1. CV OF MUHAMMADSAMEER KHAN
CELL No 03052108979, 03350754824 Page 1 of3
MUHAMMAD SAMEER KHAN
OBJECTIVE
Seeking a position for professional career which provides opportunities and multifarious experience
and which may utilize my flexible, dynamic & professional capabilities for challenging future
prospects.
SUMMARY
Highly motivated to take challenges and score the best results. With 10 years industry experience in
Erection & Commissioning of Condensate CDU Unit, DHDS/DHT & working on Polymerization Plant,
CDU, DHT, NHT, Plat former, LSU. Good interpersonal, proactive and diversified skills. Blessings of
Almighty Allah, prayers of my best wishers and commitments to my job are the way of my
excellence.
EXPERIENCE 10 YEARS
BYCO PETROLEUM PAKISTAN LIMITED
The Harbour Front, 9th Floor, Dolmen City, HC-3, Block 4, Marine Drive, Clifton Karachi.
Officer - Operations
November, 2015 to date
BYCO Petroleum Pakistan Limited is Pakistan biggest crude oil refining facility having a capacity of 1,
55000 bbl. /day of crude oil with their 02 refineries.
Currently I am working in BYCO petroleum concerned units are LPG Sweetening, Hydro-
desulphurization, and Plat forming Units. Currently working at NHT, Reformer and LSU DCS.
PAK ARAB REFINERY LIMITED
Pak-Arab Refinery Limited, Corporate Headquarter, Korangi Creek Road, Karachi-75190
Assistant Technologist - II
October, 2011 to November, 2015
Worked at MCR – Diesel Hydro Desulfurization Unit (EURO-II Standards) with daily production of
26000 BPD major equipped with PLC operated Heater, 2 fixed beds Reactor, Single Stage
Reciprocating Compressors, Coalesces, Closed Draining Systems, Stripper, Amine Handling & Gas
Scrubbing Section etc.
ENAR PETROLEUM REFINING FACILITY (EPRF-I, EPRF-II)
EPRF Building, Plot No 7-B, Sector 7-A, Korangi Industrial Area, Karachi.
Field Operator
May, 2008 to September, 2011
I am working in ENAR Petroleum Refinery Facility (EPRF-l) as a Field Operator
 I have working experience on distributive controlling system (DCS) EMERSON Process
Management DELTAV v9
 To make sure all equipment’s arein smooth operation.
 Co-ordinate with Maintenance Department for preventive maintenance as per scheduled
program.
 Raising Work Request for mandatory maintenance job to Supervisor.

2. CV OF MUHAMMADSAMEER KHAN
CELL No 03052108979, 03350754824 Page 2 of3
ENAR PETROLEUM REFINING FACILITY (EPRF-II)
I was involved in erection, worked in ENAR Petroleum Refinery Facility (EPRF-ll) and verify isometric
P&ID.
PAKISTAN SYNTHETIC LIMITED (PSL)
F-l, 2, 3 & F-13, 14 & 15, HUB INDUSTRIAL, DISTRICT LASBELLA, BALOCHISTAN
Technical Officer
April 2006 to April 2008
Two years working experience in latest Petro chemical plant of fiber known as Pakistan Synthetic
Limited HUB Baluchistan as a Technical Officer. I have working experience on distributive controlling
system (DCS) Yokogawa CS3000 Singapore and I had attended training program from Yokogawa for
process point of view.
TURNAROUNDS EXPERIENCE
Attend Turnaround at PSL, EPRF & PARCO
 Carried out erection of EG vacuum system and installed Pre-Heater on Furnace TA (Turn
Around) in September, 2006 at PSL.
 Carried out Pre-flash tower Rushing ring unloading loading Crude tank cleaning and hydro
jetting of exchanger TA in October, 2009 at EPRF
 Carried out Shut down, Empty out of vessels, Steam out for Hydrocarbon freeing, Safe hand
over of Equipment’s to Maintenance, Job safety analysis regarding critical jobs, Vessel entry,
Box-up, Leak test , Pressure test, O2 freeing and safe Start-up of units in Turn Around.
EDUCATION
B.Tech[Chemical] 1st Division 2009
DAE [Chemical] 1st Division 2004
Secondary School Certificate 1st Division 1999
ACHIEVEMENTS
 Working as an Auxiliary Fire Fighter in BYCO Emergency Response Team.
 Involved in Regeneration of Reformer Catalyst activity, held in BYCO Turn Around-2015
 Attended PARCO HSE Training Program including several courses like FM-200 System, JSA.
MSDS, SCBA, Scaffolding Safety, Audits Inspection & Surveys, Air Emissions Management,
HAC, IRS, ERP, Solid Waste Management, MM-8000 System, Work Permit System, Noise
Hazards, Electrical Safety etc.
 Attended Emergency Response Team Training Program coordinated by PARCO. After
completion of Training Program I had been assigned as MCR ERT Member
 Attended monthly refresher courses conducted from HSE Department – PARCO.
 Worked as an Assistant to HSE Engineer in Turn Around-03 held in PARCO.
 Worked with Rescue Team in Turn Around-03 on High Tech Breathing Apparatus while
confined space “A Type Entry” of CCR Reactor was in progress from Descon & UOP.
 Authorized Work Permit Originator by PARCO.
 Attended In-House Training Program on Team Building & Furnace Operations & Heat
Exchanger & Maintenance, conducted by PARCO.

3. CV OF MUHAMMADSAMEER KHAN
CELL No 03052108979, 03350754824 Page 3 of3
COMPUTER PROFICIENCY
 PC Assembling & Maintenance
 Commercial Publishing Software
 Web Mastering & Office Automation
 Internet Surfing & SAP
PERSONAL PROFILE
Father’s Name - Sher Khan
Dateof Birth - July 5th, 1983
Place of Birth - Karachi
N.I.C. No. - 42101-1774770-7
Nationality - Pakistan
Marital Status - Married
Passport No. - PZ4137701
CONTACT DETAILS
Landline (Res) - +92-213-6980375
(Off) - +92-213-2752299 (Ext) 4359 - 61
Cellular - +92-315-2108979, +92-335-0754824
E-mail - pro.sameer@outlook.com
Postal Address - House No. 378, Sector 7D/2, Gulshan-e-Faroq,
Anda MOR, North Karachi, Karachi – 75850.