Starting procedure of auto caed

1. CAED - PROCEDURE

2. BASIC STEPS TO BE FOLLOWED BEFORE
DRAWING

3. STEP 1 : UCS ICON – NO ORIGIN

4.  MAIN SCREEN
THIS IS NOT CORRECT

5.  MAIN SCREEN

6.  MAIN SCREEN
THIS SHOULD ALWAYS BE
AT THE LEFT BOTTOM

7.  MAIN SCREEN
THIS SHOULD ALWAYS BE
AT THE LEFT BOTTOM
TO DO THIS.
TYPE A COMMAND :
*UCSICON*

8. SELECT NO ORIGIN FROM
THE OPTION
TO DO THIS.
TYPE A COMMAND :
*UCSICON*

9. STEP 2 : UNITS

10.  MAIN SCREEN
TYPE A COMMAND :
*UNITS*
UNITS SHOULD BE IN
MILIMETERS WITH PRECISION
AT 0

11. SELECT THIS (MILIMETERS)
SET THIS @ 0

12. STEP 3 - DIMSTYLE
 WE CAN SKIP THIS STEP, BUT IT WILL RESULT IN REPEATING THE
PROCEDURE MANIER TIME.
 IN SIMPLE WORDS. IF WE CHANGED THE DIMSTYLE AT THE
BEGINNING. IT WILL BE BEST SUITED, BECAUSE WE DON’T HAVE TO
CHANGE THE TEXT HEIGHT AGAIN AND AGAIN.
 IF WE SKIPPED THIS STEP AND MOVED ON. AT EACH TIME WHILE
MAKING A TEXT BOX WE HAVE TO CHANGE THE TEXT HEIGHT

13. COMMAND : *DIMSTYLE*
SELECT MODIFY

14. COMMAND : *DIMSTYLE*
SELECT THE ARROW SIZE AND TEXT HEIGHT ACCORDINGLY.
(SELECT A APPROPRIATE SIZE. WHICH SHOULD LOOK GOOD)
SELECT OK

15. COMMAND : *DIMSTYLE*
SELECT SET CURRENT

16. STEP 4 - LIMITS

17.  BASICALLY LIMITS ARE NOTHING BUT THE LAST COORDINATES ON
THE SHEET.
 THE LOWER LEFT CORNER AND THE UPPER RIGHT CORNER
ASSUME THAT THIS IS THE DRAWING SHEET
LOWER LEFT CORNER
(ALWAYS ORIGIN)
COORDINATES : 0,0
UPPER RIGHT CORNER
SELECT THE COORDINATES
WISELY, IT SHOULD BE
GREATER THAN YOUR
DRAWING AREA
HORIZONTAL DISTANCE
V
E
R
T
I
C
A
L

18. LOWER LEFT CORNER <0.000,0.000>
WHICH IS SIMPLY THE ORIGIN

19. UPPER RIGHT CORNER <YOUR COMFORT>

20. CONCLUSION
 ALL THE 4 STEPS ARE MANDATORY, IF ANY OF THE STEPS IS SKIPPED. YOUR PRINTOUT
WILL HAVE SOME ERROR, OR IT WILL IMPACT ON THE PRINOUT IN SIMPLE WORDS (
YOU MAY LOSE SOME MARKS ALSO)

21. ALL THE BEST
DO WELL……….
~ SFM (BATCH 2022 – 2023)
A SEC
THANK YOU 😎😉