This document outlines a vision for more sustainable and eco-friendly construction materials and processes. It proposes using foam concrete technology to create blocks from fly ash and other wastes that are locally available, energy efficient, and reduce environmental impacts. The blocks offer benefits like strength, insulation, moisture resistance, and economy compared to traditional clay bricks. Using these blocks helps preserve soil, forests, and resources while providing affordable sustainable construction options.

1. VISION:
Ours is an initiative for Green future
We will Save precious soil cover ,forest Cover and
Energy, wherever possible
•To provide, ecofriendly, economical
Products to Building Industry
•To effect societal change by
providing very simple but effective
technologies through decentralised
distribution model.
• To make construction more Energy
Efficient, faster and Sustainable

2. “Sustainability is a journey, not an end
point”
• We have a responsibility to use our natural
resources wisely by specifying building products
carefully and ensuring that these have a high
recycled content, where appropriate. The
materials that are used to make Buildings/
Structures should be available locally and
Economically.
• Local sourcing supports regional economies and
employment. Indeed, about 90 % aggregate
should travel less than 50 Kms to reach its
destination.

3. PERILS OF CLAY BRICKS
• Clay Brick is being Used for Ages. We must
acknowledge it. However it is a cause of worry
due to :
• Fast Urbanisation and shrinking Agriculture Land
• Addition of Industrial waste like Flyash in
Environment
• Rise in Global warming
• Threat to Food security. [ It takes 100 Years to
build soil layer of 1 cm and minutes to remove ]

4. PROPERTIES REQUIRED IN
ALTERNATIVES
• Local Availability
• Resistance to Water
• Good Thermal Insulation
• Nail Holding Capacity
• Sustainability
• Eco friendly and with Low Embedded energy
• Low carbon footprint of materials, associated
environmental impact and pollution.
• Should recycle waste and require minimum
processing.

5. Decentralised Technology
need of the Hour
• Rise in thermal power
consumption leads to
increased environmental
pollution by Fly ash
• Innovative , Low cost, Eco-
friendly and Scalable
technology for fly ash brick
manufacturing could be the
answer to the above
challenges

6. Foam Concrete technology
• CLC is a process based on making air bubbles in the form
of a foam and then mixing the foam into a cement / sand
slurry. The slurry is then poured into moulds. Since CLC
slurries have higher cement contents,
• no autoclave curing is required
• – instead, the finished product is cured like normal
concrete or Steamed Cured with low pressure to achieve
early strength.
• CLC air bubbles are significantly smaller, stronger, and
each bubble is part of a closed cell system – which means
CLC blocks have lower water absorption.
• CLC increases its strength progressively under atmospheric
conditions

7. Advantages of CLC Bricks
• CLC Bricks have excellent compressive
strength in excess of regular clay bricks /
solidblocks, guarantees min. Compressive
strength of 3N/mm2.
• Bending strength is 15 to 20% of compressive
strength.
• CLC Bricks density is 800kg/m2 which reduces
dead load on structures.
• Huge saving in foundation and structure
savings upto 30% on beam costs.
• Good earth quake resistance properties.

8. • Easy handling, Faster construction, Huge saving of labour.
• CLC Bricks offer highest thermal insulation making cool
summers and warm winters.
• Reduced Air conditioning expenses.
• CLC Bricks are fire resistant.Non toxic fumes in case of fire.
• Excellent acoustic barrier. More peace of living,
No disturbance from your neighbourshome theatre.
• Highly accurate and smooth walls reduction in plastering.
• Opt for any finish on walls – external plastering, tiling,
cladding, internal tiling, drylining, spray plaster or anything
of your choice.

9. Comparison to other wall systems
PARTICULARS RED
BRICK
CONCRET
E BLOCK
FLYASH
BRICK
CEMENT
BOARD
CONCRETE
WALL
AAC BLOCKS CLC BLOCKS
STRENGTH
    
MOISTURE
RESISTANCE
    
ACCOUSTICS
 
FIRE
RESISTANCE
     
ECONOMY
  
EVEN
SURFACE
   
LIGHT
WEIGHT
  
QUICK
INSTALLATION
   
NAIL HOLDING
    
BIG MOISTURE
MOVEMENTS
 
THERMAL
INSULATION
  

10. New Initiatives
• At present Regular Flyash brick is mainly
Replacing Red Brick.
• It has some quality issues affecting its usage
though it is cheaper
• As a technology Company we have initiated a
drive to overcome this
• We have also experimented with Baggase ash
with VNIT and Rice Husk ash with CLC
technology . It has potential to utilise many
wastes reducing Pollution effectively.

11. Taking first step towards sustainability
As Urbanisation continues at a fast pace ……
There is increasing Pressure on Natural Resources.
Just by using Eco Friendly Alternative like CLC
You can
Help SAVE Precious Soil Per HOME
That Means A life time of Food Security for Your FAMILY FOR FREE
Save EARTH For our Children
Thanks