Furnace type: SOLO Swiss 127-25/360
Process: Annealing
Sector: Metallurgy
Country: Switzerland
Technical data
Working Temp.: 750 °C
Heated length: 3600 mm
Channel section: 350 x 250 mm
Power of heating zones: 5 x 15,3 kW
Atmospheres: N2, Ar, H2
Composition: preparation and input/output table, loading system of templates in the muffle, furnace
frame, heating part, muffle with three mixing systems « turbo », treatment gas processing and
distribution, security system for work with flammable gas, control panel with HYDROBELT management
Advantages
Horizontal loading to avoid building modifications
Locking of the muffle for vacuum-tight and pressure tight operations at all temperatures of the furnace
Load cooling by atmosphere gas flow over the entire length of the muffle
Gas consumption reduced by the use of flow-regulated pressure controls
Internal agitation by 3 turbos for temperature uniformity over the entire length of the muffle for a
hardness and structure uniformity of long parts up to 3,5 m
Complete management of the furnace and its peripherals by a central control developed by AXRON Swiss
Technology with remote control units
Automatic control of treatment cycles (vacuum, heating, holding, cooling, ...). Storage of full treatment
cycles on PC. Load management system with remote online maintenance