The document provides instructions for installing an epoxy coating on a garage floor in 4 parts: 1) Preparing the floor by checking for existing coatings and stains, 2) Etching the floor using an acid solution to clean and prep the surface, 3) Coating the floor by selecting and applying the epoxy product, and 4) Finishing up by disposing of materials and allowing full curing before use.

1. Install an Epoxy Coating on Garage Floor?

2. Part - I
Preparing the Floor

3. Determine if the floor has
a coating on it.

4. Look for oil or grease
stains

5. Look for rubber residue from
tire scuffing.

6. undetected sealers or coatings
by taking a small cup of
muriatic acid mixed at a ratio
of 4 parts water to one part
acid

7. Part - II
Etching the Floor

8. Get a cleaner for etching

9. Presoak the floor

10. Mix one gallon of mixed
acid/water solution (4 water
: 1 acid)

11. Rinse entire floor
well

12. Allow the floor to dry
completely

13. Part - III
Coating the Floor

14.  Select the product you will use to coat your garage floor.
 Calculate the amount of material required to do your project.
 Install the coating.
 Design it, if desired.

15. Part - IV
Finishing Up

16.  Dispose of your used materials.
 Allow the epoxy to cure completely.
 Observe the re-coat times carefully.

17. • Concrete Repair
• Commercial Flooring
• Concrete Sealing
• Concrete Grinding
• Concrete Cutting
Call 0447 766 773!
Area Serving: Brisbane, Gold Coast