Designer doorsets bring design and performance together

Designer
More than a door.
performance
doorsets.
Cl/SfB (31.5)
Pr_30_59_24 (Uniclass L411) August 2015

Designer doorsets
give complete
freedom to produce
unique designs
that meet specific
performance
requirements.
04. We design. We manufacture.
We supply. We support.
06. Where can Designer doorsets
be specified?
08. Design attributes
10. Inspiring environments
12. Look & feel options
14. Finish options
16. Glazing options
18. Ironmongery options
20. The integrated doorset option
23. Let’s specify
24. Performance
26. Configurations
& handings
28. Dimensioning
32. Finishes
37. Glazing beads & systems
40. Vision panels
42. Privacy vision panels &
air transfer grilles
44. Frames
48. Extension linings, fanlights,
overpanels & glazed screens
52. Edge detailing,
intumescents & seals
56. Architectural ironmongery
62. Installation & maintenance
64. Compliance. Tried & tested
66. Service & technical support
69. Leaderflush Shapland Laidlaw
Contents
www.leaderflushshapland.co.uk
We are here to help: 01773 530500

The Designer doorset range brings you complete design freedom, while we focus on
meeting performance demands and realising your vision. This is achieved by working
in partnership with you, so you benefit from our expertise, service and product quality
to ensure that your concepts are carried through to practical long-term solutions.
Designer – where design and performance
go hand in hand.
The Designer doorset range suits virtually
any application and the only limit to
what we can achieve together is your
imagination. With every commercially
available wood veneer option, as well as
laminate, PVC, paint and metal finishes,
the Designer doorset offers almost
unlimited choice.
There are many instances when doorsets
are needed with a range of different
performance characteristics.
Being a single source supplier of
performance doorsets, you can be
confident in the knowledge that fire, smoke,
acoustic, durability, radiation and security
performance requirements are being met,
and that the end result will be both highly
effective and aesthetically pleasing.
01. Corby Cube, Black Laminate, Single doors
02. Grace Academy, Red Laminate, Equal Pair
03. Coventry & Walgrave Hospital, Laminate,
Equal Pair
01. 02. 03.
Page /03.

We design.
We manufacture.
We supply.
We support.
More than a door.

Design
and technical.
Our Design and Technical Services Team
will support you and your consultants
with design and technical development,
ensuring the right product is specified for
the right application.
We can satisfy diverse customer needs, allowing you to benefit from our
extensive manufacturing capability, technical expertise and innovative
product solutions, whilst selecting complementary products and systems
from one partner.
Guaranteed
performance.
All Leaderflush Shapland Laidlaw
Designer doorsets are subject to a
1 year performance guarantee. In addition,
an integrated performance doorset is
subject to a 10 year guarantee, assuming
normal wear and tear. Conditions and
usage must be in accordance with our
recommendations and are subject to our
terms and conditions.
We support you.
From start to finish we have dedicated
teams to support you from specification
to delivery and on-site installation. Every
member of our team is committed to
delivering ultimate reliability and service
from concept to completion.
We are your single source supplier of bespoke
performance doorsets, architectural
ironmongery and integrated performance
doorsets.
Page /05.

More than a door.
Where can
Designer doorsets
be specified?
Designer doorsets provide a completely bespoke solution. With unique
design and performance characteristics to match, Designer doorsets are
ideally suited to a wide range of sectors and applications.
Health
Designer doorsets bring together
functionality and design into a versatile
and performance-led doorset solution.
Easy to clean, anti-bacterial properties,
high impact PVC, radiation protection and
flush glazing options give specifiers and
designers flexibility across a wide range of
applications for the health sector.
Education
With unlimited colours and finishes,
Designer doorsets meet the performance,
safety and compliance guidance of DfE to
create inspirational learning environments.
Commercial
Any commercially available veneer,
laminate, metal or PVC in a multitude of
colours are available, giving designers
complete freedom when creating
contemporary commercial spaces.
Residential
Whether it is high-end exclusive living or
high volume for modern living, Designer
doorsets provide solutions for all residential
project types. Distinctive interior doorsets
in simple or contemporary designs can be
manufactured to meet the building’s interior
design scheme.
Leisure/Recreation
Veneers, graphics and bright colours allow
design flair to create high performance
facilities for leisure and recreation facilities.
Public sector
Council buildings, public buildings, courts,
police stations, prisons and fire stations
are designed and built to last with high
performance, function and security
paramount. With guaranteed performance
and multiple aesthetic finishes available the
Designer range is ideal.
Retail
Where appearance is as important as
performance, the Designer range is perfect
for high-end new builds and refurbishment
schemes. With look and feel options and
performance to suit the design criteria
of many project types Designer doorsets
are the perfect solution for retail space
requirements.
More than a door.

04.
02.
01. Winifred & Holtby Tweendyles, Steamed Beech
Veneer, Equal Pair
02. Southern General Hospital, American White Oak,
Equal Pair
03. Salisbury Law Courts, European Oak Veneer with
Black Inlay, Unequal Pair
04. Devonshire Spa, White Laminate, Single Pair
05. Sewell Group Studio, Sapele Veneer, Single Door
02.01.
Page /07.
05.
03.

Aesthetics
Designer doorset solutions are available
in a huge range of finish options to deliver
a distinctive appearance and aesthetic
appeal.
Performance
Delivering certified performance for:
• Acoustic - Sound reduction up to
46RwdB
• Fire - Fire resistance up to FD120
• Radiation shielding - Radiation
performance up to code 7
• Security - High security up to ‘delayed
entry level 3’
Anti-bacterial
A biocidally proactive additive is integral to
our lacquer finishes and our Hygieniform
PVCs, providing protection against harmful
bacteria such as E.coli, Salmonella and
MRSA. It works by preventing the bacteria
access to nutrients so that they starve and
die. It does not employ silver technology,
rendering it completely UV stable and
remains effective for years because of its
inherently low water solubility.
• 99.9 percent kill rate over a 24 hour
period
• non-carcinogenic
• non-mutagenic
• non skin sensitising
• UV stable
• independently tested and verified
Pivette
The sliding, folding mechanics of Pivette
make it a versatile solution where
functionality, access and space are
important considerations. The unique
two-leaf articulated door minimises door
swing area whilst maximising clear opening
widths.
Pivette offers a solution to a wide range of
design problems presented by Part M of the
Approved Documents and BS8300:2001.
• Uses only one third of a conventional
door swing area
• Maximises opening area for optimum
accessibility
• Straightforward to install and easy to
operate
• Outward opening WC doors,
substantially reducing the corridor
width
• Doors opening onto landings, leaving
access space to comply with Part K
• Lobbies with space required for
wheelchair access between doorways
• Sanitary accommodation doors
opening outwards onto circulation
space
• Emergency release option
Finger protection
Sentinel and Safehinge are innovative
hand and finger protection solutions
that allow specifiers and architects to
achieve outstanding performance without
compromising design or architectural
integrity. As an integral part of the doorset,
the timber (Sentinel) or aluminium
(Safehinge) profile brings the following key
advantages:
• Prevents the crushing and shearing of
fingers (adults and children)
• An integral robust solution to reduce
the potential for misuse or vandalism
and ensure long-term reliability
• Fully complies with Approved
Documents and can be incorporated
into all design applications
• Achieves 30 RwdB making it ideal for
classroom entrance doorsets
• Cannot be forcibly removed, negating
the cost of ongoing replacement
• Offers wide choice of design aesthetics
to the specifier/designer
• Modern design and smooth line profile
is ideal for design-led environments
• Provides creative freedom and
flexibility for specifiers and designers
Design
attributes.
More than a door.

02.
04.
01.
03.
03. New Art Exchange, Full Paint, Single Door
04. Cynon Valley, White Laminate Doorsets
01. Estover Community College, Green Laminate,
Sentinel Doorset
02. Chelsea & Westminster, Green Laminate,
Pivette Doorset
Glazing
Glazing has a major impact on fire
performance and limitations are identified
in the Approved Documents. Aperture
shape and position, glazed area, style
of bead and type of glass all influence
fire performance, as well as appearance.
The most commonly used aperture
configurations, all available with fire
certification up to 120 minutes, are shown
in the vision panels section. Bespoke
glazing shapes and sizes also form part of
the Designer range.
Page /09.

Specified across health, education, commercial, leisure/recreation, public and retail sectors,
designer doorsets work as a solution for a wide range of applications.
Inspiring
environments.
01.
More than a door.

01. British Library
02. One St Peters Square
03. 55 Baker Street
04. Waterfront Hall
02. 03.
04.
Page /11.

Look &
feel options.
More than a door.

Designer doorsets bring together a range of finishes, architectural ironmongery and glazing
options, to provide a complete end-to-end integrated doorset solution. Each product has
been chosen to meet all technical performance requirements and combines style with
functionality.
St Pauls Academy, Black Laminate, Equal Pair
Page /13.

Finish
options.
Veneers
Any commercially available veneer can
be selected for use within the Designer
solution to give specifiers complete creative
freedom and highlight the simplicity and
natural beauty of wood.
Hygieniform PVC
Hygieniform, an anti-bacterial high
impact PVC is available in 15 colours.
This revolutionary PVC contains a highly
effective anti-bacterial additive throughout
the material thickness that protects against
harmful bacteria such as E.coli, Salmonella
and MRSA.
Decorative laminates
Any post-form grade laminate can be used
to face door leaves allowing an almost
unlimited choice of solid colours, decorative
patterns, metallic finishes and textures to
be incorporated.
Envision
Envision is a unique patented†
facing
option and opens up new opportunities
for architects and designers to create truly
exclusive designs. Photographic images,
company logos, signage, symbols or
other graphical illustrations, patterns or
visual effects can be back printed onto
a transparent facing material. Images
can help with the colour and contrast
requirements set out in BS8300 for users
with a visual impairment.
Paint finishes
Designer doorsets can be supplied fully
painted in any colour within RAL or British
Standard ranges.
Metal facings
Patterned and brushed stainless steel sheet
metal finishes can be supplied and can be
left clean, primed or powder-coated, with
the exception of patterned stainless steel
which is self-finished.
Timber
Frames are available in either MDF, primed
for on-site painting or hardwood that can
be polished or painted.
For full specification details please refer
to p44.
Steel
Steel frames are available powder-coated
to any RAL colour or supplied in a
stainless finish.
More than a door.
†
Envision is patented No. GB2470064.
FramesDoors

01. Bilborough College, Full Paint, Single Door
02. Michael Woods Leisure Centre, Envision Doors
03. Nottingham High School, Sky Hygieniform PVC,
Single Door
04. Bishop Ramsey School, American Black Walnut
Veneer, Equal Pair
04.
02.01.
03.
Page /15.

Glazing
options.
01. Glazing beads
02. Vision panel configurations
03. Privacy
01. Glazing beads
Bolection or flush timber beads, steel trims
or security glazing systems are available to
suit performance or aesthetic requirements.
02. Vision panel configurations
Part M of the Approved Documents
and BS8300 compliant vision panel
configurations form part of the Designer
doorset solution. We also have a range of
standard popular vision panel styles and
can accommodate bespoke glazing and
vision panel designs.
03. Privacy
Leaderflush Shapland Laidlaw has created
a range of privacy viewing panel options to
satisfy the differing needs of the healthcare,
education and commercial sectors. The
range consists of three aesthetically
pleasing designs (Visicom®, Highline® and
Intelliglass®) each providing complete
privacy and a hygienic solution for any
application.
More than a door.

01. Great Ormond Street Hospital, Timber Bolection
Bead
02. Pinewood Infant School, Multiple apertures
03. Highline Privacy Blind
04. Tameside General Hospital, Flush Bead
01.
04.
03.
02.
Page /17.

Ironmongery
options.
01. A complete package
02. Integrated performance critical
03. Doorset and ironmongery package
04. Add your own
01. A complete package
Combining performance critical and non-
performance critical operating architectural
ironmongery, creates visual compatibility,
enhanced aesthetics and offers the
highest levels of standards compliance.
Performance levels are guaranteed and
the installation process simplified and
speeded up by maximising the benefits
of factory preparation and in some cases
factory fitting of components. Leaderflush
Shapland Laidlaw has put together a range
of architectural ironmongery to provide a
complete integrated doorset package with
each product chosen to meet all technical
requirements.
02. Integrated performance critical
By incorporating all of the performance
critical architectural ironmongery as a
fully engineered unit, the performance of
the doorset can be guaranteed. As part of
the manufacturing process, mortising of
Leaderflush Shapland Laidlaw architectural
ironmongery is included at no additional
cost. This factory preparation and, in the
case of non-projecting hardware, fitting of
the ironmongery produces the quality of
finish which simply cannot be achieved
on-site.
03. Doorset and ironmongery package
Leaderflush Shapland Laidlaw appreciates
the diversity of our clients’ requirements
and will provide a compliant bid to your
specific enquiry or specification. This
gives you the flexibility to choose your
own doorset and ironmongery package to
suit your particular project needs. Please
note that compatibility checks within this
option are not done and we recommend
upgrading to either option 1 or 2.
04. Add your own
Where a specific aesthetic concept for
a building is required we can mortise for
all architectural ironmongery hardware
against free issue samples (provided that
all recessed ironmongery has rounded
corners) should an alternative range
be selected.
More than a door.

01. Bathroom Lockcase and Lever Handles
02. Lift-Off Hinge
03. Pull Handles
04. Door Closer
05. Flush Bolt
01.
04. 05.
03.
02.
Page /19.

The integrated
doorset option.
The Designer doorset
solution can also be
supplied as an integrated
performance doorset. The
integrated performance
doorset solution has
been created so that
all the components –
door leaf, frame and
architectural ironmongery
– work together as a unified
product, meeting certified
performance levels. The
integrated Designer doorset
construction and individual
product components have
been carefully selected and
fully tested to provide a
co-ordinated, fit for purpose,
certified package, offering
comprehensive product
performance and life cycle
resilience.
Certification
Our fire resisting products are
manufactured under the intensive
BWF CERTIFIRE independent third party
and BM TRADA Q Mark certification
schemes. All other performance criteria are
fully certified to recognised performance
standards across the range.
We ensure all the items of architectural
ironmongery installed adhere to our
certification requirements. This avoids
the inadvertent use of non-standard
components, which could undermine
and diminish fire, acoustic or radiation
performance of the completed doorset
installation.
Compliance
Our doorsets are fully compliant with
relevant approved documents (England &
Wales), the technical handbooks (Scotland)
and Technical Booklets (Northern
Ireland) and Department of Health
recommendations.
Improved quality
Attention to detail is an important aspect
of a complete, integrated performance
doorset. The factory preparation and, in the
case of non-projecting hardware, fitting of
the architectural ironmongery produces
the quality of finish which simply cannot be
achieved on-site.
Enhanced aesthetics
We prepare our doorsets for architectural
ironmongery in our factory and supply all
items that make up the doorset, to ensure a
greatly enhanced appearance.
Superior efficiency
The use of factory prepared and installed
architectural ironmongery ensures the
door and its hardware are working at
their most efficient. It is proven that the
majority of maintenance issues are caused
by incorrectly or inaccurately installed
ironmongery.
Single source supplier
The resources and experience of
Leaderflush Shapland Laidlaw ensures
trouble free scheduling and delivery of our
integrated solutions from a single source.
More than a door.

One St Peters Square, American Black Walnut Veneer,
Unequal Pair with ScreenAn end result which is greater than the sum
of its parts.
Time saving
Reduced work on-site improves site
co-ordination and reduces snagging issues
and remedial work.
•
Superior durability
Superior durability and life cycles are
ensured, while site preparation is virtually
eliminated, increasing the accuracy of
fitting, particularly of critical architectural
ironmongery items such as hinges, lock
cases and concealed door closers. This
reduces stresses placed on the door, frame
and operating hardware.
Cost savings
Savings in site management costs, which
are usually required to oversee the co-
ordination of ‘multi-supplier’ provision, are
achieved.
Guarantee
The integrated performance doorset is
subject to a 10 year guarantee on doorsets,
assuming normal wear and tear. Conditions
and usage must be in accordance with our
recommendations and are subject to our
terms and conditions, which can be found
at: www.leaderflushshapland.co.uk.
Page /21.

Let’s
specify.
01. Performance
02. Configurations & handings
03. Dimensioning
04. Finishes
05. Glazing beads & systems
06. Vision panels
07. Privacy vision panels & air transfer grilles
08. Frames
09. Extension linings, fanlights, overpanels & glazed screens
10. Edge detailing, intumescents & seals
11. Architectural ironmongery
Page /23.

01 Performance.
Enduracor
Solid particleboard core with softwood
framing to all 4 edges, sub-facing material
both sides with 6mm hardwood lippings
to both vertical edges or all 4 edges. Used
in pairs of doors or where a more robust
core is needed for high use areas such as
schools and hospitals.
Simcor
Solid chipboard construction, hardwood
lipped to all 4 edges. Suitable for office or
riser doors where there is an incentive for
care in use.
Lamcor
Softwood laminated core with softwood top
and bottom rails, sub-facing material both
sides with 6mm hardwood lippings to both
vertical edges or all 4 edges. Specified as a
client requirement.
Audiodor
Particleboard core in either single
or multiple layers depending upon
performance, with softwood or hardwood
framing to all 4 edges. Sub-facing material
to both sides and 6mm hardwood lippings
to all edges.
V90/V120
Softwood core with hardwood framing to
all 4 edges, chipboard and non-
combustible substrates with MDF sub-
facing with concealed hardwood lippings to
vertical edges.
Sentinel
Sentinel doorsets are constructed using the
Enduracor construction.
Safehinge
Safehinge doorsets are constructed using
the Enduracor construction.
Doorset types
More than a door.
Depending on the performance requirements of the doorset the following
doorset construction types are available within the Designer range.
AV
Hardwood laminated core with hardwood
top and bottom rails, plywood sub-facing
material both sides with 6mm hardwood
lippings to both vertical edges or all
4 edges.
Leadline
Building on the Enduracor base
construction, the Leadline door
incorporates a concealed sheet of lead
to the required specification and is faced
in MDF. 6mm hardwood lippings to both
vertical edges or all 4 edges. Lead fillets
extend through the edge of the door at the
meeting stile to ensure total shielding.
Pivette
Pivette doorsets are constructed using the
Enduracor construction.

Designer range performance table
02.01. 03.
V90
V120
NR
✔
✔
✔
N/A
N/A
✔
✔
✔
✔
✔
✔
✔
N/A
N/A
✔
✔
✔
✔
N/A
N/A
N/A
✔
N/A
N/A
N/A
N/A
N/A
✔
✔
✔
N/A
N/A
N/A
✔
✔
✔
N/A
N/A
N/A
N/A
✔
N/A
N/A
N/A
N/A
✔
✔
✔
✔
✔
✔
✔
✔
✔
32-46
N/A
32-36*
N/A
N/A
N/A
29
29-33
30
N/A
Code 5&7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1-4
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
N/A
N/A
Simcor ✔ ✔ N/A✔ N/A ✔ 30 N/A N/A N/A N/AN/ASD
HD-SD
SD
HD
MD
MD
HD
SD
SD
HD
FD30 FD90FD60 FD120 Smoke Acoustic Radiation
Delayed
entry
Suitable
external
Thermal
transmittance
Classification
of service life
Severe
Heavy
✔ ✔ N/A✔ N/A ✔ 28-29 N/A N/A N/A N/A✔SDEnduracor
Sentinel
Lamcor
Safehinge
Audiodor
AV
Leadline
Pivette
01. 55 Baker Street, Ash Veneer, Equal Pair
02. Estover Community College, Pink Laminate,
Single Door with Overpanel
03. Newfield & Talbot School, Grey Laminate with
Graphics on, Single Door
Page /25.
* Safehinge - 32dBRw for NR and 36dBRw for FD60

Available as single or double doorsets
(equal or unequal pairs), single and double
swing or Pivette. All doorset options are
available as full height doors,
with overpanels, side lights or fanlights (see
frame options on p44 for further details).
Overpanels can be fitted with
or without a transom.
More than a door.
02 Configurations
& handings.
Designer doorsets are available in a range of configurations and handings
to suit all project requirements.
Handings
Configurations
Single Leaf Double Leaf Unequal Pair Double Leaf Single Leaf
& overpanel
Double Leaf
& overpanel
Unequal Pair Double Leaf
& overpanel
Single Leaf
& fanlight
Double Leaf & fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Sin
& f
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
Double Leaf Unequal Pair Double Leaf Single Leaf
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
ion
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
DLDA
Double Action
UPDA
Double Action
& fanlight
Unequal Pair Double Leaf Single Leaf
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
Single leaf Double leaf
Unequal pair
Single leaf Single leaf
& overpanel
Single leaf
& fanlight
Double leaf Double leaf
& overpanel
Double leaf
& fanlight
Unequal pair
double leaf
Unequal pair
double leaf
& overpanel
Unequal pair
double leaf
& fanlight
Single leaf Double leaf Unequal pair
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
Unequal Pair Double Le
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
Unequal Pair D
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
Double Leaf & fanligh
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
DLSA
Single Action r/h leading
SingleLeafDoubleLeaf
SLSA
SingleAction
DLSA
SingleAction
& overpanel
Double Leaf
& overpanel
Unequal Pair D
& overpanel
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
afDoubleLeafUnequalPairDoubleLeafSingleLeaf
&overpanel
DoubleLeaf
&overpanel
UnequalPairDoubleLeaf
&overpanel
SingleLeaf
&fanlight
DoubleLeaf&fanlight
ction
DLSA
SingleAction
UPSA
SingleAction
SLDA
DoubleAction
DLDA
DoubleAction
UPDA
DoubleAction
UnequalPairDoubleLeaf
&fanlight
Unequal Pair Double Leaf Single Leaf
& overpanel
Double Leaf
& overpanel
& overpanel
Single Leaf
& fanlight
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
& fanlight
& overpanel
Double Leaf
& overpanel
& overpanel
Single
& fanli
SLSA
Single Action
DLSA
Single Action
UPSA
Single Action
SLDA
Double Action
DLDA
Double Action
UPDA
Double Action
Single
action
left hand
Single
action
left hand
Single
action
left hand
Single
action
right hand
Single
action
right hand
Single
action
right hand
Double
action
Double
action
Double
action

Pivette handings
Door swing area
Minimised door swing area, maximising
floor space.
Emergency release Pivette
This doorset incorporates a retractable
guide bolt that overrides the standard
mode of action, allowing the door to open
away from an obstruction. The emergency
release Pivette® is ideal for WCs and other
areas where access might otherwise prove
difficult in an emergency, such as a fallen
person obstructing the opening arc.
This system is available for outward
opening doorsets.
obstructionobstruction
obstruction
Pivette with emergency release option Pivette standard operation
Right hand opening inLeft hand opening outLeft hand opening in Right hand opening out
Pivette L/H opening in* Pivette L/H opening outPivette R/H opening in* Pivette R/H opening out
Room
Corridor
Pivette L/H opening in* Pivette L/H opening outPivette R/H opening in*
Room
Corridor
Pivette L/H opening in* Pivette L/H opening outPivette R/H opening in* Pivette R/H opening out
*Note: These options are not
available with the emergency
release option.
Room
Corridor
Pivette L/H opening in* Pivette L/H opening outPivette R/H opening in* Pivette R/H opening
Room
Corridor
Page /27.

More than a door.
03 Dimensioning.
Maximum certificated doorset sizes for fire performance – sizes are displayed in mm
Single action
single leaf
Fire
rating
Double action
single leaf
Single action
double leaf
The Designer range is available in a multitude of maximum sizes depending
on the configuration and performance specified.
Configuration, size, construction and
performance characteristics are all
interrelated. Specific size ranges for
particular products can be found in
BWF CERTIFIRE or BM TRADA Q Mark
data sheets available on:
www.leaderflushshapland.co.uk.
Leaderflush Shapland Laidlaw
manufactures all door leaf sizes to suit
individual requirements.
30
60
1000 x 2925 or 1170 x 2500 (2.93m2
)
1200 x 2889 (3.46m2
)
1000 x 2925 or 1170 x 2500 (2.93m2
)
1000 x 2700 (2.97m2
)
1000 x 2925 or 1170 x 2500 (2.93m2
)
990 x 2700 or 1100 x 2430 (2.67m2
)
Enduracor
Enduracor
30
60
900 x 3200 or 1120 x 2400 (2.88m2
)
915 x 2571 or 970 x 2440 (2.37m2
)
900 x 3050 or 1150 x 2400 (2.76m2
)
916 x 2259 or 971 x 2138 (2.08m2
)
N/A
N/A
Lamcor (all variants)
Lamcor (all variants)
Audiodor 30 & Audiodor 32
Audiodor 38/40/44 super –
(Latched)
Audiodor 38/40/44 super –
(Unlatched)
30
30
30
60
60
30
60
1000 x 2925 or 1170 x 2500 (2.93m2
)
1000 x 2188 (2.19m2
)
926 x 2188 (2.03m2
)
1200 x 2889 (3.46m2
)
915 x 2649 or 1152 x 2130 (2.45m2
)
915 x 2300 or 1026 x 2047 (2.10m2
)
926 x 2275 (2.11m2
)
1000 x 2925 or 1170 x 2500 (2.93m2
)
1000 x 2188 (2.19m2
)
922 x 2135 or 925 x 2130 (1.97m2
)
1100 x 2700 (2.97m2
)
N/A
865 x 2255 or 926 x 2120 (1.96m2
)
926 x 2275 (2.11m2
)
N/A
N/A
N/A
1100 x 2700 (2.97m2
)
N/A
N/A
N/A
Audiodor 30 & Audiodor 32
Audiodor 35
Audiodor 35
Audiodor 39
30
60
915 x 2649 or 1152 x 2130 (2.45m2
)
900 x 2424 or 1025 x 2150 (2.22m2
)
915 x 2449 or 1052 x 2130 (2.24m2
)
900 x 2224 or 925 x 2150 (2.00m2
)
N/A
N/A
Simcor (all variants)
Simcor (all variants)
90
120
915 x 2300 or 990 x 2150 (2.13m2
)
915 x 2135 (1.95m2
)
915 x 2200 or 940 x 2150 (2.02m2
)
N/A
N/A
N/A
V90
V120
Sentinel (all variants)
Sentinel (all variants)
30
60
1026 x 2100 (2.16m2
)
1026 x 2100 (2.16m2
)
1026 x 2100 (2.16m2
)
1026 x 2100 (2.16m2
)
N/A
N/A
Safehinge – Enduracor 30
60
30
60
920 x 2517 or 1105 x 2100 (2.31m2
)
850 x 2384 or 979 x 2100 (2.02m2
)
920 x 2517 or 1105 x 2100 (2.31m2
)
850 x 2384 or 979 x 2100 (2.02m2
)
908 x 2423 or 1051 x 2100 (2.20m2
)
850 x 2284 or 929 x 2100 (1.94m2
)
908 x 2423 or 1051 x 2100 (2.20m2
)
850 x 2284 or 929 x 2100 (1.94m2
)
920 x 2467 or 1080 x 2100 (2.26m2
)
850 x 2334 or 954 x 2100 (1.98m2
)
N/A
N/A
Safehinge – Enduracor
Safehinge – Lamcor
Safehinge – Lamcor
30
60
1167 x 2275 (2.66m2
)
926 x 2275 (2.11m2
)
1047 x 2275 (2.39m2
)
926 x 2275 (2.11m2
)
N/A
N/A
AV1/AV2
AV1/AV2
30
682 x 2040 – primary leaf - max area (1.39m2
)
340 x 2040 – secondary leaf - max area (0.69m2
)
N/APivette
30
60
1170 or 2300 (2.70m2
)
926 x 2275 (2.11m2
)
1170 or 2300 (2.70m2
)
926 x 2275 (2.11m2
)
N/A
N/A
Leadline
Leadline

Maximum certificated doorset sizes for fire performance – sizes are displayed in mm
Single leaf with overpanel
(single and double action)
no transom
Double leaf with overpanel
no transom
Single leaf with overpanel
transom required
Double leaf with overpanel
transom required
Double action
double leaf
Page /29.
1000 x 2925 or 1170 x 2500 (2.93m2
)
990 x 2700 or 1100 x 2430 (2.67m2
)
max 1000 high overpanel max 600 high overpanel max 2000 high overpanel max 2000 high overpanel
N/A
N/A
N/A N/A max 2000 high overpanel max 1500 high overpanel
N/A
N/A
N/A
1100 x 2700 (2.67m2
)
N/A
N/A
N/A
N/A N/A max 2000 high overpanel N/A
N/A N/A N/A N/A
N/A
N/A
N/A
N/A
N/A N/A N/A N/A
N/A
N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
908 x 2373 or 1026 x 2100 (2.15m2
)
850 x 2234 or 904 x 2100 (1.89m2
)
N/A
N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A
N/A
N/A N/A N/A N/A N/A
N/A
N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
These sizes are not applicable to steel frames. Please contact our Technical Services Team for details.
Leaderflush Shapland Laidlaw is continually improving their product offering. Sizes may therefore be subject to change.
Project specific assessments may be available where project requirements exceed these dimensions. Please contact our Technical Services Team on 01773 530500 to
discuss further, or visit www.leaderflushshapland.co.uk for the latest version of this size chart.

More than a door.
03 Dimensioning.
The drawings below set out the terminology for dimensioning doorsets.
The maximum clearance permitted from the top of the finished floor to the underside of
the door leaf is 10mm for 30 and 60 minutes fire resistance and 5mm for 90 and 120
minutes. For smoke control the clearance is 3mm.
Key
a) 7mm gap between structural opening
and frame assembly
b) 3mm gap
c) 4mm gap at meeting stiles
d) Undercut varies
Single action leaf Double action leaf
Single action single leaf Single action pair of leaves
Single action leaf with
overpanel (no transom)
Single action leaf
with overpanel
& transom
Double action leaf
with overpanel
& transom
Single action leaf
with fanlight
& transom
Double action leaf
with fanlight
& transom
partition
width
finished
floor level
overall
frame
height
overall
frame
height
transom
thicknessframe
thickness
aframe
thickness
a
b
d
b
leaf
height
leaf
height
leaf
height
overall
frame
height
structural
opening
height
structural
opening
height
frame
thickness
overpanel
height
overpanel
height
overpanel
height
fanlight
height
a
b
b
b b
frame
thickness
a
b
b
b
frame
thickness
a
b
b
b
frame
thickness
a
frame
thickness
a
structural opening width
leaf width leaf width leaf width
frame
thickness
a b
frame
thickness
a b
frame
thickness
ab
frame
thickness
abc
partition
width
Double action single leaf Double action pair of leaves
leaf width
frame
thickness
a b
frame
thickness
ab leaf width leaf width
frame
thickness
a b
frame
thickness
abc
overall frame width

Page /31.
Effective clear width
(door stop to projecting ironmongery)
(door stop to door leaf)
300mm minimum
unless door is
power operated
(door stop to projecting ironmongery)
(door stop to door leaf)
300mm minimum
unless door is
power operated
Effective clear widths
The clear opening width is measured up
to any projecting door item including
furniture as shown below.
A space of at least 300mm is generally
required next to the leading edge of the
door to enable wheelchair users to reach
and grip the handle, unless the door is
power operated. Door opening furniture
should be operable with one hand
(e.g. lever action).
Please note: Weatherboards where fitted should be
taken into consideration.
New buildings (mm)
800
800
825
1000
Existing buildings (mm)
750
750
775
775
Direction & width of approach
Straight-on (without a turn or oblique approach)
At right angles to an access route at least
1500mm wide
At right angles to an access route at least
1200mm wide
External doors to buildings used by the
general public
Minimum clear widths
Door open restricted to 90° Door opening angle unrestricted

More than a door.
04 Finishes.
Veneers
There are many timber species suitable
for the production of wood veneers. Any
commercially available wood veneer can
be specified as part of the Designer doorset
solution.
Wood veneers are obtained by slicing or
peeling a log to produce a thin layer of
wood of a selected uniform thickness,
usually 0.6mm. Selected logs are de-
barked and cut through their length into
halves or quarters known as ‘flitches’.
These flitches are steamed for several days
depending on their species before they are
sliced into veneer ‘sheets’. The individual
veneer sheets are the same width as the
flitch, so as cutting proceeds sheets will
change gradually in size. Each sheet, whilst
having the appearance qualities of the flitch
will be of very slightly different appearance
from both preceding and following sheet.
After cutting, the reassembled flitches are
cured and dried. The job of the veneer
matcher, which is highly skilled, is to use
the available raw material to produce
combinations of veneers or ‘lay-ons’ in
accordance with the given appearance
specification. Sheets will then be guillotined
for width and height so that when joined in
the specified style they will produce lay-ons
only slightly larger than the required panel
size. Lay-ons are produced by joining the
veneer sheets edge to edge with adhesive
or tape.
Often lay-ons are individually numbered so
that, for example, the lay-on for a matched
through overpanel face is identified with its
door leaf face at all points in the production
sequence. Unless special requirements
are called for, a reasonable veneer match
between ‘en-suite’ doors will be provided at
our discretion. Our minimum flitch widths
are 94mm for quarter cut lay-ons and
141mm for crown cut lay-ons.
There are many timber species suitable for
the production of decorative wood veneers
– samples can be provided, which are also
useful for control purposes during the
project. The technique of cutting veneers
will substantially affect the appearance of
the end product. Unless specified otherwise,
doors will be supplied with veneer over
lipping using crown cut and book matched
veneers.
The principal methods of veneer cutting are:
Quarter cut
The log is cut along its length to form four
separate flitches. These are then sliced
at 90° to the growth rings to provide
sheets which have a striped or planked
appearance when assembled.
Crown cut
The log is sliced along its length, resulting
in a figured appearance with less vertical
emphasis than quarter cut.
Rotary cut
The log is peeled to give a continuous
veneer, generally used for constructional
plywood. Veneer sheets cannot be matched
except for general colour characteristics
and their appearance is wild and flowery.
Door leaves

Page /33.
Methods
The following four veneering methods
can be applied to single doors and can be
repeated over pairs of doors, overpanels
and side panels:
Consecutively laid (Slip matched)
The lay-on is assembled across the face of
the door using adjacent sheets as cut from
the flitch. Sheets are laid next to each other
in the same order and with the same face
outward, resulting in a planked effect. Also
available is random slip matched.
Book matched
Two adjacent sheets, as cut from the flitch,
are placed next to each other and one is
turned over to create a mirror image. This
can be repeated over the door and used to
create a central focus.
Quartered
The veneers are laid reversed about two
axes so that a mirror image is created in
both width and height. Sheets can be cut
and arranged to give a centred feature. All
veneered doors have hardwood lippings to
both vertical edges, softened with a 3mm
radius, or alternatively to all 4 edges. These
can either be exposed or concealed as
required. Lippings are selected to colour
match either the veneer or frame
Centre jointed
Equal numbers of sheets are used working
outwards from the centre line of the door
in width. Sheets are selected so that the
left half of the door matches the right half,
resulting in a mirror image. Alternatively
adjacent sheets can be consecutively laid.
Centre feature
An unequal number of sheets are used and
the central veneer is used for its striking
appearance. To emphasise its focal position
the remaining sheets can be laid so that
those on the left half mirror those on the
right half. Alternatively adjacent sheets can
be consecutively laid.
Contrasting inlay
Veneers from different timbers can be laid
on the same door to produce a variety of
effects ranging from subtle differences to
the most striking design statement.
Bespoke veneer options
Inspirational veneer lay-ons can be
created to complement the surrounding
environment. Using individual pieces
of veneer we are able to manufacture
doorsets that will enhance and
complement the overall architectural
environment of your project.

More than a door.
Whether it is an office, performing arts
building, hospital or school, we will work
with you to deliver your requirements.
The combination of product, design and
performance ensures we are able to
meet all your specification requirements.
Our dedicated Technical Services Team
will support you from design through to
specification.
Complete creative freedom can also be
accommodated, working in partnership
with our veneer experts to realise more
adventurous designs. Various techniques
can be used including contrasting inlays
where veneers from different timbers or
combinations of tinted and natural veneers
are laid on the same door face. A variety of
effects can be created ranging from subtle
differences to the most striking design
statement.
Hygieniform PVC
Hygieniform is an anti-bacterial high impact
PVC available in 15 colours. Hygieniform
PVC incorporates a highly effective anti-
bacterial additive, throughout the thickness
of the material, which remains integral
therein, even if scratched, providing life-long
protection against the spread of infections.
The biocidally proactive additive kills most
species of harmful bacteria and goes on
killing them for the lifetime of the material.
The additive and its active ingredient
have approvals from the Food and Drug
Administration, Health & Safety Executive
and the Environmental Protection Agency.
It has also been given a 3 Point
endorsement by the NHS Infection Control
Rapid Review Panel.
The anti-bacterial additive used in
Hygieniform PVC has been tested and
independently verified by laboratories which
endorse the 99.9% kill rate of the bacteria.
• MRSA
• Listeria
• Staphylococcus aureus
• Salmonella enteriditis
• Klebsiella pneumoniae
• Aspergillus niger
• Pseudomonas aeruginosa
• Penicillium purpurogenum
• Bacillus cereus
• Saccharmyces cerevisae
• Escherichia coli (E.Coli)
Decorative laminates
Any laminate can be used to face Designer
door leaves allowing an almost unlimited
choice of solid colours, decorative patterns
and textures to be incorporated.
Paint finishes
Designer doorsets can be fully painted with
a factory applied pigmented polyurethane
paint available in any colour within RAL or
British Standard ranges, for which colour
matched pellets are supplied to conceal
frame fixings. We can provide samples for
selection and production control purposes,
or the specifier can supply material for
colour matching.
Metal facings
Sheet metal can be bonded to the door
construction during the manufacturing
process. The facing options include
patterned and brushed stainless steel.
Patterned steel facings can also be applied
in the form of trays to fully encapsulate the
door. Steel facings can be left clean, primed
or powder-coated with the exception of
patterned stainless steel which is self-
finished.
Envision
Any appropriate photographic image,
company logo, signage, symbols or
other graphical illustrations, patterns or
visual effects can be back printed onto a
transparent facing material to any Designer
door core. Images are enlarged to the size
of the door leaf; as such, images need to
be supplied with sufficient resolution to
maintain image quality. We recommend
that all artwork be supplied at 72dpi at
actual size.
The surrounding environment needs careful
consideration when choosing an image for
your door face. A key consideration is the
guidance set out in Approved Document M
and the BS8300 Code of Practice.
04 Finishes.

Page /35.
These documents outline the requirement
for certain surfaces and features to visually
contrast with their surroundings.
Areas of particular importance include:
• Door to wall
• Architrave to wall
• Handle to door face
• Door edge to face
• Primary leaf to frames/
secondary leaf in pairs
Depending on the image or design
selection, a strong image can help you
enhance the visual contrast required,
whether it’s the handle to the door face or
the door face to the wall.
Aperture size and position and the
placement of architectural ironmongery
are important considerations in relation
to the image. A section of the image will
be replaced by the aperture, or concealed
by the ironmongery which may obstruct
certain details of the image, impacting on
the effectiveness of the door face.
Consider the placement of the following:
• Handles
• Locks
• Door closing devices
• Kick and push plates
• Signage
Envision is patented No: GB2470064.
Timber
MDF, softwood or hardwood can be painted.
Hardwood can be polished.
Hardwoods
Leaderflush Shapland Laidlaw is
independently assessed by BM TRADA to
meet the requirements of the FSC® Chain
of Custody Scheme. As a result, frames can
be specified using solid timber and timber
based raw materials exclusively from
well-managed and sustainable services
and independently certified by the Forest
Stewardship Council.
As timber is a natural material, variations in
shade and colour will occur – although this
usually diminishes over time. Frequently
used species are listed below, all of which
can be specified up to FD60.
• American White Ash
• Steamed Beech
• American Cherry
• Maple
• American Red Oak
• American White Oak
• Sapele
• American Black Walnut
Steel
Steel frames are available powder-coated
to any RAL or BS colour or supplied in a
stainless finish.
Anti-microbial protection
Our biocidally proactive additive that is
integral to the finish, provides protection
against harmful bacteria such as MRSA
and Salmonella. The additive works by
preventing the bacteria access to nutrients
so that they starve and die. It does not
employ silver technology, rendering it
completely UV stable and remains effective
for years because of its inherently low
water solubility.
Frames

Please note: Due to limitations in the print process, certain products may differ slightly in colour from those illustrated above.
Please refer to our website for the latest colours. www.leaderflushshapland.co.uk
Hygieniform PVC colour guide
Frame finishes
Oceana
Gust
Sandy
Sky
Shadow
Ivory
Neptune
Manta Grey
Musk
Emerald
Mist
Lily
Sea Green
Stone
Shiraz
04 Finishes.
More than a door.
Frames
Barum
✘
✔
✔
✔
✘
✔
✘
✔
✘
Mono
✘
✔
✔
✔
✘
✔
✘
✔
✘
Hardwood
✘
✔
✔
✔
✘
✔
✔
✔
✘
Steel
✘
✘
✘
✘
✘
✔
✘
✔
✔
Cubith
✘
✔
✔
✔
✘
✔
✔
✔
✘
Softwood
✘
✘
✔
✘
✘
✔
✘
✔
✘
Solo/Split Solo
✘
✘
✘
✘
✘
✔
✘
✔
✔
MDF
✘
✔
✘
✔
✘
✔
✔
✔
✘
Facing
Veneer
PVC/Hygieniform
Stained
Envision
Laminate
Primed
Full Paint
Left Clean
Powder Coated
Doors
✔
✔
✔
✔
✔
✔
✔
✔
✘

Page /37.
Bolection beads
05 Glazing beads
& systems.
Bolection, Flush and Steel Trim beads are offered as standard as well as
security glazing systems. These are used with various alternative details to
suit specific fire ratings, aperture shapes and sizes.
Timber beaded glazing systems
These are suitable for most aperture
shapes. Timber beads are available
polished, left clean or painted to match the
door face. They are fixed with steel pins or
cups and screws. Beads are available as
either bolection beads (not suitable for use
with Pivette doorsets) or flush beads (not
suitable for use with audiodors).
15o
16
Varies
7
6
24
7
6
20o
15/18
2
2
30
1.5
19mm
Varies
Varies
Varies
Varies
Fire rating: NR/30 mins
Material: Hardwood
Fixing method: Pin/screw
Shape: Rectangular
Square
Irregular
Circular
Hardwood Bolection 30 min
15mm
cut-out
clear view
margin
25mm
cut-out
clear view
margin
15mm
cut-out
clear view
margin

More than a door.
Bolection beads (continued)
Flush beads
24
7
6
20o
30
1.5
19mm
Varies
Varies
Varies
13o
13
15
nominal
5
6
12
9.5
7
62
5
34o
15/18
2
2
30
1.5
19mm
Varies
Varies
Varies
Varies
Fire rating: 60 mins
Material: Hardwood
Shape: Rectangular
Square
Irregular
Circular*
Fire rating: NR/30/60 mins
Material: Hardwood
Shape: Rectangular
Square
R10
R8
20mm
cut-out
clear view
margin
Steel trim
15mm
cut-out
clear view
margin
25mm
cut-out
clear view
margin
25mm
cut-out
clear view
margin
15/18mm
cut-out
clear view
margin
* Also available with a modified profile. Contact our Technical Services Team on 01773 530500 for details.
N.B. Only applicable to laminate facings.
05 Glazing beads
& systems.

Page /39.
Steel trim bead
Using a stainless steel or powder-coated
steel trim to match or contrast with the
door face. Apertures can be circular,
rectangular or square. Steel trims can be
powder-coated, coloured to match door
furniture, plates or other accessories and
are screw fixed.
12
9.5
7
62
5
34o
30
1.5
19mm
Varies
Varies
Fire rating: NR/30/60 mins
Material: Steel
Fixing method: Screw
Shape: Rectangular
Square
Circular
Irregular
20mm
cut-out
clear view
margin
Steel trim
15mm
cut-out
clear view
margin
25mm
cut-out
clear view
margin
21mm
cut-out
clear view
margin
Security
Small observation windows glazed with
laminated anti-bandit or ballistic resistant
glass are available as standard. The glass
is normally retained by high security
steel beads, with no fixings exposed on
the attack face. As standard, the bead is
supplied in a black powder-coated finish;
however a stainless steel finish is also
available. Alternative glazing materials
available include toughened polycarbonate
and 19mm Pyrosec glass – the latter
being particularly suitable for secure
accommodation such as seclusion rooms.
The standard vision panel size (reference
VB1) is 300mm square, giving a clear
viewing size of 230mm x 230mm. We
suggest that security vision panels are kept
as small as possible, with maximum clear
viewing width of 250mm.
For detailed information on radiation, 90 and 120 min fire and acoustic glazing beads and systems
please contact our Technical Services Team on 01773 530500.

06 Vision panels.
More than a door.
Glazed vision panels are often used within door leaves to let light into a
room, for aesthetic reasons or for safety (i.e. allowing people using the door
to be seen).
Glazing
Glazing has a major impact on fire
performance and limitations are identified
in the Approved Documents. Aperture
shape and position, glazed area, style
of bead and type of glass all influence
fire performance, as well as appearance.
The most commonly used aperture
configurations, all available with fire
certification up to 120 minutes, are shown
opposite.
Alternative designs can be accommodated
and these should be discussed with us at
an early stage as shape, size and position
to your choice is subject to certification
parameters.
All aperture dimensions shown in this
section relate to cut-out size. To ensure
achievement of consistent quality, specified
performance levels and fire certification,
we strongly recommend that only factory
installed glazing be used.
Those designated comply with Approved
Document Part , BS 8300 and The
Equality Act. Vision panels should be
towards the leading edge and with vertical
dimensions including at least the minimum
zones shown, either with or without a
horizontal rail. All entrance doors and
doorsets, doors across corridors and within
lobbies, and where appropriate internal
doors require vision panels for door leaves
and side panels wider than 450mm.
Acoustic doorsets can accommodate
many of our standard vision panel designs
– all factory glazed (with glass to suit
acoustic and fire performance) using fully
sealed glazing beads. Glazing generally
has a lower acoustic performance than
the door (maximum 40RwdB) and will
reduce overall performance, directly in
proportion to the amount of glazing used.
It is therefore recommended to minimise
glazing in acoustic doorsets. Contact our
Technical Services Team to discuss your
design requirements.*
Visibility requirement for doors under the Equality Act (Part M, BS8300)
100
min.
Multiple panel options
may have an accumulated
interruption in the visibility
zone of 350mm maximum
X + Y + Z < 350
1500mm
500mm
800mm350mm
max.
X
Y
Z
Multiple panel options
may have an accumulated
interruption in the visibility
zone of 350mm maximum
X + Y + Z ≤ 350

Popular vision panel aperture configurations
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
200 200
750 x 200 1450 x 200
488 x 200
1650 x 200
300 dia 300 x 300
600 x 300 750 x 400 200 x 200 200 x 200
200 200 200
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212
1106
212
406
206
1600
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
1200
406
206
200 200
Aperture TN1
Aperture TC1
Aperture TW1
Aperture TN2
Aperture TC2
Aperture TF1
Aperture TN3 Aperture TN4 Aperture TN5
Aperture TC3 Aperture TB1 Aperture TB2
Aperture TF2 Aperture TM1 Aperture TM2
750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
750 x 200 1450 x 200
488 x 200
1650 x 200
300 x 300
750 x 400 200 x 200 200 x 200
200 200 200
Equal
125 min
Equal Equal
125 min 125 min
212
406
206
400 dia
Equal
125 min
500 dia
Equal Equal
125 min 125 min
1600
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
406
200 200
re TN2
re TC2
re TF1
750 x 200 750 x 200
688 x 200
BS 8300
200 200
300 dia
600 x 300 750 x 400
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212
1106
212
406
1600
400 dia
Equal Equal
125 min 125 min
1600 1600
1106 11061200
206
Aperture TN1
Aperture TC1
Aperture TW1
Aperture TN2
Aperture TC2
Aperture TF1
200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
200
750 x 200 1450 x 200
488 x 200
1650 x 200
dia 300 x 300
x 300 750 x 400 200 x 200 200 x 200
200 200 200
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212 212
406
206
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
406
206
200 200
Aperture TN2
Aperture TC2
Aperture TF1
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
200 200
750 x 200 1450 x 200
488 x 200
1650 x 200
300 dia 300 x 300
600 x 300 750 x 400 200 x 200 200 x 200
200 200 200
Equal Equal
25 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212 212
406
206
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
406
206
200 200
Aperture TN1
Aperture TC1
perture TW1
Aperture TN2
Aperture TC2
Aperture TF1
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
200 200
750 x 200 1450 x 200
488 x 200
1650 x 200
300 dia 300 x 300
600 x 300 750 x 400 200 x 200 200 x 200
200 200 200
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212
1106
212
406
206
1600
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
1200
406
206
200 200
Aperture TN1
Aperture TC1
Aperture TW1
Aperture TN2
Aperture TC2
Aperture TF1
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 830
200 200
750 x 200 1450 x 200
488 x 200
1650
300 dia 300 x 300
600 x 300 750 x 400 200 x 200 200 x
200 200 200
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212
1106
212
406
206
1600
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x
Equal Equal
125 min 125 min
1600
1200
406
206
200 200
Aperture TN1
Aperture TC1
Aperture TW1
Aperture TN2
Aperture TC2
Aperture TF1
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300
200 200
750 x 200 1450 x 200
488 x 200
300 dia 300 x 300
600 x 300 750 x 400 200 x 200
200 200
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212
1106
212
406
206
1600
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600 1600
1200
406
206
200
Aperture TN1
Aperture TC1
Aperture TW1
Aperture TN2
Aperture TC2
Aperture TF1
Aperture TN3 Aperture TN4
Aperture TC3 Aperture TB1
Aperture TF2 Aperture TM1
BS 8300 BS 8300
1450 x 200 1650 x 200
300 x 300
200 x 200 200 x 200
200
Equal
125 min
206
75
212
419
400 x 400
Equal Equal
125 min 125 min
1600
200
e TN4 Aperture TN5
re TB1 Aperture TB2
e TM1 Aperture TM2
Aperture TN1
Aperture TN5
Aperture TF2
Aperture TN2
Aperture TC2
Aperture TM1
Aperture TN3
Aperture TB
Aperture TM2
Aperture TN4
Aperture TF1
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
200 200
750 x 200 1450 x 200
488 x 200
1650 x 200
300 dia 300 x 300
600 x 300 750 x 400 200 x 200 200 x 200
200 200 200
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212
1106
212
406
206
1600
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
1200
406
206
200 200
Aperture TN1
Aperture TC1
Aperture TW1
Aperture TN2
Aperture TC2
Aperture TF1
NR 30 60 90 120
Bolection bead ✔ ✔ ✔ ✔ ✔
Flush bead ✔ ✔ ✔ N/A N/A
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
NR 30 60 90 120
Steel trim
Security
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
* Please call our Technical Services Team on: 01733 530500 to discuss your requirements.
Page /41.
750 x 200 750 x 200
688 x 200
BS 8300 BS 8300 BS 8300 BS 8300
200 200
750 x 200 1450 x 200
488 x 200
1650 x 200
300 dia 300 x 300
600 x 300 750 x 400 200 x 200 200 x 200
200 200 200
Equal Equal
25 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
Equal Equal
125 min 125 min
212 212
406
206
400 dia
Equal Equal
125 min 125 min
1600
500 dia
Equal Equal
125 min 125 min
1600
1106
750 x 500
Equal Equal
125 min 125 min
1106 1106
75 75
212
419
1600
400 x 400
Equal Equal
125 min 125 min
1600
406
206
200 200
Aperture TN1
Aperture TC1
perture TW1
Aperture TN2
Aperture TC2
Aperture TF1
TB1 300 x 300
TB2 400 x 400

07 Privacy vision
panels & air transfer
grilles.
Visicom – 40% vision
In areas where privacy is necessary, doors
and screens that obstruct vision can
hinder the ability to monitor a room or its
occupants for safety or security purposes.
Visicom privacy vision panels can achieve
up to 60 minutes fire resistance and are
an effective and reliable solution: a dual
purpose, easy to operate vision panel that
turns a clearly open-to-view area into a
private environment (and vice versa).
Panels are available in 2 standard sizes:
• 402mm x 402mm
• 802mm x 252mm
Customised dimensions are also
available on request, please contact our
Technical Services Team.*
Highline – 90% vision
Highline is a non-fire rated self-contained
vision panel comprising a fully adjustable
blind encapsulated within the glass. The
units are contained within a powder-coated
metal frame with an integral control
knob and can be installed with timber
or steel beads. The Highline panels offer
100% privacy when closed and 90%
visibility when open due to the thin blind
construction. Panels are available up to
full height of 2.5m for use in doors and
screens.
Intelliglass® – 100% vision
Intelliglass® vision panels provide up to
60 minutes fire resistance and are the ideal
solution where privacy may be required.
When electricity is applied to the film, the
vision panel is clear. When the power is
turned off, the glass returns from clear
to obscure.
Intelliglass® is available in two
standard sizes:
• 400mm x 400mm
• 800mm x 250mm
For non-standard sizes and further
information on any of our other glazing
options please contact our Technical
Services Team.*
Louvres and grilles
Air transfer grilles or louvres can be
fitted into some Designer doors and
can achieve up to 60 minutes fire
resistance with BWF CERTIFIRE approval.
Please contact our Technical Services
Team for further details.*
* Please contact our Technical Services Team on 01773 530500 for further details.
More than a door.

01.
04.
03.
02.
01. Intelliglass® Privacy Panel. Anti-Bacterial PVC
Wrapped Door and Frame
02. Highline® Privacy Blind Vision Detail
03. New Cross Hospital, Carnival Red Single
Plasform® Doorset
04. Swindon Hospital. Single Leaf Plasform® Doorset
with Visicom® Privacy Panel
Page /43.

✔ ✔ ✔✔ ✔Enduracor
Mono, Cubith and Barum sections
Can be supplied primed for paint or fully
polished in hardwood, softwood or primed
MDF to suit particular requirements.
Alternatively frames can be wrapped in
various materials for a maintenance-free,
easily cleaned surface.
As an alternative to timber frames the Solo
and Split Solo steel frame can be supplied
either powder-coated or in a stainless steel
finish.
Pre-prepared holes are incorporated for
site fixing of frames, stops and architraves,
concealed by flush, PVC or steel discs to
match the frame finish.
Designer special sections
A wide range of other frame designs in
various materials can be provided to suit
X-ray protection, acoustic performance
and other specific requirements. Particular
requirements can be discussed with our
Technical Services Team.*
08 Frames.
Our popular frame sections are available in a wide choice of finishes. Special
sections can also be provided. Sections are produced to suit common
standard partition widths of 100, 113, 126 and 144mm, although other widths
can be accommodated.
More than a door.
* Please contact our Technical Service Team on 01773 530500 for further details.
** Pivette uses Mono Profile to jambs and Barum Profile to head.
V90
V120
Mono
N/A
✔
N/A
N/A
N/A
✔**
✔
✔
N/A
✔
N/A
✔
✔
✔
✔**
✔
N/A
✔
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
N/A
✔
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Simcor ✔ ✔ N/AN/A ✔
N/A
N/A
N/A
N/A
N/A
N/A
✔
N/A
N/A
Barum SoloCubith Split Solo
Sentinel
Lamcor
Safehinge
Audiodor
AV
Leadline
Pivette
DoorConstruction
Frame Type

Mono
One piece section incorporating an
internal rebate which eliminates dirt traps.
Architraves can be provided to match
frame finishes on request.
Cubith
Split frame design with planted stop and
radiused integral architraves. The Cubith’s
split frame is designed to accommodate
varying partition widths simplifying site
fixing.
c
b
a
d
e
Mono
b
c e
d
a
b
a
Barum
c
d
e
f
b
a
g
h
Cubith
d
e
c
b
a
Monex
d
c
e
b
a
Solo
e
d
c
b
a
Split Solo – Flush Architrave also available as standard
architrave
c
b
a
d
e
Mono
b
c e
d
a
b
a
Barum
c
d
e
f
b
a
g
h
Cubith
d
e
c
b
a
Monex
d
c
e
b
a
Solo
a: 32mm
b: 18mm
c: door thickness + 3mm
d: 94 - 169mm
e: 44mm timber
a: 32mm
b: 15mm timber
d: to suit fire rating
e: varies to suit partition
f: varies to suit partition
g: 12mm
h: 18mm
Page /45.

More than a door.
Barum
Traditional style frame with planted stop
and radiused edges. Architraves can
be provided to match frame finishes
on request.
Single action
Double action
Single action timber Double action timber
a: 32mm
b: 15mm timber
d: 94 - 169mm
e: 30, 32, 42mm
a: 44mm
d: 94 - 169mm
c
b
a
d
e
Mono
b
c e
d
a
b
a
Barum
c
d
e
f
b
a
g
h
Cubith
d
e
c
b
a
Monex
d
c
e
b
a
Solo
e
d
c
b
a
architrave
d
ec
b
a
c
b
a
d
e
Mono
b
c e
d
a
b
a
Barum
c
d
e
f
b
a
g
h
Cubith
d
e
c
b
a
Monex
d
c
e
b
a
Solo
d
c
b
a
architrave
a
b
08 Frames.

Solo Split Solo
Solo
A steel frame design which is generally
finished powder-coated or in brushed
stainless steel, particularly suited to
industrial applications. Pre-prepared holes
are incorporated for site fixing, concealed
by flush, steel cover discs to match the
frame finish. The Split Solo is also available
for varying partition thicknesses.
c
d
e
f
b
a
g
h
Cubith
d
e
c
b
a
Monex
d
c
e
b
a
Solo
e
d
c
b
a
architrave
c
d
e
f
b
a
g
h
Cubith
d
e
c
b
a
Monex
d
c
e
b
a
Solo
e
d
c
b
a
architrave
Solo d
c
e
b
bc
e
d
a
a
Split Solo
a: 32mm
b: 18mm
d: 100 - 150mm
e: 19mm
a: 32mm
b: 18mm
d: 100mm
e: varies to suit partitionAlternative
return version
Page /47.

09 Extension linings,
fanlights, overpanels
& glazed screens.
Doorsets can be supplied with extension linings, fanlights and overpanels
and incorporated into screens as outlined on pages 26, 50 and 51.
Extension lining
With the exception of Cubith where
partition thicknesses exceed 169mm,
an extension lining is used to extend
the width of the frame to fill the reveal.
All dimensions determined by performance requirements
a – 8mm b – 10mm c – 45mm - 144mm
a
b
c
a
b
a
c
b
a – 14, 18mm b – 10mm c – 10mm d – 45, 69mm
e – 2mm f – 20, 24mm
Typical application of extension lining and architraves
Extension lining
Architraves
a – 8mm b – 10mm c – 45mm - 144mm
a
b
c
a
b
a
c
b
a – 14, 18mm b – 10mm c – 10mm d – 45, 69mm
e – 2mm f – 20, 24mm
Extension lining
Architraves
a – 8mm b – 10mm c – 45mm - 144mm
a
b
c
a
b
a
c
b
a – 14, 18mm b – 10mm c – 10mm d – 45, 69mm
e – 2mm f – 20, 24mm
Extension lining
Architraves
Extension lining
a – 18mm b – 18mm c – 45mm - 169mm a – 18mm b – 55mm c – 24mm
Architraves
More than a door.

Transoms
Transoms are available for use with
fanlights and with overpanels if required.
Fanlights
Wired or unwired glass for fanlights can
be specified,* the maximum individual
pane size that can be accommodated is
1000mm wide x 2000mm high for FD30.
Alternative details for non-rated/ FD30
and FD60 fire rated fanlights, applicable to
both situations, are shown below. Profiles/
dimensions will vary depending on specific
material and finish required.
Maximum glass/
panel opening
Framing material
Bead system
Glass type
Glazing system
Solid infill panel
1000mm wide x 2000mm high
Softwood, or hardwood for polish
– minimum 410kg/m3
Hardwood – minimum 510kg/m3
Wired or unwired
Leaderseal System 36/6
As door construction, finished to suit
Wired glass – max 1494mm wide,
max 2359mm high or max 2.25m2
unwired glass – 2420mm wide,
2420mm high subject to max 2.15m2
Wired or unwired
Leaderseal System 90+
As door construction, finished to suit
Non-rated/FD30 FD60
Non-rated and FD30 Fanlight
* Glass for fanlights to be supplied by others.
FD60 Fanlight
Non-rated and FD30 Fanlight FD60 Fanlight
15mm
cut-out
clear view
margin
FD60 Fanlight
15mm
cut-out
clear view
margin
Non-rated and FD30 Fanlight FD60 Fanlight
15mm
cut-out
clear view
margin
15mm
cut-out
clear view
margin
Page /49.

Section A-A
Min
32
Min
44
Min
32
Min
44
Min
44
Varies
Min
44
Min
44
Varies
Barum Head Barum Head
Barum Transom
Barum Transom
Barum Transom
Barum Cill Barum Cill
A-A B-B
Min
32
Min
44
Varies
Min
44
Barum Head
Barum Transom
Barum Cill
B-B.2
Min
32
Min
44
Min
32
Min
44
Min
44
Min
44
Min
44
Varies
Barum Head
Barum Transom
Barum Cill
B-B
Min
32
Min
44
Varies
Min
44
Barum Head
Barum Transom
Barum Cill
B-B.2Section B-B
Key elevation for typical FD30 glazed screen
(many other conﬁgurations can be supplied)
2000
max
A
A
Solid
panel
B
Head
Mullion
Transom
B
C C
D D
Cill
Varies
Varies
Min 32 Min 32Min 44 Min 44 Min 44
Min 32 Min 44 Min 44
Barum
Jamb
Barum
Mullion
Barum
Mullion
Barum
Jamb
Barum
Mullion
Barum
Mullion
Min 44
Barum
Mullion
Min 32
Barum
Jamb
Barum
Mullion
Barum
Jamb
Varies
Min 32 Min 32Min 44 Min 44
Barum
Jamb
Barum
Mullion
Min 44
Barum
Mullion
Barum
Mullion
Barum
Jamb
Section C-C
Varies
Min 32 Min 32Min 44 Min 44
Barum
Jamb
Barum
Mullion
Min 44
Barum
Mullion
Barum
Mullion
Barum
Jamb
Section D-D
09 Extension linings,
fanlights, overpanels
& glazed screens.
Glazed screens*
Door leaves can be incorporated into
glazed screens constructed using the
Barum frame section for which we can
offer fire performance certification.
Terminology and typical screen section
combinations are illustrated here and it
should be noted that, in some situations,
safety glass will be required. Screens are
supplied ready for glazing by others on-
site and the frame section is available in
hardwood or softwood.
* Glass for glazed screens to be supplied by others.
More than a door.

Typical elevations for FD60 glazed screens
(many other conﬁgurations can be supplied)
Section A-A Section C-C
Varies
Min 44
Min 44
Min 44 Barum Head
Barum Transom
Barum Cill
Varies
Min 44
Min 44 Min 44
Min 44
Min 44
Min 44
Varies
Barum Head Barum Head Barum Head
Varies
Barum
Jamb
Barum
Mullion
Barum
Jamb
Barum Transom Barum Transom
Barum Transom
Barum Cill
Min 44 Min 44
Barum
Mullion
Min 44 Min 4
Varies
Min 44
Min 44 Min 44
Min 44
Min 44
Min 44
Varies
Varies
Barum
Jamb
Barum
Mullion
Barum Transom
Barum Cill
Min 44 Min 44
Barum
Mullion
Min 44
Alt section C-C
Varies
Min 44
Min 44 Min 44
Min 44
Min 44
Min 44
Varies
Varies
Barum
Jamb
Barum
Mullion
Barum
Jamb
Barum Transom
Barum Cill
Min 44 Min 44
Barum
Mullion
Min 44 Min 44
Section B-B
C
C
A
A
Transom
B B
Mullion
A
C
C
A
A
Transom
D
B
Transom
D
Min 44 Min 32
Barum
Jamb
Barum
Frame
Section D-D
Typical elevations for FD60
glazed screens
(Many other configurations can be
supplied).
Page /51.

10 Edge detailing,
intumescents
& seals.
Door edges and lippings
Hardwood lippings are generally applied
to vertical door edges, although they can
also be applied to top and bottom edges
where required – for example where used
externally. Timber species are usually
selected to match veneers, as outlined
on pages 32 and 33. Lippings provide
protection to the edge of the door and
specifically its face, as well as covering the
door core. Details of door edges for various
situations are illustrated below/opposite.
Astragals and angle stops
For pairs of doors, astragals are required to
cloak meeting stiles for sound reduction at
38 RwdB and radiation areas.
Where pairs of doors are used with an
overpanel but without transom, steel angle
stops are fitted for the doors to close
against.
100 100
80
Steel angle stops
3mm RAD
Softened edge for:
• Painted/primed leaves
with or without hardwood
lippings
•Veneered leaves with veneer
over lippings or exposed
lippings
6mm radiused edge:
• Postformed (PVC)
12mm rebate external pairs
(non-fire only)
12mm radiused edge:
•Postformed decorative
laminate (e .g. Formica)
100mm radius for:
• Double action (lock edge)
56mm radius for:
• Double action (hanging edge)
6mm RAD
12mm RAD
3mm RAD
56mm RAD
100mm RAD
3mm RAD
Softened edge for:
lippings
lippings
6mm radiused edge:
(non-fire only)
12mm radiused edge:
100mm radius for:
56mm radius for:
6mm RAD
12mm RAD
3mm RAD
56mm RAD
100mm RAD
3mm RAD
Softened edge for:
lippings
lippings
6mm radiused edge:
(non-fire only)
12mm radiused edge:
100mm radius for:
56mm radius for:
6mm RAD
12mm RAD
3mm RAD
56mm RAD
100mm RAD
44mm
3mm
3mm RAD
Softened edge for:
lippings
lippings
6mm radiused edge:
(non-fire only)
12mm radiused edge:
100mm radius for:
56mm radius for:
6mm RAD
12mm RAD
3mm RAD
56mm RAD
100mm RAD
Acoustic doorset Astragal
External doorset Astragal - (weather protection)
Acoustic meeting styleRadiation meeting stile
3mm chamfer for PVC
or laminate doors
More than a door.

Intumescents and smoke seals
Perimeter fire seals are essential to
performance and form an integral part
of the doorset fire rating, irrespective of
stop size. There are three types available:
intumescent, intumescent and smoke seal
combined, and concealed intumescent.
The first two systems incorporate exposed
intumescent strips to the frame jambs and
head as standard, whereas the concealed
method houses the intumescent strips
behind vertical door lippings but exposed
on top – this provides 30 minutes fire
resistance only.
Generally, exposed intumescents are
15mm x 4mm for 30 minute performance
or 2 no 15mm x 4mm seals for 60
minutes. Intumescent colour is determined
by veneer selection and will be either
maple or light brown. If doorsets are
primed for paint white intumescents are
supplied as standard.
Where complete doorsets are being
supplied, all necessary intumescent seals
will be included to the frame as standard,
in order to achieve the stated performance.
In the case of pairs of fire-rated doors, a
combined intumescent and smoke seal
will be incorporated at the meeting stile of
the primary leaf corresponding with a plain
intumescent in the secondary leaf.
Where doors only are being supplied, seals
need to be specified precisely if required.
If intumescents are to be fitted by others,
they must comply with our fire certification
requirements under the BWF CERTIFIRE
data sheet or Trada Q-Mark schemes.
To reduce friction and aid compliance
with opening force requirements a PS01
compression seal is fitted in the stop to
provide smoke protection in accordance
with BS 476 Part 31.1, ‘Requirement for
Cold Smoke Protection’, providing the gap
at the bottom of the door does not exceed
3mm. If it does, an additional threshold seal
will be required.
The diagrams which follow indicate the
positions of intumescents and seals for
various fire ratings and configurations.
FD90 and FD120 doors are supplied
as part of doorsets only, including the
necessary intumescents.
Concealed intumescent for FD30
Exposed intumescent for FD60
Page /53.

Acoustic
Doorsets are supplied with all the
necessary seals fitted to either door
or frame. With acoustic doors the gap
between door and threshold on the floor
must also be sealed with contact seals or
wiping seals, depending on performance
requirements and floor finish. Thresholds
are needed and these must be level with
the door. They should be bedded on mastic
and screw-fixed direct to hard surfaces
while carpet and textured flooring should
stop either side. Low profile aluminium
thresholds may be fixed on a hardwood
packer so that the top of the threshold is
5mm above the floor finish.
Gaps between back of frame and wall must
be fully packed with mineral wool, leaving
only enough space for mastic pointing
or Ecoguard where no architrave is used.
Special care is needed to check that doors
close correctly all around, noting a slight
resistance when the door closes against its
seals.
• A level floor is essential to threshold
sealing
• Seal under the threshold and bottom of
jambs, as well as back of frame
• Frame should be plumb square and
level to ensure that seals contact fully
all around
• Seals must not be cut for ironmongery
• Never paint seals or close a freshly
painted door onto them
• Avoid damaging all seals, particularly
on the bottom edge
• Periodic checks of seals will help
maintain performance
It is possible to factory-fit recessed drop
seals into the bottom of the door leaf to
meet sound reduction criteria.
Drop seals
Drop seals should be factory-fitted at the
bottom of the door to close the gap with
the floor when the door is closed using a
mechanical system. This may be useful for
smoke containment and low level acoustic
control, particularly where the requirements
for disabled accessibility call for an
unimpeded floor surface. Where supplied
and fitted by others, we must be informed
early to adjust the door construction to
accommodate this.
Air pressure balancing
Factory-fit recessed drop seals can be
added into the bottom of the door leaf to
meet air control criteria. Air leakage test
results to BS 476 Part 31.1 under various
pressure differentials are available for air
balancing calculations.
Best practice on-site is critical, sound is
like water in that all gaps must be properly
sealed to stop leakage.
Thresholds
Thresholds may be needed for acoustic
and smoke control applications to restrict
below-door gaps, working in conjunction
with appropriate door-mounted seals.
Essential thresholds must be fixed parallel
to the bottom of the door and may be
screw-fixed directly to hard surfaces such
as concrete or smooth vinyl.
For carpet or textured/profiled vinyl
flooring, they can be fixed directly to floor
screeds.
Aluminium thresholds for acoustic
purposes should be located on a hardwood
packer (to suit the floor finish depth) with
mastic to threshold/packer and packer/
screed.
Note: Intumescent detail may vary from that shown
depending on performance and certification.
10 Edge detailing,
intumescents
& seals.
40
Aluminium threshold
5
Aluminium threshold
More than a door.

Meeting stiles
Regardless of fire rating the meeting stiles
on door pairs have bladed seals to block
the sightline.
Edge protection
Post-formed impact resistant PVC edge
protectors can be fitted to the leading edge
of the door leaf. These match the kick and
push plates ensuring total protection is
provided to both the face and edge of
the leaf.
EcoGuard™
To improve building safety, the newly
developed wedge-shaped EcoGuard™ seal
is designed for application between the
gaps of a doorframe and the surrounding
wall during installation. Its compressible
nature ensures a precise and dry fit can be
achieved in varying gap widths without the
need for messy intumescent mastic.
EcoGuard™ is a fully certified product
tested in accordance with BS 476 Part 22
and provides an even coverage around
the frame that is guaranteed to meet all
relevant fire safety regulations. Fire tested
to BS standards with EcoGuard™ fitted on
either side of the door for 30 minutes and
both sides for 60 minutes. EcoGuard™ also
meets BS smoke performance criteria
without the application of any additional
sealing and meets EN standards for
acoustics.
These characteristics are printed on each
strip so contractors can be reassured
it will satisfy building control officers
without the need for further investigation
– where mastic has been used they have
to invasively check it has been applied to
the correct depth, causing additional repair
work on-site.
Page /55.
PVC edge protector

11 Architectural
ironmongery.
Hinges
All Designer doorset solutions are supplied
with the door leaf and frame prepared for
lift off and/or fixed pin hinges.
Lift off hinge leaves are factory fitted to both
the door leaf and frame to allow simple and
quick hanging on-site.
Fixed pin hinges are factory fitted to the
door leaf.
• CE marked and tested to EN 1935:2002
- Grade 13 & 14
• Fully concealed advanced polymer
bushed bearings are low friction and
maintenance free
• CERTIFIRE approved
• Independently tested to 1 million cycles
• Fully radiused corners to suit factory
machined preparation and security
• Stainless steel - Grade 304 (Grade 316
also available)
• BSS - brushed stainless steel finish
• SZP - satin zinc plated
• 25 year guarantee
Also available as a combination lift off and
fixed pin which allows the supply of doors
with 2 No. lift off hinges to allow quick
hanging with the addition of 1 No. fixed pin
hinge for security.
Flush bolt
Lever action flush bolt, primarily intended
for mounting in the leading edge of the
normally closed leaf of a pair of doors or a
leaf and a half.
• Smooth lever action
• Supplied as a pair for the top and
bottom of the door
• Supplied with flat keep for fitting
to underside of head frame (for
top bolt)
• Certified to BS EN 12051
• Bedded in intumescent to meet fire
certification requirements
• Radius end suitable for factory
machined preparation and security
• Solid satin stainless steel grade 304
• 10 year guarantee
Integrated performance critical ironmongery enhances the doorset
guarantee from 1 year to 10 years and is made up of hinges, flush bolts,
locks and latches, slide track closers and automatic drop seals
as appropriate.
More than a door.

06. Mortice Lockcase
07. Cylinder & Turn
08. Flush Bolt
09. Access Control Unit
01. Butt Hinge
02. Flush Bolt
03. Lift Off Hinge
04. Lift Off Hinge
05. Lever Handle
01. 02. 03.
04.
08.
09.
Page /57.
07.
05.
06.
Examples of ironmongery typically prepared for the integrated doorset

Locks and latches
Whilst the choice of other architectural
ironmongery is not limited, we offer a high
quality European style lockcase range as
standard through our integrated doorset
product. The range of mortice lockcases
has the following features:
• CE marked and fully compliant with
EN 12209
• Modular design across a range of lock
functions
• Conforms to the dimensional
standards of DIN18251
• 60mm backset suitable for BS 8300
conformity
• 72mm and 78mm (bathroom lock)
centres
• Patented spring clip follower to retain
lever spindles (where requested)
• Bolt through furniture fixings at 38mm
centres
• Single piece stainless steel forend with
satin finish
• Springing suitable for unsprung lever
furniture
• Radiused forend and strike plates for
factory preparation
• Quick reversible guided latchbolt for
site handing
• 20mm double throw deadbolt
Functions available include:
- Sashlock
- Deadlock
- Latch
- Bathroom lock
- Escape Sashlock
- Nightlatch with anti-thrust
- Bathroom deadlock
Slide track closers
Surface mounted cam action door closers
with slide track arm arrangement. The non
projecting track makes it less vulnerable
to abuse.
• Fully compliant with BS EN 1154
• CE marked
• Adjustable power unit for
EN size 2 - 4 (2320)
EN size 2 - 5 (2720)
• Fully fire tested to BS EN 1634 and
suitable for use on timber fire doors up
to FD60
• Fully adjustable for closing speed and
latch action
• Hold-open (Mechanics)
• Backcheck and delayed action
• Electromagnetic hold open
• Suitable for mounting in regular
transom and parallel positions
• CERTIFIRE approved
• Supplied in a Satin Stainless Steel
(SS) or Silver powder-coated finish
11 Architectural
ironmongery.
More than a door.

04. Fire Rated Door Closer
05. Sash Lock
06. Slide Track Closer
01. Lockcase
02. Lever Furniture
03. Cylinder & Turn
04.
03.
05. 06.
01.
02.
Page /59.

Automatic drop seal
Concealed in the bottom edge of the
door, the seal has a lightweight spring
mechanism which is activated as the door
opens/closes. The seal protects as a smoke,
draft and acoustic barrier.
• Self-levelling, lightweight sprung
mechanism
• Smoke seal tested to BS 476: Part 31
• Adjustable to suit door gap from
1 - 12mm
• Suitable for single swing doors only
• Aluminium section with soft silicon
bubble seal
• Tested to 100,000 cycles
• Suitable for fire door applications up to
FD60
Please Note: To achieve sound reduction,
the drop seal must close onto a hard
surface.
Pivette and Sentinel ironmongery
Pivette and Sentinel doorsets are supplied
complete with all essential ironmongery to
ensure that the performance characteristics
– opening force, sound reduction, smoke
control and fire resistance – are maintained.
The ironmongery pack supplied will vary
according to the performance and finish
specified.
Protection plates
Push, kick and general protection plates can
be factory fitted. These are recessed flush
with the face or surface mounted, and fixed
with screws or bonded in place. This can be
carried out on-site by others. Typical
200mm wide plates can be applied in
different combinations. Plate thickness will
be adapted to suit and they may need to
be balanced where larger plates are used
(except when screw fixed only).
11 Architectural
ironmongery.
A
B C
A Kickplate
B Push plate (horizontal)
C Push plate (vertical)
More than a door.

02.
03.
01.
01. Automatic Drop Seal
02. Great Ormond Street Hospital, Push & Kick Plates
03. Southern General Hospital, Lever Furniture
The overall aesthetics are enhanced
by combining performance and non-
performance critical architectural
ironmongery.
For full details of the Leaderflush Shapland
Laidlaw architectural ironmongery
ranges please contact the Architectural
Ironmongery Sales Team:
ironmongery@leaderflushshapland.co.uk
Tel: 01773 530500
Non-performance critical
architectural ironmongery
Page /61.

Installation &
maintenance.
Designer doorset solutions should be considered as late second fix items, not for
installation until all ‘wet trades’ have finished.
Installation made easy
All frame sections are supplied pre-bored
and countersunk ready for fixing with
wood screws, proprietary expanding bolt
systems or self-tapping screws. Matching
discs are provided to conceal fixings.
Hinges are recessed as standard, lock
bodies and flushbolt bodies are factory
recessed where Leaderflush Shapland
Laidlaw architectural ironmongery
packages are supplied.
EcoGuard™ frame to wall seal is designed
for application between the gaps of a
doorframe and the surrounding wall
during installation. Its compressible
nature ensures a precise and dry fit
can be achieved in varying gap widths
without the need for messy intumescent
mastic.
All doorsets are carefully wrapped
and protected to avoid damage during
transportation. To simplify handling,
doors and frames are packaged
separately. All items are carefully labelled
for straightforward reassembly on-site.
To avoid damage on-site, it is important
that doorsets are stored in dry conditions,
with a relative humidity of 40% to 60%,
and stacked flat on a minimum of
3 bearers.
Our guarantee does not cover wilful
neglect or unskilled installation or
any defects which were visible before
the installation of the product but not
reported within seven days of delivery.
Low maintenance
For paint and laminates, a soft duster
or soap and water will usually clean the
surface satisfactorily to maintain the
appearance of painted and laminate
facings. Colour paints are available
to repair scratches or other damage.
Hardwood veneers and timber frames/
screens should be cleaned with a soft
duster. If desired, proprietary furniture
polishes can be applied, however, please
ensure doors are dusted first. Glazing
should be cleaned with warm water and
a non-abrasive detergent or a proprietary
glass cleaner.
Powder-based cleaners, bleaches or
ammonia should not be used as they can
leave a residue unless carefully rinsed
off. We recommend proprietary cleaners
to be tested on a small area prior to
cleaning large areas.
On-site modification
We can supply doors with provision
for on-site glazing but cannot certify
work carried out by others and in such
cases certification must be established
separately.
Any on-site modification of the door leaf
such as reducing the size or cutting of
apertures will invalidate our guarantee or
performance certification. Please contact
the Technical Services Team* for further
advice and guidance.
A full technical installation guide is
available to download online at
More than a door.
* Please contact our Technical Services Team
on 01773 530500 for further details.

Manchester Joint Hospitals
Page /63.

Compliance.
Tried & tested.
Fire
Fire resistance is one of the most
fundamental performance criteria for
doorsets. Leaderflush Shapland Laidlaw
doorsets are third party certificated by the
BWF CERTIFIRE certification scheme or the
BM TRADA Q Mark scheme and comply
with Part B of the Approved Documents.
Doorsets supplied under the BM trada
Q-mark scheme are fitted with coloured
identification dowels signifying their fire
rating. Doorsets supplied under the BM
trada Q-mark scheme are fitted with
coloured identification dowels signifying
their fire rating.
Smoke
It is now generally acknowledged that,
in the event of fire, it is smoke that is
the major risk to occupants. Appropriate
smoke seals and intumescents are
automatically included with our doorsets to
suit performance requirements.
Sound
Part E of the Approved Documents 2013
includes quantifiable acoustic performance
levels. Designer doorset solutions offer up
to 46RwdB sound reduction and include
appropriate seals to suit performance
requirements.
Durability
Designer doorset solutions meet the
requirements of EN 1192 for strength
classification and EN 12400 for
mechanical durability.
Radiation
Designer radiation doorsets meet the
requirements of Public Health England
(PHE) in regard to lead thickness and
radiation levels.
Mobility & access
Designer doorset solutions comply with
Part M and consider additional BS 8300
provisions for accessibility.
Security
Leaderflush Shapland Laidlaw has
developed a physical attack test procedure
and provides doorset solutions for
situations requiring resistance against
forced entry, vandalism and more
serious burglary.
Quality control
We have implemented 100% pre-delivery
inspections to ensure all products are
checked across all manufacturing sites,
ensuring the highest quality standards.
FSC® certified (TT-COC-001844)
Leaderflush Shapland Laidlaw is
independently assessed by BM TRADA to
meet the requirements of the FSC® Chain
of Custody scheme.
ISO 9001
We operate a quality management system
which complies with the requirements of
ISO 9001:2008.
ISO 14001
We operate an environmental system
which complies with the requirements of
ISO 14001.
ISO 18001
We operate a health & safety management
system which complies with the
requirements of ISO 18001.
More than a door.

01. Southern General Hospital, White Laminate,
Equal Pair
02. Newfield & Talbot School, Grey Laminate with
Graphics on, Equal Pair
03. Bristol City Academy
04. Nottingham High School, Steamed Beech Veneer,
Single Door
01. 02. 03.
04.
Page /65.

Service &
technical
support.
Service.
We are workinghard to be the right partner
with the right resources deliveringthe
right results for every single customer.
With dedicated project management and
contract co-ordination teams, we provide
seamless engagement once your order has
been placed, clarifying your requirements
and pro-actively closing out manufacturing
information through to a timely resolution
to ensure accountability and delivery.
Technical support.
Remember, you always have access to our
technical expertise. Our aim is to deliver
ultimate reliability, so you can depend on us
to share our knowledge to give you the
competitive edge.
We want to deliver ultimate reliability
through exceptional customer service
and technical expertise.
We are here to help: 01773 530500

Account management.
Where appropriate we will designate
one point of contact ensuring a clear,
accountable line of communication.
Project management
To ensure a smooth customer journey and
complete peace of mind, we are delivering
ultimate reliability through clearly defined
processes, bringing you a consistently great
service.
Contract co-ordination team
As soon as you contact us with an order,
you can be confident our co-ordination
team will make immediate progress,
ensuring timely resolution of detail, getting
the right product into manufacture and
delivered on time.
Project monitoring and customer
communication
Our customer communication team
monitors your project with a view to
delivery so you know, at all times, where
your order is and when you can expect it.
Extensive sales support
We have regional business centres
strategically placed throughout the UK.
Aftercare team
We have a national team of expert joiners
providing on-site training and aftersales
support.
Small Orders Team
We have a dedicated team to provide focus
and support on smaller orders.
Page /67.

Leaderflush
Shapland Laidlaw.
Delivering industry leading solutions.
We manufacture performance doorsets
and supply architectural ironmongery.
We are a leading partner, providing
performance doorsets.
As a single source supplier of performance
doorsets and architectural ironmongery,
we can satisfy diverse customer needs,
allowing you to benefit from our extensive
manufacturing capability, technical
expertise and innovative product solutions,
whilst selecting complementary products
and systems from one partner.
Our aim is to deliver ultimate reliability,
we have a clear strategy that includes
continued investment in the business
along with streamlining and efficiency
measures. That means you can depend
on us to provide outstanding service
and support. We fully understand that
our performance translates to your
performance so throughout the entire life
cycle of your project – from design through
to installation – we share our knowledge
and expertise, effectively managing your
project and consistently adding value.
Everything we do is underpinned by
robust project management. Our clearly
defined processes have the sole aim of
delivering the right product on-site, on
time. This includes, where appropriate, a
single point of contact – a key decision
maker - between your construction site
and our manufacturing site so you receive
consistently great service.
More than a door. Page /69.

Leaderflush Shapland Laidlaw
Milnhay Road, Langley Mill,
Nottingham NG16 4AZ
V.01/15

Designer doorsets bring design and performance together

Recommended

Recommended

More Related Content

Similar to Designer doorsets bring design and performance together

Similar to Designer doorsets bring design and performance together (20)

Designer doorsets bring design and performance together