1. www.Lemko.comInfo@Lemko.com
Lemko Node1TM
4G core network solutions deliver
the benefits of tomorrow’s network for today’s opera-
tors. The all-IP, packet based solution places the
functionality of an entire cellular system at each cell
site, in other word, those products are as the network
function virtualization (NFV) and as the software de-
fined network (SDN), thus eliminating all of the chan-
nel based backhaul. This revolutionary design deliv-
Lemko’s Node1 meets the goals and vision of the industry’s fourth generation core net-
work. The fully distributed, all IP based, software design delivers low data latency
while supporting the high levels of data traffic demanded by users, combined with the
high quality voice services they expect.
It simplifies network design, offering a flat architecture with peer-to-peer communica-
tion. Most important, Node1 gives you the lowest total cost of ownership from the time
it is purchased and then throughout every year it is operational.
4G Core Network
Node1
L8306 LTE (TDD/FDD)
Power :
-48 V DC / 110 & 220 V AC
Typical Consumption 0.5 kW
Environmental: -40°C to +55°C
Band: all most all bands in FDD/TDD
TX Power: 2x40W or 4x20W MIMO
Chassis:
BBU: 86 mm x 442 mm x 260 mm
1xRRU: 380 mm x 320 mm x 140 mm
Approx. 48lbs. (5kg + 1x17kg) unloaded
Interfaces:
Fast Ethernet: 2x1GB
Primary Rate ISDN
Node1 is a Registered Trademark of The LEMKO Corporation
Node1â„¢
2. www.Lemko.comInfo@Lemko.com
Lemko Node1TM
4G core network solutions deliver the
benefits of tomorrow’s network for today’s operators.
The all-IP, packet based solution places the functional-
ity of an entire cellular system at each cell site, thus
eliminating all of the channel based backhaul. This
revolutionary design delivers a profitable business
case for providing service to previously cost-prohibitive
areas. All voice calls and data can be off loaded locally
Lemko’s Node1 meets the goals and vision of the industry’s fourth generation core net-
work. The fully distributed, all IP based, software design delivers low data latency
while supporting the high levels of data traffic demanded by users, combined with the
high quality voice services they expect.
It simplifies network design, offering a flat architecture with peer-to-peer communica-
tion. Most important, Node1 gives you the lowest total cost of ownership from the time
it is purchased and then throughout every year it is operational.
4G Core Network
Node1
L3900 UMTS/HSPA
Power:
-48 V DC / 110 & 220 V AC
Typical Consumption 0.5 kW
Environmental: -40°C to +55°C
Band: 850/900/1800/1900/2100/1700
TX Power per RRU:
TRX x 40W or 2TRX x 10W
3 x RRU
Chassis:
BBU: 86 mm x 442 mm x 310 mm
1xRRU: 480 mm x 270 mm x 140 mm
Approx. 48lbs. (7kg+1x15kg) unloaded
Interfaces:
Fast Ethernet: 2x1GB
Primary Rate ISDN
SIP/IMS
Node1 is a Registered Trademark of The LEMKO Corporation
Node1â„¢
3. www.Lemko.comInfo@Lemko.com
Lemko Node1TM
4G core network solutions deliver the
benefits of tomorrow’s network for today’s operators. The
all-IP, packet based solution places the functionality of an
entire cellular system at each cell site, in other word,
those products are as the network function virtualization
(NFV) and as the software defined network (SDN), thus
eliminating all of the channel based backhaul. This revo-
lutionary design delivers a profitable business case for providing service to previously
cost-prohibitive areas.
Lemko’s Node1m meets the goals on the mobile network in mobility. The fully distrib-
uted, all IP based, software design delivers low data latency while supporting the high
levels of data traffic demanded by users, combined with the high quality voice services
they expect. Also it supports the satellite link for interconnection
It simplifies network design, offering a flat architecture with peer-to-peer communica-
tion. Most important, Node1m gives you the lowest total cost of ownership from the
4G Core Network
Node1m
LS8306 LTE/UMTS
Power :
SUV Internal Supply
Environmental: -40°C to +55°C
Band: all most all bands
TX Power: 2x40W or 4x20W MIMO
Chassis:
Mounted in the back luggage area in all
middle SUV, Auto risible antenna mask
can extend up to 10 meters height.
Interfaces:
Fast Ethernet: 2x1GB
Primary Rate ISDN
Satellite Link Available
Node1 is a Registered Trademark of The LEMKO Corporation
Node1â„¢
4. www.Lemko.comInfo@Lemko.com
Lemko Node1TM
4G core network solutions deliver the
benefits of tomorrow’s network for today’s operators.
The all-IP, packet based solution places the functional-
ity of an entire cellular system at each cell site, thus
eliminating all of the channel based backhaul. This
revolutionary design delivers a profitable business
case for providing service to previously cost-prohibitive
areas. All voice calls can go through SIP to the VoIP
Lemko’s Node1 meets the goals and vision of the industry’s fourth generation core net-
work. The fully distributed, all IP based, software design delivers low data latency
while supporting the high levels of data traffic demanded by users, combined with the
high quality voice services they expect.
It simplifies network design, offering a flat architecture with peer-to-peer communica-
tion. Most important, Node1 gives you the lowest total cost of ownership from the time
it is purchased and then throughout every year it is operational.
4G Core Network
Node1
L3900 GSM/EDGE 6TRX
Power:
-48 V DC /110 & 220 V AC
Typical Consumption 0.5 kW
Environmental: -40°C to +55°C
Band: 850/900/1800/1900
TX Power/RRU:
2TRX@40W/8TRX@7.5W
3xRRU: 6TRX@40W/8TRX@7.5W
Chassis:
BBU: 86 mm x 442 mm x 310 mm
1xRRU: 480 mm x 270 mm x 140 mm
Approx. 48lbs. (7kg+1x15kg) unloaded
Interfaces:
Fast Ethernet: 2 x 1GB
Primary Rate ISDN
SIP
Node1 is a Registered Trademark of The LEMKO Corporation
Node1â„¢
5. www.Lemko.comInfo@Lemko.com
Lemko Node1TM
4G core network solutions deliver
the benefits of tomorrow’s network for today’s opera-
tors. The all-IP, packet based solution places the func-
tionality of an entire cellular system at each cell site,
thus eliminating all of the channel based backhaul.
This revolutionary design delivers a profitable busi-
ness case for providing service to previously cost-
Lemko’s Node1 meets the goals and vision of the industry’s fourth generation core net-
work. The fully distributed, all IP based, software design delivers low data latency
while supporting the high levels of data traffic demanded by users, combined with the
high quality voice services they expect.
It simplifies network design, offering a flat architecture with peer-to-peer communica-
tion. Most important, Node1 gives you the lowest total cost of ownership from the time
it is purchased and then throughout every year it is operational.
4G Core Network
Node1
L3900 CDMA 1X+DO
Power :
-48 V DC / 110 & 220 V AC
Typical Consumption 0.5 kW
Environmental: -40°C to +55°C
Band: 450/850/1700/1900
TX Power: 3TRX 20W@1X 20W@DO
Chassis:
BBU: 86 mm x 442 mm x 310 mm
1xRRU: 480 mm x 270 mm x 140 mm
Approx. 48lbs. (7kg + 1x15kg) unloaded
Interfaces:
Fast Ethernet: 2x1GB
Primary Rate ISDN
Node1 is a Registered Trademark of The LEMKO Corporation
Node1â„¢
6. www.Lemko.comInfo@Lemko.com
The Lemko Node2â„¢ provides carrier grade
solution that connects an all IP network with
any existing legacy core networks using SS7
over IP Sigtran and Diameter which include MAP, IS-41D, CAMEL, WIN, ISUP signal-
ing and call setup. The Node2 is designed for scalability and is 3GPP and 3GPP2
standards compliant.
Node2 enables full roaming with legacy core networks, and provides all the necessary
signaling and bearer functions for IP interconnect.
Power :
110/240 (200 Watts) hot-plug auto-
switching universal DC configuration
with redundant hot plug -48 to -60 V20
A DC power supplies
Chassis:
2U Rack-mountable chassis
74.4cm D x 44.43cm W x 8.64cm H *
* with bezel attached
Rack Weight 50.71 lbs (23 Kg),
maximum configuration
Circuit IO:
4 ISUP Traffic Trunks
Environmental:
Operating Temperature: 10º C to 35º C
(50º F to 95º F)
Storage Temperature: -40º C to 65º C
(-40º F to 149º F)
Operating Relative Humidity (non-
condensing twmax = 29C): 20% to
80% non-condensing
Maximum humidity gradient: 10% per
hour, operational and non-operational
conditions
Interfaces:
2 x 1Gb Ethernet
from the Lemko Node2 Family of Products
Node2 :
Supports: Sigtran/Diameter
SS7 over IP
MAP/CAMEL/IS-41D/WIN
Node2
Packet-1
Node2 is a Registered Trademark of The LEMKO Corporation
Node2â„¢
7. www.Lemko.comInfo@Lemko.com
The Lemko Node2â„¢ provides carrier grade
solution that connects an all IP network with
any existing legacy core networks using E1,
SS7, MAP, IS-41D, CAMEL, WIN, ISUP signaling and call setup. The Node2 is de-
signed for scalability and is 3GPP and 3GPP2 standards compliant.
Node2 enables full roaming with legacy core networks, and provides all the necessary
signaling and bearer functions for IP interconnect.
Power :
110/240 (200 Watts) hot-plug auto-
switching universal DC configuration
with redundant hot plug -48 to -60 V20
A DC power supplies
Chassis:
2U Rack-mountable chassis
74.4cm D x 44.43cm W x 8.64cm H *
* with bezel attached
Rack Weight 50.71 lbs (23 Kg),
maximum configuration
Circuit IO:
4 x E1 or 4 x T1
Environmental:
Operating Temperature: 10º C to 35º C
(50º F to 95º F)
Storage Temperature: -40º C to 65º C
(-40º F to 149º F)
Operating Relative Humidity (non-
condensing twmax = 29C): 20% to
80% non-condensing
Maximum humidity gradient: 10% per
hour, operational and non-operational
conditions
Interfaces:
2 x 1Gb Ethernet
from the Lemko Node2 Family of Products
Node2 :
Supports: SS7 over E1 or T1
ISUP Traffic Over E1 or T1
MAP/CAMEL/IS-41D/WIN
Node2
Circuit-1
Node2 is a Registered Trademark of The LEMKO Corporation
Node2â„¢
8. www.Lemko.comInfo@Lemko.com
The Lemko Node2â„¢ GGSN/PGW provides carrier grade solution that connects an all
IP GGSN network with any existing legacy core networks using Gi, Gn/Gp signaling
and call setup. The Node2 GGSN/PG is designed for scalability and is 3GPP Rel 4,
Rel 5 and Rel 6 standards compliant.
Node2 GGSN/PG enables full roaming with legacy core networks, and provides all the
necessary signaling and bearer functions for IP interconnect.
Power:
110/240 (200 Watts) hot-plug auto-
switching universal DC configuration
with redundant hot plug -48 to -60 V20
A DC power supplies
Chassis:
2U Rack-mountable chassis
74.4cm D x 44.43cm W x 8.64cm H *
* with bezel attached
Rack Weight 50.71 lbs (23 Kg),
maximum configuration
Maximum Through Put:
Gbps @ 1400BPP Per 1U
Can be parallel stack to increase the
through put
Environmental:
Operating Temperature: 10º C to 35º C
(50º F to 95º F)
Storage Temperature: -40º C to 65º C
(-40º F to 149º F)
Operating Relative Humidity (non-
condensing twmax = 29C): 20% to
80% non-condensing
Maximum humidity gradient: 10% per
hour, operational and non-operational
conditions
Interfaces:
2 x 1Gb Ethernet
from the Lemko Node2 Family of Products
Node2 GGSN/PG:
Supports: Gi
Gn/Gp
3GPP Rel 6
Node2
GGSN/PGW
Node2 is a Registered Trademark of The LEMKO Corporation
Node2â„¢
