The document provides information about a conveyor belt furnace for disks brazing and sintering from SOLO Swiss SA. The furnace, a SOLO Swiss 322-30/200, has a working temperature of 1150°C within a working zone that is 300mm wide, 30mm high, and 2000mm long. It has a power of 3 x 16 kW for the heating zone and operates under a cracked ammonia atmosphere. The furnace allows for homogeneous hardening of parts, a clean surface without oxidation, rapid conditioning, safe working conditions, and continuous or step-by-step belt advancement.

1. www.solo.swiss
SOLO Swiss SA
Grandes-Vies 25, 2900 Porrentruy, Switzerland
Tel. +41 32 465 96 00
Fax +41 32 465 96 05
mail@soloswiss.com
www.soloswiss.com
Conveyor belt furnace for disks brazing and sintering
REF. TOE9101
Furnace type: SOLO Swiss 322-30/200
Process: Hardening
Sector: Tools
Country: Portugal
Technical data
Working Temp.: 1150 °C
Working zone: width 300 mm x height 30 mm x length 2000 mm
Power of heating zone with thyristor: 3 x 16 kW
Atmosphere: cracked ammonia (N2+3H2)
Advantages
Homogeneous hardening of the parts
Perfectly clean surface without any trace of oxidation
Rapid conditioning
Working under maximum safety conditions
Continuous or step by step belt advance